1. Úvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Fengda FD-186 Professional Airbrush Compressor. Please read this manual thoroughly before using the compressor and retain it for future reference.
The Fengda FD-186 is a compact, oil-free mini compressor designed for precision airbrushing. It features a 3-liter air tank, a pressure regulator with a filter and manometer, and an automatic start/stop function for consistent air pressure. Its quiet operation and portability make it ideal for various applications, including airbrushing, cosmetic studios, nail art, tattooing, and hobby use. This compressor is compatible with airbrushes featuring nozzles from 0.2mm to 1mm.
Obrázek 1.1: Plný view of the Fengda FD-186 Professional Airbrush Compressor.
2. Bezpečnostní pokyny
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.
- Elektrická bezpečnost: Ensure the compressor is connected to a properly grounded outlet with the correct voltage (220-240V / 50Hz). Do not operate with damaged cords or plugs. Keep the power cord away from heat, oil, and sharp edges.
- Bezpečnost při tlaku: Never exceed the maximum operating pressure of 4 bars (57 PSI). Do not tamper with the safety/drain valve. Always release air pressure from the tank before disconnecting hoses or performing maintenance.
- Větrání: Operate the compressor in a well-ventilated area to prevent overheating. Do not block air vents.
- Osobní ochrana: Wear appropriate personal protective equipment, such as safety glasses, when operating the airbrush system.
- Děti a domácí mazlíčci: Během provozu držte děti a domácí zvířata mimo dosah kompresoru.
- Skladování: Store the compressor in a dry, clean, and secure location when not in use.
- Zamýšlené použití: Use the compressor only for its intended purpose of airbrushing and related applications as described in this manual.
3. Konec produktuview a Komponenty
The Fengda FD-186 compressor is designed for ease of use and reliable performance. Key components include:
- Kompresorová jednotka: The main motor and pump assembly.
- Vzduchová nádrž (3 litrů): Stores compressed air to ensure a consistent, pulse-free airflow.
- Regulátor tlaku: Umožňuje nastavení výstupního tlaku vzduchu.
- Manometer (Pressure Gauge): Zobrazuje aktuální tlak vzduchu.
- Vzduchový filtr: Removes moisture and particles from the air, preventing contamination of your work.
- Safety/Drain Valve: Pro uvolněníasing pressure and draining condensed moisture from the air tank.
- Vypínač: To turn the compressor on and off.
- Rukojeť pro přenášení: Pro snadnou přenositelnost.
3.1 Klíčové vlastnosti
- Powerful and constant working pressure.
- Very quiet operation (47 dB).
- Oil-free design, requiring minimal maintenance.
- Portable due to its low weight.
- Automatic start at 3 BAR (43 PSI) and automatic stop at 4 BAR (57 PSI).
- 3-liter pressure vessel ensures balanced air output.
- Equipped with a safety/drain valve.
- Automatic overheat protection for enhanced safety and durability.
Image 3.1: Close-up of the pressure gauge and regulator with air filter.
Image 3.2: Detail of the power switch.
Image 3.3: Detail of the air tank drain valve.
Obrázek 3.4: Nahoře view of the compressor head.
4. Nastavení
- Rozbalení: Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit.
- Umístění: Kompresor umístěte na stabilní, rovný povrch v dobře větraném prostoru. Zajistěte dostatek prostoru kolem jednotky pro cirkulaci vzduchu.
- Connect Airbrush Hose: Connect your airbrush hose to the G 1/8 air connection port on the pressure regulator. Ensure the connection is secure to prevent air leaks.
- Připojte napájení: Plug the power cable into a grounded 220-240V / 50Hz electrical outlet.
- Počáteční kontrola: Before first use, ensure all connections are tight and the drain valve on the air tank is closed.
5. Návod k obsluze
- Zapnutí: Flip the power switch to the "ON" position. The compressor will start to fill the air tank.
- Automatický provoz: The compressor will automatically stop once the pressure in the 3-liter air tank reaches 4 BAR (57 PSI). It will then automatically restart when the pressure drops to 3 BAR (43 PSI) during use. This ensures a consistent air supply without constant motor operation.
