TecTake 401163 TV Wall Mount Instruction Manual

1. Úvod

Thank you for choosing the TecTake 401163 Tilting TV Wall Mount. This manual provides essential information for the safe and correct installation and use of your new wall mount. Please read these instructions carefully before beginning installation and retain them for future reference.

2. Bezpečnostní informace

• Ensure the wall structure can safely support the combined weight of the mount and the display. Consult a professional if unsure.
• Nepřekračujte maximální nosnost 100 kg (220 lb).
• Always use appropriate safety gear, including eye protection, during installation.
• Během instalace držte děti a domácí zvířata mimo pracovní prostor.
• Verify that no electrical wires or plumbing are present in the drilling area.
• Tighten all screws firmly but do not overtighten to avoid stripping threads or damaging components.
• Tento výrobek je určen pouze pro vnitřní použití.

3. Obsah balení

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact TecTake customer support.

• TecTake 401163 TV Wall Mount (pre-assembled)
• Complete Mounting Hardware Kit (screws, anchors, washers, spirit level)
• Detailed and Illustrated Assembly Instructions (this manual)

Figure 3.1: Included Mounting Hardware

4. Specifikace

Figure 4.1: Technical Dimensions

5. Nastavení a instalace

Follow these steps for a secure installation. It is recommended to have two people for installation, especially when mounting the display.

1. Připravte televizor: Attach the pre-assembled mount brackets to the back of your television using the appropriate screws from the mounting hardware kit. Ensure the VESA holes on your TV match the mount's compatibility (50x50mm to 400x400mm). Make sure no connectors on the TV are covered by the mount.
2. Označte vrtací body do zdi: Hold the wall plate of the mount against the desired position on your wall. Use a pencil to mark the drilling points through the holes on the wall plate. Use the included spirit level to ensure the marks are perfectly horizontal.
3. Vrtací otvory: Drill holes at the marked points on the wall. The drill bit size will depend on the type of wall and the anchors you are using. Insert the appropriate wall anchors into the drilled holes.
4. Nástěnná deska: Securely screw the wall plate to the wall using the appropriate screws and washers from the hardware kit. Ensure it is firmly attached and level.
5. Zavěste televizi: Carefully lift the television (with the attached brackets) and hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall mount.
6. Zabezpečení televizoru: Use the safety screws or locking mechanisms (if present on your specific model) to secure the TV to the wall mount, preventing accidental dislodgement.

Figure 5.1: Assembled Wall Mount

Obrázek 5.2: Strana View of Wall Mount

6. Provoz

This wall mount features a fixed design with a tilting capability. Once the TV is mounted, you can adjust the tilt angle to achieve the optimal viewing experience. The tilt mechanism allows for a slight downward angle, which can help reduce glare from overhead lighting.

• Nastavení sklonu: Gently push or pull the bottom of the TV to adjust the tilt angle. The mount is designed for smooth, continuous adjustment within its specified range.

7. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečnost vašeho nástěnného držáku.

• Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pravidelné kontroly: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement can cause screws to loosen.
• Kontrola poškození: Inspect the mount for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.

8. Řešení problémů

Pokud se během instalace nebo po ní setkáte s problémy, podívejte se na tato běžná řešení.

• TV není vodorovně: Ensure the wall plate is perfectly level before drilling. If the TV is already mounted, you may need to slightly adjust the wall plate or use shims if minor adjustments are needed. Re-check all connections.
• Mount se zdá být uvolněný: Re-tighten all screws securing the wall plate to the wall and the brackets to the TV. Ensure you are using appropriate anchors for your wall type.
• Obtížnost naklánění: Check for any obstructions behind the TV. Ensure the tilt mechanism is not overtightened (if applicable) or damaged.
• Chybějící části: Refer to the 'Package Contents' section. If parts are missing, contact TecTake customer support immediately.

9. Záruka a podpora

TecTake products are designed for quality and durability. For information regarding warranty coverage and customer support, please refer to your purchase documentation or visit the official TecTake webmísto.

Zásady vrácení: This product is typically eligible for a refund or replacement within 30 days of purchase, subject to the retailer's return policy.

For further assistance, please contact TecTake customer service.