Philips Avent SCF394/62

Philips Avent Double Electric Breast Pump Advanced (SCF394/62) User Manual

Model: SCF394/62 | Brand: Philips Avent

Zavedení

This manual provides detailed instructions for the safe and effective use of your Philips Avent Double Electric Breast Pump Advanced. Designed with Natural Motion Technology, this pump combines suction and nipple stimulation to facilitate efficient milk flow. It features a soft silicone flange for comfort, a rechargeable battery for portability, and a user-friendly interface.

Obsah balení

  • 1 Dvojitá elektrická odsávačka mateřského mléka
  • 2 Flanges
  • 2 4oz. Natural Bottles with Natural Response Nipple
  • 2 Sealing Discs
  • 1 cestovní taška
  • 1 Insulated Pouch
  • 1 Pumping Belt
  • 1 Zástrčka
  • 2 Disposable Breast Pads

Montáž a počáteční nastavení

Before first use, wash all parts that come into contact with breast milk.

  1. Čisté ruce: Důkladně si umyjte ruce mýdlem a vodou.
  2. Assemble Pump Body: Push the white valve into the neck of the pump body as far as possible.
  3. Připevněte láhev: Screw the 4oz Natural bottle onto the pump body.
  4. Attach Breast Shield: Screw the soft silicone breast shield onto the pump body.
  5. Place Silicone Diaphragm: Place the silicone diaphragm into the top of the pump body and use your thumbs to firmly seal it.
  6. Attach Tube and Cap: Attach the tube and cap onto the silicone diaphragm.
  7. Connect Tubes to Motor Unit: Connect the tubes from the assembled pump kits to the motor unit.
  8. Nabíjení baterie: If the battery is low, recharge using the Micro-USB adapter. The pump features a rechargeable battery for cordless operation.

Video: Philips Avent Double Electric Breast Pump Assembly (SCF394/62). This video demonstrates the step-by-step assembly process for the breast pump components.

Návod k obsluze

The Philips Avent Double Electric Breast Pump Advanced is designed for comfortable and efficient milk expression.

  1. Umístění: Ensure the breast shield is centered on your nipple. The soft silicone flange adapts to fit both size and shape of the breast, allowing for comfortable, upright pumping without needing to lean forward.
  2. Zapnutí: Press the power button on the motor unit to start pumping.
  3. Režim stimulace: The pump will automatically start in stimulation mode to encourage milk letdown. This mode uses quick, gentle suction.
  4. Režim výrazu: Once milk starts flowing, the pump will transition to expression mode. You can also manually switch between modes.
  5. Upravit úrovně: Use the up and down arrows to select from 8 stimulation and 16 expression levels to find your most comfortable and effective setting. The pump remembers your last settings for convenience.
  6. Session Tracking: The pump display includes a timer to help you track the duration of each pumping session.
  7. Pozastavit/Zastavit: Use the pause and start buttons to control your session as needed.
Woman using Philips Avent breast pump with Natural Motion Technology

Image: Natural Motion Technology in use. The pump combines suction and nipple stimulation for quick milk flow.

Close-up of the soft silicone flange of the Philips Avent breast pump

Image: Soft silicone flange. The flexible silicone adapts to fit various breast sizes and shapes for comfort.

Icon illustrating upright pumping position

Image: Upright pumping position. Designed for comfortable pumping without leaning forward.

Hand adjusting settings on the Philips Avent breast pump motor unit

Image: Personalizing expression levels. The motor unit allows selection from 8 stimulation and 16 expression levels.

Woman wearing the Philips Avent breast pump with the included pumping belt

Image: Pumping belt in use. The included belt holds the pump, allowing for hands-free operation.

Woman placing the Philips Avent breast pump into a travel bag

Image: Portable design with travel bag. The rechargeable battery and travel bag offer freedom to pump anywhere.

Čištění a údržba

Maintaining hygiene is crucial for breast pump parts. The Philips Avent pump features a closed system, preventing milk from entering the tubing, and has few parts for easy cleaning.

  1. Demontáž: Disassemble all parts that come into contact with breast milk.
  2. Mytí: Wash all disassembled parts in warm, soapy water immediately after each use. Use a soft brush or sponge.
  3. Máchání: Důkladně opláchněte čistou vodou.
  4. Sterilizace: All parts are dishwasher safe for convenient sterilization. Alternatively, sterilize by boiling for 5 minutes or using a steam sterilizer.
  5. Sušení: Allow all parts to air dry completely on a clean surface or drying rack.
  6. Skladování: Use the provided travel bag and insulated pouch for hygienic storage between uses.
Hands cleaning breast pump parts under running water in a sink

Image: Easy cleaning. The pump has few parts, simplifying setup, use, and cleaning.

Icon indicating a closed system with no milk in tubing

Image: Closed system. Ensures hygienic expression with no milk in the tubing.

Icon illustrating few parts for easy setup, use, and cleaning

Image: Few parts. Simplifies assembly and cleaning.

Odstraňování problémů

V této tabulce naleznete běžné problémy a jejich řešení.

ProblémMožná příčinaŘešení
Nízké sáníImproper assembly, damaged silicone diaphragm/valve, low battery.Ensure all parts are correctly assembled and sealed. Check for tears or damage in silicone parts and replace if necessary. Recharge the battery.
Krátká životnost baterieBattery degradation over time, insufficient charging.Ensure full charge (up to 4 hours). Battery is non-replaceable; consider contacting support if performance significantly degrades.
Discomfort/PainIncorrect flange positioning, high suction level.Reposition the breast shield to ensure the nipple is centered. Reduce the suction level to a comfortable setting. Consult a lactation specialist if discomfort persists.
Overheating/ErrorProlonged use, internal malfunction.Discontinue use immediately. Allow the unit to cool down. If errors persist, contact Philips Avent customer support.

Specifikace produktu

  • Číslo modelu: SCF394 / 62
  • Provozní režim: Elektrický
  • Zdroj napájení: Battery Powered (Li-Ion 3.6 V 2600 mAh, non-replaceable)
  • Provozní doba: Up to 3 pumping sessions per full charge
  • Doba nabíjení: Up to 4 hours for full charge
  • Typ materiálu: Silicone (flange)
  • Kapacita: 125 Milliliters (bottles)
  • Hmotnost položky: 2.4 uncí
  • Vhodné do myčky: Ano (části, které přicházejí do styku s mlékem)
  • Další vlastnosti: Closed System, Rechargeable, Natural Motion Technology, Pumping Belt, Travel Bag, Insulated Pouch.

Záruka a zákaznická podpora

For warranty information, product registration, or technical assistance, please refer to the official Philips Avent webwebové stránky nebo se obraťte přímo na jejich zákaznickou podporu. Uschovejte si doklad o koupi pro případ reklamace.

Online podpora: Navštivte Philips Avent Store pro další zdroje a často kladené otázky.

Plány ochrany: Pro prodloužení krytí jsou k dispozici volitelné dvouleté a tříleté ochranné plány.

© 2026 Philips Avent. Všechna práva vyhrazena.