1. Úvod
The VEVOR 5T Pneumatic Air Jack is a robust and efficient lifting device designed for various vehicles, including cars, minivans, and SUVs. Constructed from high-strength steel, this air jack offers a maximum lifting capacity of 5 tons (11023 lbs) and can raise a vehicle from 6.3 inches (16 cm) to 15.75 inches (40 cm) in approximately 3-5 seconds. Its triple airbag design ensures stable and secure lifting, making it suitable for use on diverse terrains, including soft ground, sand, or muddy roads.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Pneumatic Air Jack. Please read it thoroughly before initial use.
Image 1.1: The VEVOR 5T Pneumatic Air Jack positioned under a vehicle for lifting. It features a triple airbag design and a sturdy base with wheels for maneuverability.
Image 1.2: The VEVOR Pneumatic Air Jack demonstrating its lifting capability, supporting a vehicle with its inflated airbags. The image highlights its application for automotive maintenance.
2. Bezpečnostní pokyny
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k vážnému zranění nebo poškození majetku.
- Always read and understand the entire manual before operating the air jack.
- Ensure the jack is placed on a firm, level surface. Avoid uneven or soft ground.
- Never exceed the rated lifting capacity of 5 tons (11023 lbs).
- Always use appropriate jack stands to support the vehicle once it is lifted. Never work under a vehicle supported only by the air jack.
- Keep hands, feet, and other body parts clear of the jack and the vehicle during lifting and lowering operations.
- Ensure the air supply is clean and dry. Use an air compressor with sufficient capacity and pressure.
- Do not modify the air jack in any way. Use only original replacement parts.
- Inspect the jack for damage or wear before each use. Do not use if damaged.
- Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
- Udržujte děti a kolemjdoucí mimo pracovní oblast.
3. Komponenty produktu
The VEVOR Pneumatic Air Jack consists of several key components designed for durability and ease of use:
- High-Strength Steel Frame: Provides overall structural integrity and durability.
- Triple Airbag System: Made from rugged, high-tightness rubber to prevent air leakage and ensure stable lifting.
- Thickened Rubber Pad: Located at the top contact point, it protects the vehicle's chassis from damage during lifting.
- Ovládací rukojeť: Ergonomically designed for easy maneuvering and operation of the air valves.
- Air Inlet Valve (Green): Controls the inflation of the airbags.
- Air Release Valve (Red): Controls the deflation of the airbags.
- Durable Rubber Wheels: Facilitate easy movement and positioning of the jack, suitable for various surfaces.
Obrázek 3.1: Detail views of the VEVOR Air Jack's construction, highlighting the thickened rubber pad for chassis protection, the rugged triple airbag for durability, and the durable rubber wheels for mobility.
Obrázek 3.2: Podrobný view of the thickened rubber pad, designed to prevent damage to the vehicle's chassis during lifting operations.
Image 3.3: A close-up of the rugged triple airbag, emphasizing its high sealing performance and wear resistance for reliable and scratch-free operation.
Image 3.4: A detailed image of one of the durable rubber wheels, highlighting its suitability for various terrains, including soft or muddy surfaces.
4. Nastavení
Before using the VEVOR Pneumatic Air Jack, ensure proper setup:
- Rozbalte komponenty: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené.
- Sestavte rukojeť: Attach the control handle to the main body of the air jack using the provided fasteners. Ensure it is securely tightened.
- Připojení vzduchové hadice: Connect your air compressor hose to the air inlet valve (green valve) on the jack's control unit. Ensure a tight, leak-free connection.
- Připravte pracovní plochu: Position the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will not be lifted.
Image 4.1: The VEVOR Air Jack disassembled into its main components, including the airbag unit, handle, and control valve, illustrating its compact size for storage and ease of assembly.
Obrázek 4.2: Režie view of the VEVOR Air Jack components laid out, demonstrating its compact design and the parts required for assembly and operation.
5. Návod k obsluze
Follow these steps for safe and effective operation of your VEVOR Pneumatic Air Jack:
5.1. Lifting the Vehicle
- Umístění zvedáku: Roll the air jack under the vehicle, ensuring the thickened rubber pad is centered directly under a strong, load-bearing point of the vehicle's frame or designated jacking point.
- Close Red Valve: Ensure the red air release valve is fully closed.
- Open Green Valve: Slowly open the green air inlet valve to allow compressed air to enter the airbags. The jack will begin to inflate and lift the vehicle.
