JJC TMC LCD Timer Remote Control Instruction Manual

Zavedení

The JJC TMC LCD Timer Remote Control is a versatile device designed for advanced camera control, functioning as both a remote shutter release and a programmable intervalometer. It is ideal for various photography techniques, including time-lapse, long exposure, and self-portraits, by preventing camera shake and offering precise timing control.

Konec produktuview

Komponenty a ovládací prvky

Familiarize yourself with the main components and controls of your JJC TMC remote control:

Obrázek 1: Přední view of the JJC TMC remote control with key components labeled, including the control panel, shutter release button, LED light/lock button, arrow buttons, timer start/stop button, and SET button.

Obrázek 2: Detailed diagram illustrating the numbered parts of the JJC TMC controller and the various indicators on its LCD screen, such as selection cursor, timer display, LOCK indicator, low power indicator, timer active indicator, speaker ON/OFF, SET indicator, RELEASE indicator, and number of shots.

Indikátory LCD displeje

• DE: Delay Timer (initial delay before sequence starts)
• BU: Bulb Timer (long exposure duration)
• INT: Interval Timer (time between shots)
• N: Number of Shots (total exposures)
• Selection Cursor: Indicates the currently adjustable parameter.
• Displej časovače: Shows current time settings.
• LOCK Indicator: Appears when buttons are locked.
• Indikátor nízké spotřeby: Upozornění na nízký stav baterie.
• Timer Active Indicator: Shows when a timer sequence is running.
• Zapnutí/vypnutí reproduktoru: Indicates audio feedback status.
• SET Indicator: Appears when a setting is being adjusted.
• RELEASE Indicator: Appears when the shutter is being released.

Nastavení

1. Instalace baterie

1. Najděte přihrádku na baterie na zadní straně dálkového ovladače.
2. Posunutím otevřete kryt baterie.
3. Vložte dvě baterie AAA a dbejte na správnou polaritu (+/-).
4. Pevně ​​zavřete kryt baterie.

2. Připojení k fotoaparátu

1. Ensure both the camera and the remote control are powered off.
2. Locate the remote control terminal on your Canon EOS camera (refer to your camera's manual for exact location).
3. Insert the remote control's cable plug firmly into the camera's remote control terminal.
4. Power on the remote control using the ON/OFF switch.

Obrázek 3: The JJC TMC remote control connected to a Canon camera via its cable, demonstrating proper connection for operation.

Návod k obsluze

Basic Shutter Release Function

• Namáčknutí: Press the Shutter Release Button halfway down to activate autofocus.
• Full-Press: Press the Shutter Release Button completely down to trigger the camera's shutter.
• Shutter Lock (for Bulb mode): For long exposures in Bulb mode, press the Shutter Release Button fully down and slide it upwards to lock it. This keeps the shutter open until you slide it back down.

Programming Timer Functions

The remote control allows programming of four main timer functions: Delay (DE), Bulb (BU), Interval (INT), and Number of Shots (N).

1. Zapnutí: Zapněte dálkový ovladač pomocí vypínače ON/OFF.
2. Vyberte parametr: Použijte Tlačítka se šipkami (up/down) to move the selection cursor between DE, BU, INT, and N on the LCD display.
3. Upravit hodnotu: Once a parameter is selected, press the Tlačítko SET. The digits will flash. Use the Tlačítka se šipkami (left/right) to select the digit to change, and the Tlačítka se šipkami (up/down) to adjust the value (hours, minutes, seconds).
4. Potvrdit nastavení: Stiskněte tlačítko Tlačítko SET again to confirm the value and move to the next digit or parameter.
5. Set Number of Shots (N): For 'N', you can set a value from 1 to 399. To set for unlimited shots, select 'N' and adjust until '--' is displayed.
6. Start Timer Sequence: After setting all desired parameters, press the Tlačítko Start/Stop časovače to begin the programmed sequence. The 'TIMER ACTIVE' indicator will appear.
7. Stop Timer Sequence: Stiskněte tlačítko Tlačítko Start/Stop časovače again to stop an active sequence.

Funkce zámku

To prevent accidental button presses during a timer sequence or long exposure, press the LED světlo / tlačítko zámku. The 'LOCK' indicator will appear on the LCD. Press it again to unlock.

Funkce podsvícení

Stiskněte tlačítko LED světlo / tlačítko zámku briefly to activate the LCD backlight for visibility in low-light conditions. The backlight will automatically turn off after a few seconds.

Údržba

• Čištění: K čištění dálkového ovladače používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
• Výměna baterie: When the low power indicator appears, replace both AAA batteries promptly to ensure optimal performance.
• Skladování: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Péče o kabely: Avoid bending or twisting the connection cable excessively to prevent damage.

Odstraňování problémů

Remote control does not power on:

Check if batteries are inserted correctly with proper polarity. Replace with fresh AAA batteries.

Camera does not respond to shutter release:

Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible shooting mode (e.g., P, Av, Tv, M, Bulb). Check camera battery level.

Timer sequence does not start or stops unexpectedly:

Confirm all timer parameters (DE, BU, INT, N) are set correctly. Ensure the 'TIMER ACTIVE' indicator is on. Check battery level. Note that turning off the remote control will reset all programmed settings.

LCD display is dim or blank:

Replace batteries. Use the backlight function in low light conditions.

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official JJC webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případ reklamace.