Coaster Fine Furniture 204691F

Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame - Model 204691F Instruction Manual

Your guide to assembly, care, and maintenance.

1. Úvod

Thank you for choosing the Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame, Model 204691F. This traditional wood bed frame features a 47-inch headboard and a matching footboard, both with elegant sleigh curves and a crisp white finish. This manual provides detailed instructions for safe assembly, proper care, and maintenance to ensure the longevity and enjoyment of your new bed frame.

Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame in white

Image 1.1: The assembled Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame in a white finish.

2. Bezpečnostní informace

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product.

  • Keep all hardware and packaging materials out of reach of children.
  • Assemble the product on a soft, non-abrasive surface (e.g., carpet or cardboard) to prevent scratches.
  • Před použitím se ujistěte, že jsou všechna spojení bezpečně utažena. Pravidelně kontrolujte a v případě potřeby dotahujte spojovací materiál.
  • Do not use power tools for assembly unless specifically instructed, as this may overtighten or damage components.
  • This product is designed for use with a full-size mattress. Ensure your mattress fits properly within the frame.
  • Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o nichž je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce.

3. Obsah balení

Před montáží ověřte, zda jsou všechny níže uvedené komponenty přítomny a nepoškozené. Pokud některé komponenty chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • Čelo postele (1)
  • stupačka (1)
  • Boční kolejnice (2)
  • Slats (Set of multiple wooden slats)
  • Support Legs for Slats (Multiple)
  • Sada hardwaru (šrouby, podložky, matice, imbusový klíč)
Components of the Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame, showing headboard, footboard, side rails, and slats

Obrázek 3.1: Konecview of the bed frame components, including the headboard, footboard, and side rails.

4. Montážní návod

Montáž obvykle vyžaduje dva dospělé. Prosím, pečlivě dodržujte tyto kroky.

Krok 1: Připevnění bočnic k čelu postele

  1. Position the headboard upright.
  2. Align one side rail with the pre-drilled holes on the headboard's side.
  3. Insert bolts through the holes and secure with washers and nuts. Do not fully tighten yet.
  4. Repeat for the other side rail on the opposite side of the headboard.
Close-up of the headboard and side rail connection points during assembly

Image 4.1: Detail of the headboard and side rail connection, showing the attachment mechanism.

Step 2: Attach Side Rails to Footboard

  1. Position the footboard upright.
  2. Connect the free ends of the side rails to the footboard, aligning holes.
  3. Insert bolts and secure with washers and nuts.
  4. Once all four connections are made, fully tighten all bolts using the provided Allen wrench.
The bed frame assembled without slats, showing the headboard, footboard, and side rails connected

Image 4.2: The bed frame structure after connecting the headboard, footboard, and side rails.

Krok 3: Instalace lamel a podpěrných nohou

  1. Place the wooden slats across the side rails, ensuring they are evenly spaced.
  2. Attach the support legs to the center of the slats, if applicable, and ensure they are firmly on the ground.
  3. Secure the slats to the side rails using screws, if provided, to prevent shifting.
Diagram showing the dimensions and internal structure of the bed frame, including slat placement and support legs

Image 4.3: A diagram illustrating the bed frame's dimensions and the placement of slats and central support legs.

Your Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame is now assembled. Place your full-size mattress directly on the slats. A box spring is not typically required with this slat system, but can be used for additional height or support if desired.

5. Péče a údržba

Proper care will help maintain the appearance and extend the life of your bed frame.

  • Čištění: Vyčistěte pomocí reklamyamp cloth. Avoid using strong chemicals, abrasive cleaners, or polishes that may damage the finish.
  • Utírat prach: Pravidelně otírejte prach měkkým, suchým hadříkem.
  • Rozlití: Rozlité tekutiny ihned setřete čistým hadříkem.amp tkanina.
  • Železářské zboží: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
  • sluneční světlo: Vyhněte se delšímu vystavení přímému slunečnímu záření, které může způsobit vyblednutí nebo změnu barvy.
  • Teplo a vlhkost: Keep the bed frame away from direct heat sources and areas of high humidity.

6. Řešení problémů

ProblémMožná příčinaŘešení
Rám postele je vratký nebo nestabilní.Volné hardwarové připojení.Ensure all bolts and screws are fully tightened. Check periodically and re-tighten as needed.
Vrzavé zvuky.Volné spoje nebo tření mezi součástmi.Utáhněte všechny spojovací prvky. Pokud vrzání přetrvává, naneste malé množství parafínu nebo silikonového spreje na kontaktní body mezi dřevěnými komponenty.
Mattress sags or falls through slats.Slats are not properly secured or are damaged. Insufficient support for mattress type.Ensure all slats are correctly positioned and secured. Verify that central support legs are installed and making firm contact with the floor. Consider adding a plywood sheet over the slats for additional support if not using a box spring.

7. Specifikace

  • Číslo modelu: 204691F
  • Značka: Podložka jemný nábytek
  • Velikost: Plný
  • Barva: Bílý
  • Typ dokončení: Bílý
  • Rozměry produktu (celkové): 87 cm D x 56.25 cm Š x 47 cm V
  • Výška čela postele: 47"
  • Výška stupačky: 35" (approximate, based on visual)
  • Hmotnost položky: Přibližně 93 libry
  • Požadovaná montáž: Ano
  • Kompatibilní velikost matrace: Plný
  • Speciální funkce: Sleigh Bed design

8. Záruka a podpora

Coaster Fine Furniture products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture webmísto.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Coaster Fine Furniture customer support:

  • Webmísto: www.coasterfurniture.com (for general information and support)
  • Služby zákazníkům: Refer to your purchase documentation for direct contact numbers or email.

9. Produktová videa

The following videos provide additional information about the product.

Coaster Fine Furniture Brand Overview

Video 9.1: Overview of the Coaster Fine Furniture brand, showcasing their commitment to quality and design. This video provides context about the manufacturer.

Product Review: Coaster Louis Philippe Sleigh Bed

Video 9.2: A brief review of the Coaster Louis Philippe Sleigh Bed, highlighting its features and design. This video offers a visual perspective of the assembled product in a room setting.

© 2023 Coaster Fine Furniture. All rights reserved. Model 204691F.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.