TIMBERTECH AS18-2 Airbrush Compressor User Manual

1. Úvod

Thank you for choosing the TIMBERTECH AS18-2 Airbrush Compressor. This compact and efficient compressor is designed for various applications including hobby painting, body art, cake decoration, model painting, automotive graphics, and makeup. It features a piston-type, oil-less design with auto start/stop functionality, ensuring stable and pulse-free air output. Please read this manual thoroughly before operation to ensure safe and optimal performance.

2. Důležité bezpečnostní pokyny

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

• Před použitím kompresoru si přečtěte všechny pokyny.
• Ujistěte se, že zdroj napájení odpovídá objtage specified on the compressor (110-120V/60Hz).
• Neprovozujte kompresor za mokra nebo damp podmínky.
• Udržujte děti a domácí zvířata mimo provozní oblast.
• Always unplug the compressor when not in use or before performing any maintenance.
• This compressor is designed for airbrush use only. Do not connect to spray guns or other high-demand air tools.
• Během provozu zajistěte dostatečné větrání.
• The compressor may become warm during extended use. This is normal.

3. Součásti a vlastnosti produktu

Familiarize yourself with the main components of your TIMBERTECH AS18-2 Airbrush Compressor.

Obrázek 3.1: Celkově view of the TIMBERTECH AS18-2 Airbrush Compressor, showing its compact design, handle, pressure gauge, and air filter.

Obrázek 3.2: Close-up of the pressure regulator knob. To adjust pressure, pull the knob up and rotate. The arrow indicates the direction for adjustment.

Obrázek 3.3: Illustration of the automatic stop function, showing auto start at 3 bar (43 PSI) and auto stop at 4 bar (58 PSI) for stable air pressure.

Obrázek 3.4: View of the suction pads for stability and the pressure gauge for real-time pressure display. Also shows the power switch for one-button start.

Obrázek 3.5: Diagram highlighting the efficient heat dissipation fin design and the water trap. An arrow indicates pressing up to drain water from the trap.

Klíčové vlastnosti:

• Piston Type & Oil-less: Maintenance-free operation.
• Auto Start/Stop: Automatically starts at 3 bar (43 PSI) and stops at 4 bar (58 PSI) for consistent pressure.
• Pressure Regulator with Gauge: Allows precise control and monitoring of air pressure.
• Water Trap: Filters moisture from the air, crucial for clean airbrushing.
• Nízká hlučnost: Operates at ≤ 50db.
• Přenosný design: Equipped with an easy-carry handle.
• Tepelně chráněno: Zabraňuje přehřátí.
• Přísavné nožičky: Zajišťuje stabilitu a snižuje vibrace.

4. Nastavení a uvedení do provozu

1. Rozbalení: Carefully remove the compressor from its packaging. Inspect for any damage.
   

   Obrázek 4.1: The compressor securely packed in its protective foam casing.

2. Umístění: Place the compressor on a stable, flat surface. The rubber feet will help secure it and reduce vibration. Ensure there is adequate space around the unit for ventilation.
3. Connect Airbrush Hose: Connect your airbrush hose to the 1/8 BSP connection on the compressor's air outlet. Ensure a secure, leak-free connection.
4. Připojení napájení: Plug the power cable into a grounded 110-120V/60Hz electrical outlet.
5. Počáteční zapnutí: Press the power switch to turn on the compressor. The compressor will run until it reaches its auto-stop pressure (4 bar / 58 PSI).
6. Seřízení tlaku: To adjust the working pressure, pull up the black knob on the pressure regulator and rotate it clockwise to increase pressure or counter-clockwise to decrease pressure. Push the knob down to lock the setting. Monitor the pressure gauge for the desired reading.

5. Návod k obsluze

Once set up, operating the TIMBERTECH AS18-2 is straightforward.

1. Prepare Airbrush: Fill your airbrush with the desired medium (paint, ink, etc.) and ensure it is clean and ready for use.
2. Activate Compressor: Turn on the compressor using the power switch. It will build pressure and then stop automatically.
3. Begin Airbrushing: When you press the trigger on your airbrush, the compressor will automatically start to supply air. When you release the trigger, the compressor will stop once the pressure reaches the auto-stop threshold. This auto start/stop feature conserves energy and reduces noise.
4. Monitorovací tlak: Regularly check the pressure gauge to ensure the desired working pressure is maintained. Adjust as needed using the regulator knob.
5. Nepřetržitý provoz: For continuous airflow, the compressor will run as long as air is being drawn. It is designed for continuous working.
6. Po použití: Turn off the compressor using the power switch. Disconnect the airbrush hose and clean your airbrush thoroughly.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho kompresoru.

• Drain Water Trap: The water trap collects moisture from the air. Periodically drain the accumulated water by pressing the button at the bottom of the water trap. Do not press this drain button when the machine is working or when the pressure cutoff stops.
  

  Obrázek 6.1: The water trap with an arrow indicating the drain button. Ensure the compressor is off and depressurized before draining.

• Čistý exteriér: Otřete vnější povrch kompresoru čisticím prostředkemamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Vzduchový filtr: The compressor has an air filter. Check it periodically and clean or replace if it appears dirty or clogged. Refer to the manufacturer's guidelines for filter maintenance.
• Skladování: Store the compressor in a clean, dry place when not in use.

7. Řešení problémů

This section addresses common issues you might encounter with your compressor.

8. Technické specifikace

9. Záruka a podpora

TIMBERTECH products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TIMBERTECH webwebu. Uschovejte si účtenku jako doklad o koupi.

Pro další pomoc můžete kontaktovat prodejce přímo prostřednictvím platformy, kde byl produkt zakoupen.