1. Důležité bezpečnostní informace
Please read all safety instructions carefully before using the Philips GoZero Soda Lite Machine. Failure to follow these instructions may result in serious injury or damage to the product.
- Neperte nic jiného než obyčejnou vodu. Carbonating other liquids can cause excessive pressure buildup, leading to bottle rupture and injury.
- Use only Philips GoZero carbonating bottles. Other bottles may not be compatible and could cause damage or injury.
- Během procesu sycení oxidem uhličitým neodstraňujte perlicí láhev. Wait until the buzzing sound stops and all pressure is released.
- Udržujte spotřebič mimo dosah dětí. Tento výrobek není určen pro použití dětmi.
- Do not operate the machine if it appears damaged. Požádejte o pomoc zákaznickou podporu.
- Do not place the carbonating bottle in a dishwasher or expose it to extreme temperatures. Ruční mytí jemným mýdlem a teplou vodou.
- Ensure the CO2 cylinder is securely installed. Refer to the setup section for proper installation.
- Only use CO2 cylinders compatible with the Philips GoZero Soda Lite machine.
2. Konec produktuview
The Philips GoZero Soda Lite Machine allows you to create refreshing sparkling water at home with ease. Its compact design and manual operation mean no electricity is required, offering convenience and portability.
Komponenty:
- Philips GoZero Soda Lite Machine (Main Unit)
- 1-Liter Reusable Carbonating Bottle
- CO2 Cylinder (sold separately, compatible with SodaStream screw-in cylinders)
Image 2.1: Philips GoZero Soda Lite Machine (Model ADD4901BK/10)
Image 2.2: Philips GoZero 1-Liter Carbonating Bottle
3. Pokyny k nastavení
3.1 Vybalení
- Opatrně vyjměte všechny součásti z obalu.
- Recyklujte obalové materiály zodpovědně.
- Wash the carbonating bottle with warm water and mild soap before first use. Do not use abrasive cleaners.
3.2 Installing the CO2 Cylinder
- Place the soda maker on a flat, stable surface.
- Remove the back cover of the soda maker by gently pulling it outwards.
- Insert the CO2 cylinder into the opening at the bottom of the machine.
- Screw the cylinder clockwise until it is firmly secured. Do not overtighten.
- Nasaďte zpět zadní kryt a ujistěte se, že zacvakne na místo.
Note: A CO2 cylinder is not included with the machine and must be purchased separately. Ensure it is a screw-in type compatible with Philips GoZero machines.
4. Návod k obsluze
Follow these three simple steps to create sparkling water:
4.1 Fill the Bottle
- Fill the carbonating bottle with cold, plain water up to the fill line indicated on the bottle.
- Neplňte nad rysku maximálního naplnění.
4.2 Twist and Secure
- Insert the filled bottle into the soda maker by twisting it counter-clockwise until it locks securely into place.
- Ensure the bottle is upright and fully engaged.
4.3 Press to Carbonate
- Press the carbonation button located on top of the machine firmly for 1-2 seconds.
- Release the button and repeat the process 2-3 times for standard carbonation. For stronger carbonation, press more times.
- During carbonation, the integrated safety valve will automatically release pressure, indicated by a buzzing sound. This sound confirms that your sparkling water is ready.
- Once carbonation is complete, gently twist the bottle clockwise to release it from the machine.
- Enjoy your freshly carbonated water.
Image 4.1: Philips GoZero Soda Lite Machine in operation.
Image 4.2: The soda maker ready for use in a kitchen setting.
5. Údržba
5.1 Čištění stroje
- Wipe the exterior of the soda maker with a damp tkanina.
- Do not immerse the machine in water or place it in a dishwasher.
- Vyhněte se použití abrazivních čisticích prostředků nebo rozpouštědel.
5.2 Cleaning the Carbonating Bottle
- Hand wash the carbonating bottle with warm water and mild dish soap.
- Důkladně opláchněte.
- Do not wash in a dishwasher or use hot water above 40°C (104°F).
- Před uskladněním nechte lahvičku zcela vyschnout na vzduchu.
5.3 Skladování
- Store the soda maker in a cool, dry place away from direct sunlight.
- Ensure the CO2 cylinder is removed if the machine will not be used for an extended period.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Water is not carbonating. | Lahev s CO2 je prázdná nebo není správně nainstalována. | Vyměňte láhev s CO2 nebo se ujistěte, že je pevně zašroubovaná. |
| Water is leaking during carbonation. | Bottle not securely attached or overfilled. | Ensure the bottle is twisted firmly into place. Do not fill water above the indicated line. |
| Carbonation button is stuck or difficult to press. | Possible internal obstruction or damage. | Do not force the button. Contact customer support. |
| Buzzing sound does not occur. | Insufficient pressure or CO2 cylinder issue. | Ensure CO2 cylinder is full and properly installed. Press the carbonation button more firmly or for a longer duration. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | ADD4901BK/10 |
| Značka | PHILIPS |
| Rozměry (D x Š x V) | 24 x 12.5 x 42.4 cm (9.45 x 4.92 x 16.69 palce) |
| Hmotnost | 1.3 kilogramů (2.87 liber) |
| Materiál | Plast |
| Kapacita láhve | 1 litru |
| Zdroj napájení | Manuální (není potřeba elektřina) |
| Kompatibilita s lahvemi s CO2 | Screw-in type (e.g., SodaStream compatible) |
Obrázek 7.1: Rozměry produktu
8. Záruka a podpora
8.1 Informace o záruce
This Philips GoZero Soda Lite Machine is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty duration and coverage details.
8.2 Zákaznická podpora
Pro podporu k produktům, pomoc s řešením problémů nebo dotazy ohledně náhradních dílů navštivte oficiální webové stránky společnosti Philips. website or contact Philips customer service in your region. You can typically find contact information on the Philips webna webu nebo v obalu vašeho produktu.
Online podpora: www.philips.com/support