Fengda Mini Airbrush Compressor FD-18-2 User Manual

1. Úvod

Thank you for choosing the Fengda Mini Airbrush Compressor FD-18-2. This oil-free piston compressor is designed for various applications, including airbrushing, cosmetics, nail art, tattoos, hobbies, and home use. Its compact size and low noise level make it suitable for both professional and personal environments. Please read this manual thoroughly before operation to ensure safe and efficient use.

2. Bezpečnostní pokyny

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Vždy se ujistěte, že zdroj napájení odpovídá hlasitostitage specified on the compressor (220-240V / 50Hz).
• Do not operate the compressor in wet conditions or near flammable liquids or gases.
• Udržujte děti a neoprávněné osoby mimo provozní prostor.
• Před prováděním jakékoli údržby nebo čištění vždy odpojte napájecí kabel ze zásuvky.
• Do not modify the compressor or its components. Use only original replacement parts.
• Ensure adequate ventilation during operation to prevent overheating. The compressor has thermal protection, but proper airflow is crucial.
• Nikdy nesměrujte proud vzduchu na lidi ani zvířata.
• Wear appropriate personal protective equipment, such as eye protection, when operating the airbrush system.
• The compressor is designed for intermittent use. Avoid continuous operation for extended periods to prevent overheating.

3. Konec produktuview

The Fengda FD-18-2 is a compact, oil-free piston compressor featuring a pressure regulator, filter, and manometer for precise control and clean air delivery. It is designed for quiet operation and portability.

3.1 Součásti zahrnuté v balení

• 1 x Fengda FD-18-2 Mini Airbrush Compressor (without air tank)
• 1 x Output Pressure Regulator with Filter and Manometer
• 1 x napájecí kabel
• 1 x Uživatelská příručka

3.2 Klíčové vlastnosti

• Oil-free piston design ensures clean air without oil contamination.
• Integrated pressure regulator with filter and manometer for precise pressure adjustment and moisture separation.
• Automatic start at 3 bar (43.5 PSI) and automatic stop at 4 bar (58 PSI) for efficient operation.
• Thermal protection against overload or overheating.
• Low noise level (47 dB) for comfortable use in various environments.
• Portable and lightweight design with rubber feet for stability.
• Suitable for airbrushes with nozzle sizes from 0.2 mm to 1.0 mm.
• Ideal for model painting, body painting, nail art, fine arts, car painting, touch-ups, cake decorating, textile and t-shirt painting, or other painting applications.

Obrázek 1: Přesview of the Fengda FD-18-2 Mini Airbrush Compressor, showing the main unit, pressure regulator, filter, and power cable.

4. Nastavení a instalace

1. Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda během přepravy nedošlo k poškození.
2. Umístění: Place the compressor on a stable, flat surface. Ensure the rubber feet are securely positioned to minimize vibration. Allow sufficient space around the unit for proper ventilation.
3. Připojení regulátoru: The pressure regulator with filter and manometer typically comes pre-attached or needs to be screwed onto the air outlet port of the compressor. Ensure it is hand-tightened securely to prevent air leaks.
4. Connect Airbrush Hose: Connect your airbrush hose to the G 1/8" air outlet thread on the pressure regulator. Ensure a tight connection.
5. Připojení napájení: Plug the power cable into a suitable grounded electrical outlet (220-240V / 50Hz).

Obrázek 2: Detailní view of the pressure regulator, filter, and manometer, essential for controlling air pressure and ensuring clean air.

5. Provoz

1. Zapnutí: Flip the power switch to the "ON" position. The compressor will start and build pressure until it reaches approximately 4 bar (58 PSI), then it will automatically shut off.
2. Upravte tlak: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure, counter-clockwise to decrease. The manometer will display the current output pressure.
3. Begin Airbrushing: Once the desired pressure is set, you can begin using your airbrush. The compressor will automatically restart when the pressure drops to approximately 3 bar (43.5 PSI) and stop again when it reaches 4 bar (58 PSI).
4. Lapač vlhkosti: The integrated filter acts as a moisture trap. Periodically check the transparent bowl for accumulated moisture.
5. Vypnout: When finished, turn off the compressor using the power switch and disconnect it from the power outlet.

Obrázek 3: Detail view of the manometer, indicating the adjustable air pressure output.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho kompresoru.

• Drain Moisture Trap: Regularly check and drain any accumulated moisture from the filter/moisture trap. This prevents water from reaching your airbrush and paint. To drain, unscrew the small valve at the bottom of the transparent bowl.
• Čistý exteriér: Otřete vnější povrch kompresoru čisticím prostředkemamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Vzduchový filtr: The compressor has an internal air filter. While not user-serviceable in the same way as the moisture trap, ensure the air intake vents are clear of dust and debris.
• Skladování: When not in use, store the compressor in a clean, dry, and dust-free environment.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Fenghua Bida Machinery Manufacture CO., LTD