- Seřízení tlaku: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure and counter-clockwise to decrease it. Monitor the manometer to set the precise pressure required for your airbrushing task.
- Airbrush Use: Once the desired pressure is set, you can begin using your airbrush. The air filter will ensure clean, dry air is delivered to your airbrush.
- Vypnout: After use, turn off the compressor by flipping the power switch to the "OFF" position.
- Uvolněte zbytkový tlak: It is recommended to release any residual air pressure from the tank by opening the drain valve or briefly activating your airbrush until the manometer reads zero.
5.1 Video s ukázkou produktu
Video 5.1: Stručný přehledview and demonstration of the Fengda FD-186 Airbrush Compressor.
Video 5.2: Demonstration of the Wiltec AF186 compressor, which shares similar operational principles with the Fengda FD-186.
6. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho kompresoru.
- Vypouštěcí vzduchová nádrž: After each use, or at least daily, open the drain valve at the bottom of the air tank to release any accumulated moisture. This prevents rust and extends the tank's life.
- Čistý vzduchový filtr: Periodically check the air filter on the pressure regulator. If it appears dirty, clean or replace it according to the manufacturer's recommendations to ensure clean air delivery.
- Generální úklid: Otřete vnější povrch kompresoru čisticím prostředkemamp hadříkem odstraňte prach a nečistoty. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
- Zkontrolujte připojení: Regularly inspect all air connections and hoses for leaks or damage. Tighten any loose connections.
- Ochrana proti přehřátí: The compressor has automatic overheat protection. If it shuts down due to overheating, allow it to cool down completely before restarting. Ensure proper ventilation.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Kompresor se nespustí. | No power, power switch off, thermal overload. | Check power connection and outlet. Ensure power switch is ON. Allow compressor to cool down if it overheated. |
| No air output or low pressure. | Air tank empty, pressure regulator set too low, air leaks, clogged air filter. | Allow tank to fill. Adjust pressure regulator. Check all connections for leaks. Clean or replace air filter. |
| Inconsistent air pressure (pulsation). | Air tank not fully pressurized, regulator malfunction. | Ensure air tank is allowed to fill completely. If problem persists, contact support. |
| Kompresor se přehřívá a vypíná. | Prolonged use, poor ventilation. | Allow the unit to cool down. Ensure adequate ventilation around the compressor. Avoid continuous operation for extended periods. |
| Excessive moisture in air output. | Air tank not drained, clogged air filter. | Regularly drain the air tank. Clean or replace the air filter. |
8. Specifikace
| Specifikace | Hodnota |
|---|---|
| Značka | Fengda |
| Název modelu | FD-186 |
| Číslo modelu | AS-186 |
| svtage | 220-240 V / 50 Hz |
| Moc | 0.123 kW (1/6 hp) |
| Rychlost | 1450/1700 ot./min |
| Úroveň hluku | 47 dB / 1m |
| Proudění vzduchu | 20-23 l/min (21.5 L/min) |
| Připojení vzduchu | G 1/8 |
| Délka kabelu | 1.9 m |
| Certifikace | CE, GS, ETL, CETL, ROHS |
| Nastavitelný tlak | 0 bar to 4 bars |
| Automatic Start Pressure | 3 BAR (43 PSI) |
| Automatic Stop Pressure | 4 BAR (57 PSI) |
| Pressure Regulator Range | 0 – 10 Bars (0-100 PSI) |
| Kapacita vzduchové nádrže | 3 litrů |
| Rozměry (D x Š x V) | 33L x 15W x 34H cm |
| Hmotnost | 11.02 libry (přibližně 5 kg) |
| Materiál | Kov |
| Doporučené použití | Airbrushing |
Image 8.1: Dimensions of the Fengda FD-186 Airbrush Compressor.
9. Záruka a podpora
Specific warranty information was not provided in the product details. Please refer to your purchase documentation or contact your retailer for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact Fengda customer service or your authorized dealer.