1. Úvod a bezpečnostní informace
Thank you for choosing the tectake Clamp Awning. This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your awning. Please read it thoroughly before installation and keep it for future reference.
1.1 Důležitá bezpečnostní upozornění
- Bezpečné ukotvení: Ensure the awning is securely anchored to prevent detachment during adverse weather conditions. Failure to do so may result in injury or damage.
- Povětrnostní podmínky: Exercise extreme caution when using the awning in windy or rainy conditions. Retract the awning during strong winds, heavy rain, or snow to prevent damage.
- Shromáždění: Assembly should ideally be performed by two adults. Follow all steps carefully.
- Děti a domácí mazlíčci: Během montáže a provozu držte děti a domácí zvířata v dostatečné vzdálenosti od markýzy.
- Inspekce: Regularly inspect all components for wear, damage, or loose connections. Do not use the awning if any parts are damaged.
1.2 Obsah balení
Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny:
- Markýzová látka (1)
- Vertical Support Poles (2)
- Horizontal Support Arms (2)
- Crank Handle (1)
- Mounting Hardware (screws, clamps, footpads)
- Návod k použití (1)
2. Nastavení a instalace
The tectake Clamp Awning is designed for quick and easy installation without the need for drilling. Follow these steps for a secure setup.
2.1 Příprava na instalaci
- Choose a suitable location on your balcony or terrace with a stable ceiling and floor.
- Ensure the installation area has a minimum clearance height of 211 cm and a maximum of 304 cm.
- Unpack all components and lay them out to ensure nothing is missing.
2.2 Montážní kroky
- Assemble the Vertical Support Poles: Connect the pole sections as per the diagram. The telescopic design allows for height adjustment.
- Připevnění opěrek nohou: Secure the plastic footpads to the bottom of the vertical poles. These provide stability and prevent slipping.
- Mount the Awning Fabric: Carefully attach the awning fabric to the main horizontal bar and the support arms. Ensure the fabric is correctly oriented.
- Umístění markýzy: Place the assembled awning in the desired location. Extend the vertical poles using the telescopic mechanism until they firmly clamp between the floor and ceiling. Adjust the height using the screw feet for maximum stability.
- Attach the Crank Mechanism: Install the crank handle mechanism to the designated side of the awning frame. It can be mounted on either side for convenience.


3. Návod k obsluze
Your tectake Clamp Awning offers adjustable shade and privacy with simple manual operation.
3.1 Vysunutí a zasunutí markýzy
- Insert the crank handle into the designated loop on the awning mechanism.
- Turn the crank handle clockwise to extend the awning fabric.
- Turn the crank handle counter-clockwise to retract the awning fabric.
- Extend or retract the awning to your desired projection, up to 250 cm.
3.2 Nastavení úhlu náklonu
The awning's inclination can be adjusted to provide optimal shade throughout the day.
- Locate the tilt adjustment mechanism on the support arms.
- Loosen the adjustment knobs or levers.
- Adjust the angle of the awning from diagonal to completely vertical, as needed.
- Tighten the adjustment knobs or levers to secure the desired tilt angle.


4. Údržba
Proper maintenance will extend the lifespan of your tectake Clamp Markýza.
4.1 Čištění látky
- The awning fabric is made of 100% polyester, which is waterproof and UV resistant.
- Clean the fabric regularly with a soft brush or cloth to remove loose dirt and debris.
- For stubborn stains, use a mild soap solution and lukewarm water. Rinse thoroughly with clean water and allow to air dry completely before retracting.
- Do not use harsh chemicals, abrasive cleaners, or high-pressure washers, as these can damage the fabric's protective coating.
4.2 Péče o rám
- The frame is constructed from powder-coated steel and aluminum. Wipe down the frame periodically with a damp cloth to remove dirt and prevent corrosion.
- Check all screws and connections regularly and tighten if necessary.
4.3 Sezónní skladování
If you plan to store the awning for an extended period, especially during winter or severe weather:
- Ensure the fabric is completely clean and dry to prevent mold and mildew.
- Retract the awning fully.
- If possible, disassemble and store in a dry, protected area.

5. Řešení problémů
Zde jsou řešení běžných problémů, se kterými se můžete setkat:
5.1 Awning Not Extending/Retracting Smoothly
- Zkontrolujte překážky: Ensure there are no objects blocking the awning's path or interfering with the crank mechanism.
- Inspect Crank Handle: Verify the crank handle is properly inserted and not damaged.
- Mazání: If the mechanism feels stiff, apply a silicone-based lubricant to moving parts (avoiding fabric).
5.2 Awning Feels Unstable
- Re-adjust Poles: Ensure the vertical support poles are fully extended and firmly clamped between the floor and ceiling. Tighten the screw feet for maximum tension.
- Zkontrolujte povrch: Verify that the floor and ceiling surfaces are flat and sturdy enough to support the awning.
- Povětrnostní podmínky: Retract the awning immediately during strong winds. This awning is not designed for extreme weather.
5.3 Water Accumulation on Fabric
- Nastavení náklonu: Increase the tilt angle of the awning to allow water to run off more effectively.
- Napětí látky: Ensure the fabric is taut when extended to prevent sagging.
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | 404962-1 |
| Total Dimensions (W x P x H) | 250 x 120 x 211-304 cm |
| Closed Dimensions (W x P x H) | 250 x 12 x 211-304 cm |
| Oblast pokrytí | 237 x 180 cm |
| Délka paže | 120 cm |
| Footpad Diameter | 7 cm |
| UV ochrana | UV 50+ |
| Tloušťka tkaniny | 180 g/m² |
| Hmotnost | Přibl. 8.5 kg |
| Materiály | Powder-coated steel, aluminum, 100% polyester, polyethylene, polyurethane |
| Provozní režim | Manual (Crank) |
| Montáž Vyžadována | Ano |
| Minimální světlá výška | 211 cm |
| Maximální projekční vzdálenost | 250 cm |

7. Záruka a podpora
tectake products are manufactured with quality and durability in mind. While specific warranty details may vary by region and retailer, we recommend retaining your proof of purchase.
For any questions, missing parts, or support needs, please contact your retailer or the tectake customer service directly. Contact information can usually be found on the product packaging or the retailer's webmísto.
Prosím, uveďte číslo modelu (404962-1) and purchase date ready when contacting support.