Uživatelská příručka k GoPro HD HERO2: Motorsports Edition

Zavedení

The GoPro HD HERO2: Motorsports Edition is an advanced camera designed for capturing high-quality video and photos in dynamic environments. It is widely used by motorsports professionals, race teams, and enthusiasts due to its durable, wearable, and gear-mountable design. The camera is waterproof up to 197 feet (60 meters) and capable of capturing professional-grade footage with a wide 170-degree field of view.

Co je v krabici

• Tělo fotoaparátu
• Baterie
• Držák přísavky
• Vodotěsné pouzdro
• Nabíječka
• USB konektor
• Konektory RCA
• Video konektory
• Flat mounts

Nastavení

Before first use, ensure the battery is fully charged. Connect the camera to the charger using the provided USB cable. The camera's LCD screen will indicate charging status.

Figure 1: GoPro HD HERO2 camera with waterproof housing and suction cup mount.

Insert a compatible SD card (Flash Memory Type: SD) into the camera's card slot. Ensure the waterproof housing is securely closed before exposing the camera to water or harsh environments.

Obsluha fotoaparátu

Nahrávání videa

The HD HERO2 supports various HD video resolutions:

• 1080P at 30 Frames Per Second (FPS)
• 960P at 30 and 48 FPS
• 720P at 30 and 60 FPS

To start recording, press the Shutter/Select button. Press it again to stop recording.

Pořizování fotografií

Capture still images with resolutions of 11MP, 8MP, or 5MP. The camera also features a 10 Photos Per Second Burst mode for capturing fast-action sequences.

Wi-Fi připojení

The camera is compatible with the Wi-Fi BacPac™ and Wi-Fi Remote™. This allows for long-range remote control of multiple cameras and Wi-Fi video preview and playback on a smartphone.

Oficiální videa produktů

Below are official product videos demonstrating the GoPro HD HERO2 in action. These videos are provided by the seller to showcase the camera's capabilities.

Údržba

To ensure optimal performance and longevity of your GoPro HD HERO2, follow these maintenance guidelines:

• Always ensure the waterproof housing is clean and free of debris before closing. Inspect the rubber seal for any damage.
• After use in saltwater, rinse the camera and housing with fresh water and allow to air dry.
• Čistěte čočku měkkým hadříkem, který nepouští vlákna. Nepoužívejte abrazivní materiály, které by mohly čočku poškrábat.
• Pokud fotoaparát nepoužíváte, uchovávejte jej na chladném a suchém místě.

Odstraňování problémů

If you encounter issues with your GoPro HD HERO2, consider the following common solutions:

• Camera Rattling or Loose Parts: If the camera rattles or feels loose, inspect all external screws and components. Ensure the battery compartment is securely closed. If internal rattling is suspected, contact customer support.
• Poor Image/Video Quality in Low Light: The camera performs best in well-lit conditions. For optimal results in low light, ensure adequate external lighting or adjust camera settings if available (though specific low-light settings are not detailed in provided features).
• Vibration Issues in Mounted Footage: When mounting the camera on vibrating surfaces (e.g., motorcycles), excessive vibration can affect video stability. Experiment with different mounting locations or consider vibration-dampening accessories if available.
• Connectivity Problems (Wi-Fi/USB): Ensure Wi-Fi BacPac™ is properly attached and powered. For USB connection, verify the cable is not damaged and the camera is recognized as a mass storage device by your computer.

Specifikace

Záruka a podpora

Podrobné informace o záruce a technickou podporu získáte na oficiálních stránkách GoPro. webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

Note: This product does not come with a charging or sync cord as per legal disclaimer.