Godox XProII-S Wireless Flash Trigger for Sony Cameras

1. Úvod

This manual provides detailed instructions for the proper use and care of your Godox XProII-S Wireless Flash Trigger for Sony Cameras. Please read this manual thoroughly before use to ensure optimal performance and safety. The Godox XProII-S is a 2.4G TTL wireless flash transmitter designed for Sony cameras, offering features such as HSS 1/8000S, TCM Transform Function, Bluetooth connectivity, a new hotshoe locking mechanism, and a large LCD display for intuitive control.

2. Konec produktuview

The Godox XProII-S is a versatile wireless flash trigger that integrates seamlessly with Sony camera systems and Godox X system flashes. Its ergonomic design and advanced features enhance your photography workflow.

Figure 1: Godox XProII-S Wireless Flash Trigger mounted on a camera.

Klíčové vlastnosti:

• Bezdrátový systém 2.4G X: Reliable and stable signal transmission for remote flash control.
• TTL & HSS Support: Full support for Through-The-Lens metering and High-Speed Sync up to 1/8000s.
• Transformační funkce TCM: Converts TTL flash values to manual power settings for precise control.
• Bluetooth připojení: Control flash settings remotely via the Godox Flash app on your smartphone.
• Velký LCD displej: Poskytuje jasný přehled v reálném čase view of all settings and groups.
• Rychloupínací zámek: Secure and easy mounting/dismounting on your camera's hotshoe.

3. Nastavení

3.1. Instalace baterie

The XProII-S uses two AA batteries. To install:

1. Otevřete kryt prostoru pro baterie umístěný na spodní straně jednotky.
2. Vložte dvě baterie typu AA a dbejte na správnou polaritu (+/-).
3. Bezpečně zavřete kryt bateriového prostoru.

3.2. Montáž na kameru

To mount the XProII-S on your Sony camera:

1. Ensure the quick-release lock is in the unlocked position.
2. Slide the XProII-S onto your camera's hotshoe until it clicks into place.
3. Push the quick-release lever to the locked position to secure the trigger.

Figure 2: The quick-release lock on the XProII-S for secure camera mounting.

4. Návod k obsluze

4.1. Zapnutí/vypnutí

Press and hold the power button to turn the unit on or off. The large LCD screen will illuminate upon power-on.

4.2. Setting Channels and IDs

To avoid signal interference and control specific flashes, set unique channels and IDs:

1. Navigate to the channel (CH) and ID settings on the LCD.
2. Use the dial and buttons to select a channel (1-32) and ID (01-99).
3. Ensure your flash units are set to the same channel and ID.
4. Use the scan function to find the least intrusive channel in your environment.

Figure 3: Remotely triggering a flash by matching channel and ID settings.

4.3. Ovládání aplikací (Bluetooth)

For remote control, connect your XProII-S to the Godox Flash app via Bluetooth:

1. Enable Bluetooth on your XProII-S via the menu.
2. Download and open the Godox Flash app on your smartphone.
3. Hledat and connect to your XProII-S within the app.
4. Adjust flash values and settings directly from your mobile device.

Figure 4: Intuitive operation and remote control via the Godox Flash app.

4.4. TTL and HSS Functions

The XProII-S supports both TTL (Through-The-Lens) and HSS (High-Speed Sync) for versatile lighting control:

• TTL: Automaticky upravuje výkon blesku pro správnou expozici.
• HSS: Allows flash synchronization at shutter speeds up to 1/8000s, enabling wider apertures in bright conditions.

Figure 5: Achieving even exposure with TTL and HSS capabilities.

4.5. TCM Transform Function

The TCM (TTL Converted to Manual) function allows you to convert a TTL flash exposure value into a manual power setting. This saves time by providing a starting point for manual adjustments, streamlining your workflow from creative concepts to professional images.

Figure 6: Time-saving with the TCM function, converting TTL to manual settings.

4.6. Multi-Shooting Mode

When working with multiple photographers or a shared set of fixed lights, the multi-shooting mode allows your XProII-S to send a pre-set flash value to the lights, ensuring consistent output across different setups.

Figure 7: Using multi-shooting mode for consistent flash values across multiple setups.

4.7. Spouštění jedním kontaktem

Activating this feature significantly increases the speed of burst mode shooting. Flashes are triggered in rapid succession, reducing the interval between each flash for improved performance in high-speed scenarios.

Figure 8: Enhanced burst mode performance with single contact triggering.

4.8. L-858 Mode (Light Meter Integration)

The XProII-S can integrate with the Sekonic L-858 light meter, which features a built-in Godox 2.4G module. This allows direct adjustment of flash parameters through the light meter, streamlining exposure setup.

Figure 9: Direct flash parameter adjustment using the Sekonic L-858 light meter.

5. Údržba

• Udržujte zařízení v suchu. Nemanipulujte s ním mokrýma rukama.
• Use a soft, dry cloth to clean the unit. Avoid harsh chemicals or abrasive materials.
• Pokud přístroj nebudete delší dobu používat, vyjměte baterie.
• Skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

6. Řešení problémů

• Jednotka se nezapne: Zkontrolujte instalaci baterií a ujistěte se, že jsou nové.
• Blesk se nespouští: Verify that the trigger and flash unit are set to the same channel and ID. Ensure the trigger is securely mounted on the camera's hotshoe.
• Nekonzistentní výkon blesku: Check for environmental interference and use the channel scan function to find a clear channel. Ensure flash units are within range.
• Problémy s připojením Bluetooth: Ensure Bluetooth is enabled on both the trigger and your smartphone. Restart both devices and try reconnecting.

7. Specifikace

8. Záruka a podpora

The Godox XProII-S Wireless Flash Trigger comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a poruchy při běžném používání.

For technical support, troubleshooting assistance, or warranty claims, please contact your authorized Godox dealer or visit the official Godox webstránky pro kontaktní informace.