Uživatelská příručka k systému airbrush kompresoru Timbertech ABPST08K

1. Konec produktuview

The Timbertech ABPST08K is a complete airbrush compressor system designed for both beginners and advanced users. It features a powerful oil-free piston compressor with an air tank, an improved cooling fan, and an automatic stop function for efficient and quiet operation. The set includes a high-quality dual-action airbrush gun and essential accessories to get you started with various airbrushing applications.

1.1 Součásti balení

• ABPST08 Cooling Fan Compressor
• BD-130 Airbrush Nozzle (0.3 mm installed, with additional 0.20 mm and 0.50 mm nozzles)
• 1.8 meter Air Hose with 1/8" internal threads on both ends
• BD-H4 Mini Airbrush Holder
• 5 Test Acrylic Paints

Figure 1.1: Complete Timbertech ABPST08K Airbrush Compressor System with all included components.

2. Bezpečnostní pokyny

Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení:

• Před použitím jednotky si přečtěte všechny pokyny.
• Ujistěte se, že napájecí zdroj odpovídá objtage specified on the compressor (230 Volts).
• Kompresor provozujte v dobře větraném prostoru.
• Do not use the compressor near flammable liquids or gases.
• Always wear appropriate personal protective equipment (PPE), such as safety glasses and a respirator, when airbrushing.
• Nikdy nemiřte airbrushem na sebe ani na ostatní.
• Před prováděním jakékoli údržby nebo čištění odpojte napájecí kabel.
• Udržujte děti a domácí zvířata mimo provozní oblast.
• The compressor may become warm during extended use. Allow it to cool down before handling.

Figure 2.1: The compressor unit features an improved cooling fan for enhanced performance and safety.

3. Nastavení

3.1 Vybalení

1. Opatrně vyjměte všechny součásti z obalu.
2. Zkontrolujte všechny díly, zda během přepravy nebyly poškozeny. Pokud zjistíte jakékoli poškození, nepokračujte v instalaci a kontaktujte zákaznickou podporu.
3. Uschovejte si obal pro budoucí skladování nebo přepravu.

Figure 3.1: Components neatly packed in protective foam within the box.

3.2 Montáž

1. Place the compressor on a stable, level surface.
2. Attach the air hose to the air outlet on the compressor and to the airbrush gun. Ensure connections are secure to prevent air leaks.
3. If using the mini airbrush holder, attach it to a suitable surface or directly to the compressor if it has a mounting point.
4. Ensure the airbrush nozzle (0.3 mm) is correctly installed in the BD-130 airbrush gun.

Figure 3.2: The BD-130 airbrush gun and its accessories are provided in a protective case.

4. Návod k obsluze

4.1 Provoz kompresoru

1. Zapojte napájecí kabel do vhodné elektrické zásuvky (230 V).
2. Turn on the compressor using the power switch. The compressor will start to fill its 3-liter air tank.
3. The compressor features an automatic start/stop function: it will start at approximately 3 bar and stop at 4 bar.
4. Adjust the working pressure using the pressure regulator knob. The pressure gauge displays the current pressure. The actual working pressure in continuous operation ranges from 0.35 to 2.5 bar.
5. The integrated overheat protection device will automatically shut off the compressor if it becomes too hot. Allow it to cool down before restarting.

Figure 4.1: The pressure gauge and regulator allow precise control over air pressure.

4.2 Airbrush Operation (BD-130 Dual-Action Airbrush)

1. Prepare your paint: Ensure your paint is thinned to the appropriate consistency for airbrushing.
2. Fill the color cup: Pour the prepared paint into the 7 ml color cup of the airbrush.
3. Hold the airbrush: Hold the airbrush comfortably in your hand.
4. Activate air: Press down on the trigger to release air.
5. Activate paint: Pull back on the trigger to release paint. The further you pull back, the more paint will be released. This dual-action control allows for fine adjustments.
6. Practice on scrap material to get a feel for the airbrush's response before working on your final project.
7. The airbrush is suitable for nozzles from 0.2 mm to 1.0 mm, making it versatile for various applications like tattooing, nail art, cosmetics, and model making.

5. Údržba

5.1 Compressor Maintenance

• Vlhkost v odtoku: Regularly drain any accumulated moisture from the air tank. This is typically done via a drain plug at the bottom of the tank.
• Čistý vzduchový filtr: Check and clean the air filter periodically to ensure optimal airflow and prevent dust from entering the compressor.
• Skladování: When not in use, store the compressor in a clean, dry environment.

Figure 5.1: The drain plug located at the bottom of the air tank for moisture removal.

5.2 Airbrush Cleaning

Proper cleaning of the airbrush after each use is crucial for its longevity and performance.

1. Empty any remaining paint from the color cup.
2. Rinse the color cup with appropriate cleaning solution (water for acrylics, solvent for solvent-based paints).
3. Spray the cleaning solution through the airbrush until it sprays clear.
4. For thorough cleaning, disassemble the nozzle, needle, and other removable parts. Clean them with a brush and cleaning solution.
5. Reassemble the airbrush carefully, ensuring all parts are correctly aligned.

6. Řešení problémů

This section addresses common issues you might encounter with your airbrush compressor system.

7. Specifikace

8. Záruka a podpora

Information regarding specific warranty terms and customer support contact details for the Timbertech ABPST08K Airbrush Compressor System is not provided in the available product data. Please refer to the product packaging or the seller's webstránky s informacemi o záruce a kontakty na podporu.

Pro obecné dotazy nebo pomoc můžete také navštívit TIMBERTECH brand page on Amazon.