Meshroom S
USER GUIDE
用户指南 / Guide de l'utilisateur / ユーザー ガイド / 사용자 설명서
Brand: SSUPD
Introduction
介绍 / Introducción / はじめに / 시작하기
Case Overview
机箱概述 / Resumen de la caja de la computadora / コンピュータのケース情報 / 차대개요
A detailed illustration of the SSUPD Meshroom S PC case, a compact tower design with a mesh front and top, and a solid side panel. The diagram shows the overall dimensions and layout.
| Specification | Details |
|---|---|
| Form Factor | Mini ITX / Mini DTX / Micro-ATX / ATX |
| Case Volume | 14.9 Liters |
| Dimensions | 247 mm x 167 mm x 362 mm (L x W x H) |
| Graphics Card | Full Length GPU: Up to 336 mm Length (on 4 slots) with 157 mm Tall Up to 332 mm Length (on 3 slots) with 157 mm Tall Small Form Factor GPU: Up to 211 mm Length (without Radiator) |
| CPU Cooler | Up to 74mm Height with 3 Slots GPU; 54mm Height with 4 Slots GPU |
| Power Supply | ATX (Up to 170mm Length) / SFX-L / SFX |
| Storage | Up to 3 x 2.5" SSD (with Full Length GPU) Up to 2 x 3.5" HDD and 4 x 2.5" SSD or 8 x 2.5" SSD (with Small Form Factor GPU) |
| Expansion Slots | Full Length GPU: Up to 4 Slots Small Form Factor GPU: Up to 3 Slots |
| Front I/O | USB Type A 3.2 Gen 1 x 2; Type-C 3.2 Gen 2 |
| Fan Options | 2 x 120mm / 2 x 140mm Fans |
| Water Cooling | 1 x 240mm / 1 x 280 mm (Up to 335 mm Length) / 2 x 120mm Radiator |
| PCI-E Riser Cable | 140 mm Length; 90 Degree Angel Connector |
Chassis Components
An exploded view diagram of the SSUPD Meshroom S chassis, showing all individual components with corresponding numbers. Key parts include: 1. Chassis, 2. Side Panel, 3. Front Panel, 4. Top Panel, 5. Top Frame x2, 6. Spacer, 7. 120mm Fan Bracket, 8. Side Fan Bracket, 9. GPU Mounting Strut, 10. Front I/O, 11. Power Button, 12. Motherboard I/O Cover, 13. SFX PSU Bracket, 14. GPU Bracket, 15. PCIe Riser Card, 16. PCI Bracket, 17. PCI Slot Cover x3.
Accessory Box Contents
配件包内容/Zubehörbox - Inhalt / Contenu de la boîte d'accessoires / Contenido de la caja de accesorios / アクセサリ ボックスの内容 / 부속품 상자의 내용
- PSU / GPU Screw (#6-32): x 6
- 2.5" Drive Screw (#M3): x 16
- Bracket Screw / Chassis Screw (#6-32): x 4
- Motherboard Screw (#6-32): x 17
- GPU Mount Strut Screw (#6-32): x 1
- PCIe Standoffs (Silver) (#6-32, 5mm): x 4
- Motherboard Standoffs (Black) (#6-32, 6.5mm): x 2
- PCIe Extent Standoffs (Black) (#6-32, 10mm): x 6
- PCI Slot Cover: x 1
- Multi Function Bracket: x 1
- 2.5" Drive Screw (#M3): x 8
- Fan Screw: x 8
- Cable Ties: x 6
- Spacer: x 1
- Rubber: x 1
- 90 degree HDMI Cable: x 1
Case Build Examples
机箱配置示例/ Ejemplos de construcción de carcasas / ケースのビルド例/ 케이스의 빌드 예
Example 1: AIO Cooling with Full Length GPU
Configuration: AIO Cooling with Full Length GPU
Radiator: 280mm AIO
GPU: Full Length GPU (Up to 332mm on 3 slots)
PSU: ATX PSU (Up to 150mm)
Storage: 2 x 2.5" Drives
A side view illustration of a PC build featuring a 280mm AIO liquid cooler with a visible pump/radiator unit, a full-length GPU, an ATX power supply, and two 2.5" drives. The layout shows components within the Meshroom S chassis.
Example 2: Air Cooling with 3.5" Drives and Small Form Factor GPU
Configuration: Air Cooling with 3.5" Drives and Small Form Factor GPU
CPU Cooling: Air CPU Cooler
GPU: Small Form Factor GPU
PSU: ATX Power Supply (Up to 170mm)
Storage: 2 x 2.5" Drives + 2 x 3.5" Drives
Fans: 2 x 140mm Front Fans
A front and side view illustration of a PC build featuring an air cooler for the CPU, a small form factor GPU, an ATX power supply, two 2.5" drives, two 3.5" drives, and two 140mm front fans. The layout shows components within the Meshroom S chassis.