- Monitor Lifting: Continuously monitor the lifting process, ensuring the vehicle remains stable and the jack is not shifting.
- Dosažení požadované výšky: Once the vehicle reaches the desired height, close the green air inlet valve completely.
- Zajištění pomocí zvedáků: Immediately place appropriate jack stands under the vehicle's designated support points. Lower the vehicle onto the jack stands by slightly opening the red valve until the vehicle rests securely on the stands.
5.2. Spuštění vozidla
- Mírně zvedněte: If the vehicle is on jack stands, use the air jack to lift the vehicle slightly off the jack stands.
- Demontáž podpěr: Opatrně vyjměte zvedáky zpod vozidla.
- Open Red Valve: Slowly open the red air release valve to gradually deflate the airbags and lower the vehicle. Control the rate of descent by adjusting how much the valve is opened.
- Úplně dolů: Continue to lower the vehicle until it is fully on the ground.
- Odstraňte Jacka: Once the vehicle is fully lowered and stable, remove the air jack.
Image 5.1: A visual guide to the effortless operation of the VEVOR Air Jack, showing the three steps: 1. Close red valve, open green valve to inflate. 2. Turn off green valve when inflated. 3. Open red valve to bleed air and lower.
Image 5.2: A comparison showing the VEVOR Air Jack before inflation (compact) and after inflation (extended), illustrating the rapid lifting capability within 5 seconds.
Image 5.3: An illustration detailing the minimum height (6.3 inches / 16 cm) and maximum height (15.75 inches / 40 cm) of the VEVOR Air Jack, along with arrows indicating the lifting motion.
6. Údržba
Regular maintenance ensures the longevity and safe operation of your VEVOR Pneumatic Air Jack:
- Čištění: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage rubber components.
- Inspekce: Periodically inspect the airbags for cuts, punctures, or signs of wear. Check all connections, hoses, and valves for leaks or damage. Ensure the handle and wheels are securely attached and functioning correctly.
- Přívod vzduchu: Ensure your air compressor system includes a moisture trap to prevent water from entering the jack, which can cause internal corrosion.
- Skladování: Store the air jack in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully deflated before storage.
- Mazání: Lightly lubricate moving parts, such as wheel axles, if necessary, with a suitable lubricant.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zvedák nezvedá nebo zvedá pomalu | Nedostatečný tlak vzduchu Únik vzduchu Red valve not fully closed Přetížení | Check air compressor pressure (ensure it meets specifications) Inspect hoses and connections for leaks; tighten or replace Ensure red valve is completely closed Reduce load; do not exceed 5T capacity |
| Jack lowers unexpectedly | Únik vzduchu Red valve not fully closed Damaged airbag | Inspect for leaks; tighten connections Ensure red valve is completely closed Do not use; contact VEVOR support for replacement |
| Difficulty positioning the jack | Nerovný povrch Poškozená kola | Move vehicle to a firm, level surface Inspect wheels for damage; replace if necessary |
Pokud narazíte na problémy, které zde nejsou uvedeny, nebo pokud navrhovaná řešení problém nevyřeší, kontaktujte prosím zákaznickou podporu VEVOR.
8. Specifikace
Technical specifications for the VEVOR 5T Pneumatic Air Jack:
| Funkce | Specifikace |
|---|---|
| Značka | VEVOR |
| Model | Cric Pneumatico ad Aria |
| Zvedací kapacita | 5 tun (33 000 liber) |
| Minimální výška | 6.3 palce (160 mm) |
| Maximální výška | 15.75 palce (400 mm) |
| Zvedací čas | Approximately 3-5 seconds |
| Materiál | High-Strength Steel, Rubber Airbags |
| Provozní teplota | -60 ℃ ~ 50 ℃ |
| Rozměry produktu (D x Š x V) | 51.1 x 47 x 21.1 cm (přibližně 20.1 x 18.5 x 8.3 palce) |
| Kompatibilní typy vozidel | Automobile, Truck, SUV |
Image 8.1: A visual representation of the VEVOR Air Jack with key dimensions (height, width, length) and product weight, alongside examples of compatible vehicles.
9. Záruka a podpora
VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official VEVOR webmísto.
For technical assistance, troubleshooting, or to inquire about replacement parts, please contact VEVOR customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (Cric Pneumatico ad Aria) and ASIN (B08HLRYM7L) ready.