1. Úvod
This manual provides essential information for the safe and effective use of your glo HYPER+ heated tobacco device. The glo HYPER+ offers a versatile experience with both normal and high-temperature modes, allowing for personalized usage. Please read this manual thoroughly before using the device.
Důležitá poznámka: This product includes the electronic tobacco device only. It does not contain liquid or nicotine, nor does it include tobacco sticks (neostiks).
2. Obsah balení
Verify that all items listed below are included in your package. According to the product packaging, the contents are:
- glo HYPER+ Device (Main Unit)
- USB nabíjecí kabel
- Čisticí kartáč
- Návod k použití (tento dokument)
Note: Tobacco sticks (e.g., neostiks) are not included and must be purchased separately.
Image: The glo HYPER+ Starter Kit packaging, indicating the included items.
3. Nastavení
3.1 Počáteční nabíjení
- Connect the provided USB charging cable to the charging port on the bottom of the glo HYPER+ device.
- Zapojte druhý konec kabelu USB do kompatibilního napájecího adaptéru USB (není součástí balení) nebo do portu USB počítače.
- The LED indicator lights on the device will illuminate to show the charging status. A full charge typically takes approximately 90 minutes.
- Once fully charged, all LED indicators will be solid. Disconnect the device from the charger.
Poznámka: For optimal battery life, it is recommended to fully charge the device before its first use.
4. Návod k obsluze
4.1 Inserting a Tobacco Stick
- Open the top cap of the glo HYPER+ device.
- Gently insert a compatible tobacco stick into the heating chamber until it reaches the bottom. Do not force the stick.
- Close the top cap.
4.2 Zapnutí a ohřev
The glo HYPER+ offers two heating modes: Standard and Boost.
- Standardní režim: Press and hold the control button for approximately 3 seconds until the device vibrates and the LED indicators begin to light up sequentially. The device will heat for about 20 seconds.
- Boost Mode (High Temperature): Press and hold the control button for approximately 5 seconds until the device vibrates twice and the LED indicators light up more rapidly. The device will heat for about 15 seconds, providing a more intense experience.
Once heating is complete, the device will vibrate again, and the LED indicators will remain solid, indicating it is ready for use.
4.3 Používání zařízení
Inhale gently through the tobacco stick. Each session lasts approximately 4 minutes in Standard mode and 3 minutes in Boost mode, or until the device vibrates and the LED indicators turn off.
4.4 Ending a Session
- When the session ends, the device will vibrate, and the LED indicators will turn off.
- Open the top cap and carefully remove the used tobacco stick. Dispose of it properly.
- Close the top cap to prevent debris from entering the heating chamber.
Obrázek: Detailní záběr view of the glo HYPER+ device, highlighting its design and control button.
5. Údržba
Regular cleaning ensures optimal performance and longevity of your glo HYPER+ device.
5.1 Cleaning the Heating Chamber
- Ensure the device is completely cooled down before cleaning.
- Open both the top and bottom caps of the device.
- Insert the provided cleaning brush into the heating chamber from both ends (top and bottom) and gently rotate it to remove any residue.
- Tap the device gently to dislodge any loose debris.
- Close both caps after cleaning.
Doporučení: Clean your device after every 20 sessions or as needed to maintain optimal flavor and airflow.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapíná. | Slabá baterie. | Nabijte zařízení pomocí dodaného kabelu USB. |
| No vapor or weak vapor production. | Incorrectly inserted tobacco stick, device not fully heated, or dirty heating chamber. | Ensure the tobacco stick is fully inserted. Wait for the device to complete heating. Clean the heating chamber. |
| Zařízení se nenabíjí. | Vadný kabel nebo zdroj napájení. | Zkuste jiný kabel USB nebo napájecí adaptér. Ujistěte se, že jsou připojení bezpečná. |
| Přehřátí zařízení. | Continuous use or environmental factors. | Allow the device to cool down. Avoid using in direct sunlight or hot environments. If the issue persists, discontinue use and contact support. |
Pokud narazíte na problémy, které zde nejsou uvedeny, nebo pokud problém přetrvává i po vyzkoušení řešení, kontaktujte zákaznickou podporu.
7. Specifikace
- Model: HYPER+
- Značka: glo
- Rozměry (balení): 11.1 x 8.6 x 7.2 cm
- Hmotnost (obal): 310 g
- Barva: Zlato
- Zahrnuté komponenty: Main unit, USB charging cable, cleaning brush, instruction manual
- Režimy topení: Standard, Boost (High Temperature)
- První dostupné datum: 2021. 11. 23
8. Záruka a podpora
For warranty information, product support, or to report any issues, please refer to the official glo webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.