Builder's Guide
安装指导 / Guía de montaje / ビルダー ガイド / 빌더 가이드
Remove the Panels
拆除面板 / Retire los paneles laterales / パネルを取り外します / 패널 제거
Illustration showing the removal of the side panels from the PC case chassis. Arrows indicate the direction of removal.
Remove the Top Frame
拆除上支架 / Desmontar el marco superior / トップフレームを取り外す / 상단 프레임 제거
Illustration showing the removal of the top frame. It indicates using #6-32 screws (x1 and x4) to detach the frame. Arrows show the direction of removal.
Install 2.5" Drives
安装2.5吋硬碟 / Instalar unidades de 2,5" / 2.5″ インチドライブの設置 / 2.5" 스토리지 설치
Illustration showing the installation of 2.5" drives into the chassis using #M3 screws (x8).
Install the Motherboard
安装主机板 / Instale la placa base / マザーボード アセンブリの取り付け / 마더 보드 조립품 설치
- Keep PCIe card under the motherboard. 显卡排线保持在主板下方.
- Install the Motherboard and PCIe card. 安装主机板和显卡排线. Instale la placa base y la tarjeta PCIe. マザーボードとPCIeカードの設置. 마더 보드 조립품 PCIe 카드 연결 설치.
Illustration showing the motherboard being installed into the chassis. A note indicates to ensure the PCIe card plug is fully inserted into the bottom of the PCI slot. Uses #6-32 screws (x4).
Install the Power Supply
安装电源 / Instale la fuente de alimentación / 電源装置の取り付け / 전원 공급 장치 설치
Illustrations showing the installation of SFX and ATX power supplies. SFX PSU installation uses #6-32 screws (x3). ATX PSU installation uses #6-32 screws (x4).
Install the Graphics Card
安装显示卡 / Instale la tarjeta gráfica / グラフィック カードの取り付け / 그래픽 카드 설치
Illustrations showing the installation of a graphics card into the chassis. Uses #6-32 screws (x2 and x1).
Install Front 240mm Radiator
安装240mm水冷 / Instalar el 240mm radiador / 240mm ラジエーターのインストール / 240mm 라디에이터 설치
Illustration showing the installation of a 240mm radiator at the front of the case. Screws are dependent on the specific radiator model.
Install Front 120mm Fans
安装120mm风扇 / Instalar los ventiladores 120mm / 120mmファンのインストール / 120mm팬 설치
Illustration showing the installation of 120mm fans at the front of the case. Uses screws (x8), dependent on fan model.
Install Front 280mm Radiator
安装280mm水冷 / Instalar el 280mm radiador / 280mm ラジエーターのインストール / 280mm 라디에이터 설치
Illustration showing the installation of a 280mm radiator at the front of the case. Screws are dependent on the specific radiator model.
Install Front 140mm Fans
安装140mm风扇 / Instalar los ventiladores 140mm / 140mmファンのインストール / 140mm팬 설치
Illustration showing the installation of 140mm fans at the front of the case. Uses screws (x8), dependent on fan model.
Cable Management Tips
整线建议配置 / Consejos para la gestión del cableado / ケーブル配線のヒント / 케이블 팁
Illustration showing suggested cable routing and management within the chassis to maintain a clean build.
Connect I/O Cables
连接I/O线 / Conecte los cables para E/S / I/O 用の接続ケーブル / I/O 케이블 연결
Illustration showing the connection points for front panel I/O cables, including POWER SW, 2 x USB 3.1, and USB 3.2 Gen2 headers on the motherboard.
Optional Steps
可选步骤 / Pasos opcionales / 任意の手順 / 선택적 단계
Prepare Expansion Slots
准备4槽显示卡槽 / Prepare 4 ranuras de expansión / 4つの拡張スロットを準備します / 확장 슬롯 4개 준비
Illustrations showing how to prepare the chassis for 3-slot or 4-slot expansion cards by installing specific brackets. Uses screws (x1).
Adjustable Graphics Card Length
调整显示卡高度 / Ajusta la altura de la tarjeta gráfica / 調整可能なグラフィックカードの長さ / 조정 가능한 그래픽 카드 길이
Illustration showing how to adjust the GPU mounting strut to accommodate different GPU lengths and connector spaces. It details the maximum GPU lengths for 3-slot (332mm max) and 4-slot (312mm max) configurations, with a minimum height of 25mm and 45mm respectively. Uses #6-32 screws (x4) and #6-32 Black screws (x4).
