Modecom Oberon Pro Midi Tower Computer Case

1. Úvod

The Modecom Oberon Pro Midi Tower is a computer case designed for users seeking a functional and spacious interior with a modern aesthetic. This manual provides essential information for the proper installation, operation, and maintenance of your computer case, ensuring optimal performance and longevity of your components.

Obrázek 1: Přední a boční view of the Modecom Oberon Pro Midi Tower computer case.

2. Bezpečnostní informace

• Před instalací nebo demontáží jakýchkoli součástí vždy odpojte napájecí kabel ze zásuvky.
• Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
• Udržujte malé části a nástroje mimo dosah dětí.
• Zajistěte dostatečné větrání kolem skříně, abyste zabránili přehřátí.
• Do not attempt to modify the case structure, as this may void your warranty and pose safety risks.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny následující položky:

• Modecom Oberon Pro Midi Tower Computer Case
• Accessory box (screws, standoffs, cable ties)
• Uživatelská příručka (tento dokument)

4. Klíčové vlastnosti

• Prostorný interiér: Designed to accommodate high-end components and facilitate good airflow.
• Efektivní chlazení: Includes two pre-mounted 120mm fans (front and rear) to prevent component overheating.
• Instalace bez nářadí: Supports tool-free mounting for SSD/HDD drives and expansion cards.
• Filtrace prachu: Features easily dismountable magnetic filters on the top, front, and bottom (under the power supply unit) to keep the interior clean.
• Optimized Cable Management: Provides a system for convenient wiring organization.
• Long PSU Tunnel: Offers a 240mm space for power supplies, simplifying installation and cable arrangement.

5. Nastavení a instalace

5.1. Příprava případu

Before installation, remove the side panels of the case. The Oberon Pro features sound-dampening mats on the side panels to reduce noise.

Obrázek 2: Interiér view showing sound-dampening mats on the side panel.

5.2. Instalace základní desky

Install the necessary standoffs for your motherboard form factor (ATX, Micro ATX, ITX). Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws.

Figure 3: Interior layout with pre-installed rear fan and motherboard tray.

5.3. Drive Installation (SSD/HDD)

The Oberon Pro supports tool-free installation for three 2.5" SSDs and two 3.5" HDDs. The 3.5" HDD bays are located in the power supply tunnel at the bottom of the case. 2.5" SSDs can be mounted on both sides of the motherboard tray.

Figure 4: Dedicated bays for HDD and SSD storage devices.

5.4. Instalace napájecího zdroje

The case features a long PSU tunnel (240mm) at the bottom. Install your power supply unit into this tunnel and secure it. This design aids in cable management and airflow.

5.5. Expansion Card Installation (PCI/PCIe)

Install your graphics card or other expansion cards into the PCI/PCIe slots. The case supports tool-free mounting for these cards, allowing for easy installation and removal.

Obrázek 5: Zadní interiér view highlighting the expansion card slots.

5.6. Správa kabelů

Utilize the provided cable routing options and tie-down points behind the motherboard tray to organize cables. This improves airflow and maintains a tidy interior.

6. Chladicí systém

The Oberon Pro comes with two pre-installed 120mm fans, one at the front and one at the rear, to ensure adequate airflow. The maximum height for a CPU cooler is 163mm, and the maximum length for a video card is 395mm, allowing for compatibility with a wide range of components.

7. Údržba

To maintain optimal performance and prevent dust buildup, regularly clean the dust filters. The magnetic filters on the top, front, and bottom of the case are easily dismountable for cleaning. Use compressed air or a soft brush to remove accumulated dust.

8. Řešení problémů

• Bez napájení: Ensure all power cables are securely connected to the motherboard, power supply, and wall outlet. Check the power button connection to the motherboard.
• Přehřívání: Verify that all fans are spinning correctly and that dust filters are clean. Ensure proper cable management to avoid obstructing airflow.
• Porty na předním panelu nefungují: Check that the front panel connectors (USB, audio) are correctly plugged into the motherboard headers.

Figure 6: Front panel I/O ports for connectivity.

9. Specifikace

Figure 7: Rear exterior view of the computer case.

10. Záruka a podpora

For warranty information and technical support, please refer to the official Modecom webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případné reklamace.