JEYI I9-Seal

Uživatelská příručka k pouzdru pro SSD disk JEYI I9-Seal M.2 NVMe

Model: I9-Seal

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Obsah balení

Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:

JEYI M.2 NVMe SSD Enclosure
Tepelné podložky
Šroubovák
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Šňůrka

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Pokyny pro nastavení

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Připravte si kryt: Gently slide open the enclosure to reveal the internal PCB.
Aplikace tepelné podložky: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Zabezpečení SSD disku: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Zavřete kryt: Carefully slide the enclosure cover back into place until it clicks securely.

Explodoval view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Návod k obsluze

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Připojit k zařízení: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Indikátor napájení: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Přenos dat: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Údržba

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Řízení tepla: Hliníkové casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Čištění: K čištění vnější strany krytu použijte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
Skladování: Pokud kryt nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
Péče o kabely: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Odstraňování problémů

Problém	Možná příčina	Řešení
Počítač nedetekoval kryt.	Volné připojení kabelu. SSD disk není správně nainstalován. SSD není inicializován/naformátován. Vadný USB port nebo kabel.	Ujistěte se, že jsou kabely pevně připojeny. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Zkuste jiný port USB nebo kabel.
Pomalé rychlosti přenosu dat.	Connected to a slower USB port (e.g., USB 2.0). Thermal throttling due to high temperature. Omezení výkonu SSD disku.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Specifikace

Funkce	Detail
Model	I9-Seal
Značka	JEJ
Hardwarové rozhraní	USB 3.2 Gen 2 (USB-C)
Rychlost přenosu dat	Až 10 Gbps
Kompatibilní typ SSD	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Maximální kapacita úložiště	4 TB
Čipová sada	JMS583 A3
Vlastnosti	UASP Support, TRIM Support, Win to Go (WTG) Support
Materiál	Hliníková slitina
Barva	Stříbro
Rozměry produktu	4.06 x 1.02 x 0.39 palce (103 x 26 x 10 mm)
Hmotnost položky	0.317 unce (9 gramů)
Kompatibilní operační systémy	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Záruka a podpora

For warranty information or technical support, please refer to the official JEYI webnebo se obraťte přímo na jejich zákaznický servis. Podrobnosti o konkrétních záručních lhůtách a kanálech podpory jsou obvykle uvedeny v dokumentaci k nákupu nebo na stránkách výrobce. webmísto.

Výrobce: JEJ

Webmísto: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.