Graphic Card Half Slot Away From Mobo
显示卡移动半槽 /
Illustration showing how to mount a GPU half a slot away from the motherboard using a specific bracket. This configuration supports 2.75 slot GPUs in 3 slot mode and 3.75 slot GPUs in 4 slot mode, aiding cable management. Uses #6-32 Black (10mm) screws (x2).
Folding PCIe Riser Cable
弯折显卡排线 /
Illustration showing the installation of a folding PCIe riser cable with a 120mm slim fan (15mm max thickness). Uses screws (x2).
Install 2.5" Drives (with Brackets)
安装2.5吋硬碟 / Instalar unidades de 2,5" / 2.5″ インチドライブの設置 / 2.5" 스토리지 설치
Illustration showing the installation of 2.5" drives onto mounting brackets. Uses #M3 screws (x4), #6-32 screws (x2), and a #6-32 screw (x1).
Install Top Slim 140 Fan
安装顶部140薄风扇 /
Illustration showing the installation of a top slim 140 fan. It requires 3D printed parts (provided on website) and uses #6-32 screws (x2). The diagram also shows front and rear bracket files and mentions using a 4-slot file in 4-slot mode. It also indicates 'Remove the top frame' before installation and notes a height of 15mm max.
Install the Small Form Factor GPU
安装短版显示卡 / Installation grafikkarte / Installer la carte graphique / Instale la tarjeta gráfica / スモールフォームファクタGPUをインストールする / 소형 폼 팩터 GPU 설치
Illustrations showing the installation of a small form factor GPU. This process requires a 20cm PCIe riser card (additional purchase). Uses #6-32 screws (x2), #6-32 Black screws (x2), and #6-32 screws (x2).
Install Drive Bracket and 2.5″/ 3.5″ Drive
安装硬碟架 2.5”或3.5”硬碟 / Instale una unidad de 2.5” y 3.5″ / ハードドライブブラケットと2.5インチ/3.5インチハードドライブを取り付けます / 하드 드라이브 브래킷 및 2.5 인치 /3.5 인치 하드 드라이브 설치
Illustrations showing the assembly of drive brackets for 2.5" and 3.5" drives. The diagram indicates that '*H - 3.5"HDD' and '*S - 2.5"SSD'. The installation uses #6-32 screws (x2), #M3 screws (x8), and #6-32 screws (x4). It then shows the drives mounted in the chassis.
Adjustable SFX Power Supply Position
调整SFX电源位置 / Ajustar alimentación SFX posición / 調整可能なSFX電源位置 / 조정 가능한 SFX 전원 공급 장치 위치
Diagrams illustrating two adjustable positions (Position 1 and Position 2) for mounting an SFX power supply within the chassis.
Warranty and Service
保固与支持 / Garantía y servicio técnico / 保証とサービス / 보증 및 서비스
Limited Warranty and Limitations of Liability
SSUPD provides a non-transferable warranty to the purchaser of SSUPD products purchased from our website, unless otherwise indicated on our website, listing, or other related materials. SSUPD warrants that the product will be free from defects in material and workmanship for a specified period commencing on the date of purchase. Except where prohibited by applicable local law, this warranty is limited to the original purchaser and is non-transferable. This warranty provides you with specific legal rights, and you may have additional rights that vary under local laws.
Warranty Periods:
- All computer enclosures and parts have a 1-year warranty.
- All refurbished or factory reconditioned enclosures and parts have a 1 year, replacement-only warranty.
Exclusions:
This warranty does not cover problems or damage resulting from, but not limited to, any of the following:
- Wear and tear associated with normal use.
- Any modification, abuse, accident, disassembly, misapplication, or unauthorized repair.
- Removal of any manufacturer label(s) or sticker(s).
- Any improper operation, including any use not in accordance with any supplied product instructions.
- Any other cause which does not relate to a product defect in materials or workmanship.
Limitations of Liability:
SSUPD shall not be liable for any special, incidental, indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or data (whether direct or indirect) or commercial loss for breach of any express or implied warranty on your product even if SSUPD has been advised previously of the possibility of such damages. Some local laws do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so this limitation or exclusion may not apply in your jurisdiction.
Support and Service
For more information about warranty coverage and service, please visit us online: ssupd.com/pages/limited-warranty
To learn more about this case visit the product page at ssupd.com.
If you have any questions with the SSUPD product you purchased, please don't hesitate to contact us using our contact system: ssupd.com/pages/support
Please include a detailed explanation of your problem and your proof of purchase. Lastly we would like to thank you for your support by purchasing this product.
