Zavedení
This manual provides essential information for the safe and efficient use of your Walfront 5V 500mA 2.5W Mini Polycrystalline Solar Panels. These panels are designed for various low-power applications, including DIY projects, experimental setups, and powering small electronic devices. Please read these instructions thoroughly before installation and operation.
Vlastnosti produktu
- Rozměry: Approximately 130 x 150 mm (5.1 x 5.9 inches) with a 2 mm (0.08 inches) thickness.
- Délka kabelu: 100 cm (39.4 inches) pre-attached cable.
- Provozní svtage: DC 5V
- Provozní proud: 0.5A (500mA)
- Maximální výkon: 2.5W
- Materiál: Polysilikon
- High conversion efficiency and power output.
- Effective performance in low-light conditions.
- Weather-resistant design, suitable for snow and wind.
- Easy to install for DIY projects.
- Ideal for solar lawn lamps, solar landscape lights, solar mobile phone chargers, solar flashlights, and various small solar toys.
Obsah balení
- 2 x Walfront 5V 500mA 2.5W Mini Polycrystalline Solar Panels
Bezpečnostní informace
- Do not attempt to disassemble or modify the solar panels.
- Avoid direct contact with the electrical terminals when the panel is exposed to light.
- Ensure proper polarity when connecting to devices. Incorrect polarity can damage the connected device or the solar panel.
- Keep the panels away from flammable materials.
- Do not immerse the panels in water. While weather-resistant, they are not designed for submersion.
- Handle with care to avoid physical damage to the panel surface.
Nastavení
The Walfront mini solar panels are designed for straightforward integration into various projects.
1. Vybalování
Carefully remove the solar panels from their packaging. Inspect for any visible damage.
2. Umístění
For optimal performance, position the solar panel in a location that receives maximum direct sunlight throughout the day. Avoid shaded areas. The panel should be angled towards the sun for best efficiency.

Image: Two Walfront mini solar panels connected to a breadboard and multimeter, demonstrating their use in a garden for experimental power.
3. Elektrické připojení
Each solar panel comes with a pre-attached cable. The red wire typically indicates the positive (+) terminal, and the black wire indicates the negative (-) terminal.
- Connect the red wire to the positive input of your device or charging circuit.
- Connect the black wire to the negative input of your device or charging circuit.
- Ujistěte se, že všechny spoje jsou bezpečné a izolované, aby se zabránilo zkratům.

Obrázek: Zadní view of a Walfront mini solar panel, highlighting the attached red (positive) and black (negative) connection wires.
Návod k obsluze
Once properly set up, the solar panels will begin generating electricity when exposed to sunlight.
1. Výroba energie
The panels convert sunlight into DC electrical energy. The output voltage and current will vary depending on the intensity of the sunlight and the load connected.
2. Optimální výkon
For maximum power output, ensure the panels are clean and positioned directly facing the sun. Any shading, even partial, can significantly reduce efficiency.

Obrázek: Přední strana view of two Walfront mini solar panels, showcasing their polycrystalline solar cells.
3. Aplikace
These panels are suitable for:
- Powering small DC motors or fans.
- Charging small batteries (requires a charge controller, not included).
- Educational projects and scientific experiments.
- DIY solar lighting or small electronic devices.
Údržba
Minimal maintenance is required for these solar panels.
- Čištění: Regularly wipe the surface of the solar panels with a soft, damp cloth to remove dust, dirt, or debris. A clean surface ensures maximum light absorption and efficiency. Do not use abrasive cleaners or harsh chemicals.
- Inspekce: Periodically check the cables and connections for any signs of wear, damage, or corrosion. Ensure connections remain secure.
- Skladování: If storing the panels for an extended period, keep them in a dry, cool place away from direct sunlight and extreme temperatures.
Odstraňování problémů
If your solar panels are not performing as expected, consider the following:
Žádný výkon
- Zkontrolujte sluneční světlo: Ensure the panels are receiving direct, unobstructed sunlight. Even partial shading can drastically reduce output.
- Čistý povrch: Verify that the panel surface is clean and free of dirt, dust, or obstructions.
- Zkontrolujte připojení: Inspect all wiring for loose connections, incorrect polarity, or damage.
- Test multimetrem: Pomocí multimetru změřte objtage output of the panel directly under sunlight. A 5V panel should show approximately 5V or slightly higher (open circuit voltage) in good sunlight.
Nízký výstupní výkon
- Úhel a orientace: Adjust the panel's angle and orientation to face the sun directly.
- Teplota: Extreme temperatures can affect solar panel performance.
- Cloud Cover: Overcast conditions will naturally reduce power output.
- Shoda zatížení: Ensure the connected device's power requirements are within the panel's capacity (5V, 500mA, 2.5W).
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 5V500mA |
| Materiál | Polysilikon |
| Rozměry (D x Š x V) | Přibližně 130 x 150 x 2 mm (5.1 x 5.9 x 0.08 palce) |
| Délka kabelu | 100 cm (39.4 palců) |
| Provozní svtage | DC 5V |
| Provozní proud | 0.5A (500mA) |
| Maximální výkon | 2.5W |
| Účinnost | 16–18 % |
| Připojení výstupu | Bare wire leads (Red for positive, Black for negative) |
Informace o záruce
Walfront products typically come with a standard manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the product packaging or contact Walfront customer support directly. Keep your proof of purchase for warranty claims.
Informace o podpoře
For technical assistance, troubleshooting not covered in this manual, or general inquiries, please visit the official Walfront webnebo kontaktujte jejich oddělení zákaznických služeb.
Webmísto: www.walfront.com
E-mail: support@walfront.com