Vivitar Micro SD Card Reader / Writer

Vivitar Micro SD Card Reader/Writer

Uživatelská příručka

1. Konec produktuview

The Vivitar Micro SD Card Reader/Writer is a compact device designed for convenient data transfer between Micro SD cards and computers or other compatible devices. It allows users to read data from and write data to Micro SD cards, facilitating easy management of photos, videos, documents, and other files.

Vivitar Micro SD Card Reader/Writer, black, showing the USB connector and the Micro SD card slot.

Obrázek 1: Vivitar Micro SD Card Reader/Writer. This image displays the compact black device, highlighting its USB connector on one end and the slot for inserting a Micro SD card on the side.

2. Nastavení

  1. Vložte Micro SD kartu: Gently insert your Micro SD card into the designated slot on the Vivitar card reader. Ensure the card is inserted with the gold contacts facing down (or as indicated by a small icon on the reader) until it clicks into place. Do not force the card.
  2. Připojit k zařízení: Plug the USB connector of the card reader into an available USB port on your computer, laptop, or other compatible device.
  3. Instalace ovladače (pokud je to nutné): Most modern operating systems (Windows, macOS, Linux) will automatically detect and install the necessary drivers for the card reader. If prompted, follow the on-screen instructions. No additional software is typically required.

3. Návod k obsluze

3.1 Přístup k datům

  1. Once connected, your computer should recognize the Micro SD card as a removable storage device (e.g., "Removable Disk" or a drive letter like E: or F:).
  2. Open "This PC" (Windows) or "Finder" (macOS) and locate the newly appeared drive.
  3. Double-click the drive icon to access the fileje uloženo na vaší Micro SD kartě.

3.2 Převod Files

  • Kopírovat files from the card to your computer: Drag and drop the desired files from the card's drive to a folder on your computer. Alternatively, right-click the files, select "Copy," navigate to your desired destination, right-click, and select "Paste."
  • Kopírovat files from your computer to the card: Drag and drop the desired files from your computer's folder to the card's drive. Alternatively, right-click the files, select "Copy," navigate to the card's drive, right-click, and select "Paste."

3.3 Bezpečné odebrání zařízení

Before physically disconnecting the card reader from your computer, always safely eject it to prevent data corruption.

  • Windows: Click the "Safely Remove Hardware and Eject Media" icon in the system tray (bottom-right corner), then select the Vivitar card reader. Wait for the "Safe to Remove Hardware" message.
  • MacOS: Drag the drive icon of the Micro SD card to the Trash, or right-click the drive icon and select "Eject."

4. Údržba

  • Čištění: Use a soft, dry, lint-free cloth to clean the exterior of the card reader. Do not use liquid cleaners or solvents. Ensure no dust or debris enters the card slot or USB connector.
  • Skladování: Store the card reader in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Keep it protected from physical impact.
  • Zacházení: Avoid bending or applying excessive force to the USB connector or the card slot.

5. Řešení problémů

  • Card Reader Not Detected:
    • Zkuste zapojit čtečku karet do jiného USB portu v počítači.
    • Ensure the Micro SD card is fully and correctly inserted into the reader.
    • Restartujte počítač.
    • Check if the USB port is functional by connecting another USB device.
  • Karta Micro SD nebyla rozpoznána:
    • Ensure the card is not damaged or corrupted. Try the card in another device if possible.
    • Verify the card is inserted correctly.
    • Check if the card reader itself is detected by the computer.
  • Pomalý přenos dat:
    • Ensure you are using a USB 2.0 or higher port for optimal speed (the device supports up to 480 Mbps).
    • The speed of the Micro SD card itself can affect transfer rates.
    • Vyhněte se spouštění více náročných aplikací během velkých file převody.
  • "Write Protected" Error:
    • Some Micro SD cards or adapters have a physical write-protect switch. Ensure it is in the "unlocked" position.

6. Specifikace

ZnačkaVivitar
ModelMicro SD Card Reader/Writer
Typ médiaMicroSD
Hardwarové rozhraníMicroSD (USB 2.0 compatible)
Rychlost přenosu datUp to 480 megabits per second (Mbps)
Kompatibilní zařízeníComputers, Laptops, and other devices with a USB port.
UPC681066875421
ASINB00IO2NZ9O

7. Záruka a podpora

For information regarding warranty coverage, technical support, or service inquiries for your Vivitar Micro SD Card Reader/Writer, please refer to the warranty card included with your purchase or visit the official Vivitar webwebu. Kontaktní údaje zákaznické podpory jsou obvykle k dispozici na obalu produktu nebo na stránkách výrobce. webmísto.

© 2023 Vivitar. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.