CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser User Manual

Zavedení

Thank you for choosing the CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser. This advanced system provides convenient access to purified cold and ambient water. Featuring a GAC filtration system, UV LED self-cleaning, and touchless dispense technology, it ensures a hygienic and refreshing hydration experience. This manual provides essential information for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your dispenser.

Obrázek 1: Přední strana view of the CLOVER D25-B-TL Water Cooler Dispenser.

Důležité bezpečnostní informace

Před použitím spotřebiče si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Elektrická bezpečnost: Ensure the dispenser is connected to a grounded electrical outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• Připojení vody: Connect the dispenser only to a potable water supply. Ensure all connections are secure to prevent leaks.
• Umístění: Place the dispenser on a flat, stable surface. Allow adequate clearance around the unit for ventilation.
• Děti a domácí mazlíčci: Keep children and pets away from the dispenser, especially during operation and maintenance.
• Teplota: This unit dispenses cold and ambient water only. It does NOT produce hot water.
• Poškození: Do not operate the dispenser if it has a damaged cord or plug, or if it has been dropped or damaged in any way. Contact customer support.

Obsah balení

Ověřte, zda jsou všechny níže uvedené položky součástí vašeho balení.

• CLOVER D25-B-TL Water Cooler Dispenser
• First Filter (GAC Purification System)
• Vodní potrubí
• Konektory
• Emergency Shutoff Valve
• Tubing Clips
• Uživatelská příručka

Figure 2: Included installation kit components.

Pokyny pro nastavení

1. Rozbalení: Carefully remove the dispenser and all components from the packaging. Retain packaging for future transport if needed.
2. Umístění: Position the freestanding dispenser on a level, stable surface. Ensure there is adequate space around the unit for proper ventilation, especially at the rear where the cooling coils are located. The dimensions are approximately 13.58"D x 12.2"W x 43.3"H.
3. Instalace filtru:
   • Locate the filter housing, typically at the rear or bottom access panel of the unit.
   • Insert the provided GAC purification filter into the housing as per the arrows indicating water flow.
   • Secure the filter firmly.
   

   Obrázek 3: Vnitřní view illustrating filter placement and water tubing.
4. Připojení přívodu vody:
   • Connect the water tubing from your potable water source to the dispenser's inlet using the provided connectors and emergency shutoff valve.
   • Ensure all connections are tight to prevent leaks. Use tubing clips to secure the tubing if necessary.
   • Slowly open the water supply valve to allow water to fill the dispenser's internal tank. Check for any leaks.
5. Připojení napájení: Zapojte dávkovač do uzemněné elektrické zásuvky 120 V AC.
6. Počáteční spláchnutí: Before first use, dispense several cups of water from both cold and ambient spouts to flush the system and filter. Discard this water.

Návod k obsluze

The CLOVER D25-B-TL features touchless dispense and UV LED self-cleaning for enhanced hygiene.

1. Zapnutí: Once plugged in, the dispenser will begin to cool the water. Allow approximately 1-2 hours for the water to reach optimal cold temperature (35.6°F).
2. Dispensing Water (Touchless):
   • Place your cup or container under the desired spout (cold or ambient).
   • Wave your hand in front of the sensor located above the spout. The water will begin to dispense.
   • Remove your hand to stop the water flow.
   

   Figure 4: Detail of the touchless dispense spouts and sensors.

3. UV LED Self-Cleaning: The dispenser is equipped with a UV LED self-cleaning system for enhanced water purification. This system operates automatically to maintain the hygiene of the internal water tanks. Refer to the indicator lights on the top panel for its status.

Údržba

Regular maintenance ensures the best performance and water quality from your dispenser.

1. Výměna filtru:
   • The GAC purification filter should be replaced periodically, typically every 6 months or as indicated by the dispenser's filter change indicator (if present).
   • Turn off the water supply and unplug the dispenser before replacing the filter.
   • Follow the filter installation steps in the Setup section to replace the old filter with a new one.
   • Flush the new filter as described in the Initial Flush step.
2. Čištění odkapávací misky: The ABS drip tray is easily removed for cleaning.
   • Pull the drip tray forward to remove it.
   • Empty any collected water and wash the tray with mild soap and water.
   • Rinse thoroughly and reinsert the tray.
3. Čištění exteriéru: Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
4. Internal Tank Cleaning: The UV LED self-cleaning system helps maintain internal hygiene. For additional cleaning, consult the manufacturer's website or customer support for specific instructions.

Odstraňování problémů

Než kontaktujete zákaznickou podporu, prostudujte si prosím následující běžné problémy a jejich řešení:

Specifikace

Obrázek 5: Rozměry produktu pro orientaci při umístění.

Záruka a zákaznická podpora

For warranty information, product registration, or technical assistance, please contact CLOVER customer support.

Výrobce: Jetel
Webmísto: CLOVER Official Store (obecné informace o produktu)
Konkrétní záruční podmínky a kontaktní údaje naleznete v dokumentaci k nákupu.