Kulannder 5D Diamond Painting LED Magnifier Lamp Návod k použití

1. Konec produktuview

The Kulannder 5D Diamond Painting LED Magnifier Lamp is designed to assist with detailed tasks such as diamond painting, cross-stitch, needlework, reading, and small repairs. It features a main lens with 4X magnification and a smaller inset lens with 6X magnification, complemented by three integrated LED lights for enhanced illumination. The flexible gooseneck and strong clip allow for versatile positioning and secure attachment to various surfaces.

Image 1.1: Kulannder LED Magnifier Lamp, illustrating its flexible design and clip for attachment.

2. Obsah balení

• 1 x LED Light Magnifier with Clip
• 1 x hadřík na čištění čoček

3. Specifikace produktu

4. Pokyny k nastavení

Follow these steps to set up your Kulannder LED Magnifier Lamp:

1. Rozbalte komponenty: Carefully remove the magnifying glass head and the gooseneck with the attached clamp z obalu.
2. Connect Head to Gooseneck: Securely connect the magnifying glass head to the top of the gooseneck. Ensure it clicks into place or is firmly screwed on, depending on the model.
3. Nainstalujte baterie: Locate the battery compartment on the magnifying glass head. Open it and insert three (3) AAA batteries (not included), ensuring correct polarity. Close the compartment securely.
4. Připojit k povrchu: Use the strong clamp to attach the lamp to a stable surface such as a desk, table, or workbench. Ensure the clamp is firmly secured to prevent accidental dislodgement.

Image 4.1: Visual guide for connecting the magnifier head, installing batteries, and clamping the unit to a surface.

5. Návod k obsluze

Operating your LED Magnifier Lamp je přímočaré:

1. Zapnutí/vypnutí: Locate the ON/OFF switch on the side of the magnifying glass head. Slide the switch to the "ON" position to turn on the LED lights. Slide it to "OFF" to turn them off.
2. Upravit pozici: The flexible gooseneck allows for 360-degree adjustment. Bend and position the gooseneck to direct the magnifier and light precisely over your work area. The gooseneck is designed to hold its position without collapsing.
3. Utilize Magnification: Use the large 4X lens for general magnification. For finer details, utilize the smaller 6X inset lens.

Image 5.1: The flexible gooseneck allows for precise positioning of the magnifier and light.

Image 5.2: The magnifier features both 4X and 6X lenses for varying levels of detail.

6. Údržba

To ensure the longevity and optimal performance of your magnifier lamp:

• Čištění objektivu: Use the provided lens cleaning cloth to gently wipe the magnifier lenses. Avoid using abrasive materials or harsh chemical cleaners, as these can scratch or damage the acrylic lens.
• Výměna baterie: When the LED lights dim or stop working, replace all three AAA batteries with new ones. Ensure correct polarity during installation.
• Skladování: Když se nepoužívá, uložte lamp na čistém a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Image 6.1: Use the included lens cloth for gentle cleaning of the magnifier lens.

7. Řešení problémů

• Světla se nerozsvítí:
  • Check if the ON/OFF switch is in the "ON" position.
  • Ujistěte se, že jsou baterie vloženy správně se správnou polaritou.
  • Vyměňte staré baterie za nové.
• Lights Flickering:
  • To často signalizuje nízký stav baterie. Vyměňte baterie.
  • Ensure battery compartment connections are clean and secure.
• Magnifier Not Holding Position:
  • Ujistěte se, že třamp is securely fastened to a stable surface.
  • Adjust the gooseneck carefully to find a stable position.

8. Záruka a podpora

The Kulannder LED Magnifier Lamp comes with a one-year warranty. If you encounter any quality issues or require assistance, please contact Kulannder customer support. Refer to the product packaging or the retailer's webweb pro konkrétní kontaktní informace.