1. Úvod
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Figure 1: Procolored F13 Panda DTF Printer.
2. Bezpečnostní informace
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození tiskárny:
- Ujistěte se, že je tiskárna umístěna na stabilním a rovném povrchu.
- Connect the printer to a grounded power outlet with the correct voltage (AC 100-230V).
- Nevystavujte tiskárnu vodě ani nadměrné vlhkosti.
- Během provozu držte ruce mimo pohyblivé části.
- Use only recommended inks and cleaning solutions.
- Uchovávejte mimo dosah dětí.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Procolored F13 DTF Printer
- Roll Film 13"
- DTF Ink Set (CMYK+WW)
- Nozzle Protection Fluid
- DTF Powder
- Plastová podpěra
- Datový kabel (USB)
- Napájecí kabel
- Moisturizing Device
- Odpadní láhev
- Kazeta
- Spare Ink Tube
- Držák na válec
- Inkoustový polštářek
- Stěrač
- Řezací čepel
- USB dongle
- Stříkačka
- Šroubovák
- Roller Bar
- Prodlužovací trubice
- Needle Hub
- Jaro
- Tampon
Figure 2: Included accessories for the Procolored F13 DTF Printer.
4. Průvodce nastavením
4.1 Rozbalení a počáteční umístění
Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.
Video 1: Procolored F13 DTF Printer Unboxing. This video demonstrates the unboxing process and initial setup steps for the printer.
4.2 Instalace filmové role
Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.
4.3 Ink System Setup
Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.
Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.
4.4 Power Connection and Software Installation
Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.
Obrázek 4: Přesview of the Procolored RIP software interface and available tutorials.
5. Návod k obsluze
5.1 Preparing for Print
- Power on the printer using the main switch.
- Ensure the DTF film is correctly loaded and aligned.
- Open the Procolored RIP software on your computer.
- Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.
5.2 Proces tisku
Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.
Video 2: Procolored F13 DTF Printer in operation. This video demonstrates the printing process, including film feeding and ink application.
5.3 Následný tisk
After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.
Obrázek 5: Přamples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.
6. Údržba
6.1 Automatický čisticí systém
The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.
6.2 White Ink Circulation
The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.
Video 3: F13 L1800 DTF Apparel Printer features. This video highlights the white ink circulation and automatic cleaning functions.
6.3 Obecné čištění
Pravidelně čistěte vnější povrch tiskárny měkkým hadříkemamp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.
7. Řešení problémů
If you encounter issues with your printer, consider the following common solutions:
- Problémy s kvalitou tisku: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
- Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
- Softwarové chyby: Restart the software and the printer. Ensure your software and drivers are up to date.
- Problémy s připojením: Verify USB cable connection and ensure the printer is powered on.
For persistent issues, contact Procolored customer service.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Probarvené |
| Název modelu | F13-XMJZ |
| Technologie připojení | USB |
| Technologie tisku | Inkoustové |
| Speciální funkce | Přenosný |
| Tiskový výstup | Barva |
| Maximální rychlost tisku (barevně) | 1 ppm |
| Maximální rychlost tisku černobíle | 1 ppm |
| Rozměry produktu (D x Š x V) | 16.53"H x 34.25"Š x 16.4"V |
| Barva inkoustu | Cyan, Magenta, Yellow, Black, White, Light Cyan |
| Rezoluce | 1440 x 1440 dpi |
| Maximální velikost média | A3 (13 Inches) |
| Softwarová podpora | Windows 7/10/11 |
| Specifické použití pro produkt | Textile Printing |
9. Záruka a podpora
Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:
- Print Head and Related Components: Six-month warranty.
- Další příslušenství: Jednoletá záruka.
Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.