Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Konec produktuview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Klíčové vlastnosti:

• Energetická účinnost: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Dlouhá životnost: Rated for 36,000 hours (based on 3 hours/day usage).
• Všestranná montáž: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Měkké bílé světlo: Provides a comfortable ambiance for general room lighting.
• Stmívatelné: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Nastavení a instalace

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Kroky instalace:

1. Bezpečnost především: Před zahájením se ujistěte, že je v místě instalace vypnuto napájení jističem.
2. Připravte montážní povrch: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Připojení kabeláže: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Montážní přípravek: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Obnovit napájení: Jakmile je svítidlo bezpečně namontováno a zapojeno, obnovte napájení jističem.
6. Test funkčnosti: Zapněte spínač světla, abyste ověřili jeho správnou funkci.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Návod k obsluze

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Teplota barvy světla:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Funkce stmívání:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Údržba

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Čištění:

• Před čištěním se ujistěte, že je svítidlo vypnuto jističem.
• Otřete vnější povrch svítidla měkkým hadříkemamp tkanina.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Před obnovením napájení se ujistěte, že je svítidlo zcela suché.

Odstraňování problémů

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Světlo se nerozsvítí:
  • Zkontrolujte jistič, abyste se ujistili, že je do svítidla přivedeno napájení.
  • Verify that the light switch is in the "on" position.
  • Zkontrolujte, zda nejsou kabelové spoje uvolněné nebo poškozené (před kontrolou se ujistěte, že je vypnuté napájení).
• Blikání světla:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Zkontrolujte, zda nejsou uvolněné kabelové spoje.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 voltů).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Specifikace

Informace o záruce

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 let na díly a práci od data nákupu. Uschovejte si prosím doklad o koupi pro případné reklamace.

For warranty service or questions, please contact Philips customer support.

Zákaznická podpora

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webstránky s kontaktními údaji a zdroji podpory.

Výrobce: Osvětlení Philips

Značka: Philips