Tchibo B00LXY3NEW
TCM Tchibo Digital Radio Clock with Motion Sensor, LCD, and Crescendo Alarm
Model: B00LXY3NEW
Zavedení
Thank you for choosing the Tchibo Digital Radio Clock. This device combines a precise digital clock with a radio function and a convenient motion sensor for display illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.
Bezpečnostní pokyny
- Před použitím si pečlivě přečtěte všechny pokyny a uschovejte si je pro budoucí použití.
- Nevystavujte zařízení vodě, vysoké vlhkosti ani extrémním teplotám.
- Používejte pouze uvedený typ baterií. Při vkládání baterií dbejte na správnou polaritu.
- Nepokoušejte se zařízení rozebírat ani opravovat sami. Kontaktujte kvalifikovaný servisní personál.
- Uchovávejte mimo dosah dětí.
- Baterie zlikvidujte zodpovědně v souladu s místními předpisy.
Obsah balení
Zkontrolujte prosím, zda jsou v balení přítomny všechny položky:
- Tchibo Digital Radio Clock (1 unit)
- Návod k použití (tento dokument)
- Poznámka: Baterie nejsou součástí balení a je nutné je zakoupit samostatně.
Konec produktuview
Familiarize yourself with the main components of your radio clock:

Obrázek 1: Přední view of the Tchibo Digital Radio Clock. The image displays the rectangular anthracite-colored clock with a clear LCD screen in the center. Below the screen, several control buttons are visible, likely for setting time, alarm, and radio functions. The overall design is modern and compact, suitable for a bedside table.
- LCD displej: Zobrazuje čas, stav budíku a rádiovou frekvenci.
- Pohybový senzor: Activates display backlight when motion is detected nearby.
- Ovládací tlačítka: (e.g., SET, ALARM, MODE, TUNING, SNOOZE) - Specific button functions will be detailed in the "Operating" section.
- Přihrádka na baterie: Located on the back or bottom of the unit.
Nastavení
1. Powering On (Battery Installation)
- Locate the battery compartment cover on the back or bottom of the clock.
- Otevřete kryt.
- Insert the required batteries (e.g., 2x AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
- The display should now light up, and the clock will attempt to synchronize the time automatically.
2. Počáteční synchronizace času
Your radio clock is designed to automatically synchronize with a radio time signal. This process may take a few minutes, especially during the first setup or after battery replacement. Ensure the clock is placed near a window or in an area with good reception.
- During synchronization, an icon (e.g., an antenna symbol) may flash on the display.
- Once synchronized, the icon will become solid, and the correct time will be displayed.
3. Manual Time Setting (If Automatic Fails)
If the clock fails to synchronize automatically or if you wish to set the time manually:
- Stiskněte a podržte SOUBOR tlačítko po dobu přibližně 3 sekund, dokud nezačnou blikat číslice hodin.
- Použijte UP or DOLŮ buttons (or similar, depending on model) to adjust the hour.
- Stiskněte SOUBOR again to confirm the hour and move to the minute setting.
- Upravte minuty pomocí UP or DOLŮ tlačítka.
- Stiskněte SOUBOR pro potvrzení a ukončení režimu nastavení času.
4. Nastavení alarmu
Your clock features a Crescendo alarm, which gradually increases in volume.
- Stiskněte a podržte POPLACH button for approximately 3 seconds until the alarm hour digits flash.
- Použijte UP or DOLŮ tlačítky nastavte požadovanou hodinu buzení.
- Stiskněte POPLACH again to confirm the hour and move to the minute setting.
- Adjust the alarm minutes using the UP or DOLŮ tlačítka.
- Stiskněte POPLACH pro potvrzení a ukončení režimu nastavení budíku.
- Pro aktivaci/deaktivaci budíku krátce stiskněte POPLACH tlačítko. Na displeji se zobrazí/zmizí ikona alarmu.
5. Radio Tuning
(Note: While the product is a "radio clock", specific radio tuning details are not provided. This section assumes basic functionality.)
- Stiskněte tlačítko RÁDIO or MODE button to switch to radio mode.
- Použijte LADĚNÍ or NAHORU/DOLŮ tlačítky pro ruční naladění požadované stanice.
- Some models may have an auto-scan function; press and hold the LADĚNÍ tlačítko pro jeho aktivaci.
Provozní
1. Funkce displeje
- LCD displej: The main display shows the current time, and when active, the alarm time or radio frequency.
- Motion Sensor Backlight: The display is designed to be dim in normal conditions to avoid disturbing sleep. To illuminate the display, wave your hand over the top of the clock or activate the motion sensor area. The backlight will activate for a few seconds.
2. Funkce alarmu
- Crescendo Alarm: When the alarm sounds, its volume will gradually increase over a short period to gently wake you up.
- Funkce odložení: Když zazní alarm, stiskněte PODŘIMOVAT button (usually a large button on top). The alarm will pause for a set period (e.g., 5-10 minutes) and then sound again.
- Zastavení alarmu: To turn off the alarm for the day, press any other button (e.g., POPLACH, SOUBOR) while it is sounding. The alarm will reset for the next day if it is still activated.
3. Funkce rádia
- Switching to Radio: Stiskněte tlačítko RÁDIO or MODE tlačítko pro poslech rádia.
- Ovládání hlasitosti: Používejte vyhrazené OBJEM +/- tlačítka nebo NAHORU/DOLŮ buttons in radio mode to adjust the sound level.
- Switching Off Radio: Stiskněte tlačítko VYPNUTO or MODE button again to return to clock display or turn off the radio.
Údržba
1. Čištění
- Otřete hodiny měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and electronic components.
- Zajistěte, aby se do zařízení nedostala žádná kapalina.
2. Výměna baterie
- When the display becomes dim or functions become erratic, it's time to replace the batteries.
- Follow the "Powering On (Battery Installation)" steps in the Setup section to replace old batteries with new ones.
- Použité baterie zlikvidujte v souladu s místními předpisy na ochranu životního prostředí.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo tmavý. | Low or dead batteries; motion sensor not activated. | Replace batteries. Wave hand over the motion sensor area to activate backlight. |
| Čas je nesprávný nebo se nesynchronizuje. | Poor radio signal; interference; initial synchronization failed. | Move the clock to a location with better reception (e.g., near a window). Perform manual time setting. |
| Alarm se nespustí. | Budík není aktivován; hlasitost budíku je příliš nízká. | Ensure the alarm icon is visible on the display. Check alarm settings and volume. |
| Příjem rádia je špatný. | Slabý signál; rušení. | Adjust the clock's position. Extend any built-in antenna if available. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Tchibo |
| Model | B00LXY3NEW |
| Barva | Antracit |
| Typ zobrazení | Digitální LCD |
| Styl | Moderní |
| Speciální funkce | Alarm, Radio, Motion Sensor, Crescendo Alarm |
| Zdroj napájení | Napájení z baterie |
| Tvar | Obdélníkový |
| Materiál rámu | Akrylonitrilbutadienstyren (ABS) |
| Baterie jsou součástí dodávky | Žádný |
| Typ montáže | Stolní deska |
| Typ pohybu | Křemen |
Záruka a podpora
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.
For technical support or service inquiries, please contact the retailer where you purchased the product or visit the official Tchibo webstránky s informacemi o zákaznickém servisu.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.