Watt Stopper PW-200-G
Wattstopper PW-200-G Occupancy Sensor User Manual
Model: PW-200-G
Zavedení
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Wattstopper PW-200-G Occupancy Sensor. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Konec produktuview
The Wattstopper PW-200-G is a passive infrared (PIR) occupancy sensor designed for automatic lighting control in various indoor environments. It features dual relay type functionality and is suitable for small offices, conference rooms, and break rooms.
Klíčové vlastnosti:
- Detection signature processing eliminates false triggers.
- Dual relay type for versatile control.
- Compact dimensions: 2.73 inches L x 1.76 inches W x 1.83 inches D.
- Široký objemtage rating: 120/230/277 VAC at 50/60 Hz.
- Montáž na stěnu.
- Sensing distance up to 35 feet.
Vizuály produktu
Obrázek 1: Přední view of the Wattstopper PW-200-G Occupancy Sensor. The sensor is grey, designed for wall mounting, and features two push buttons at the top for manual control of the dual relays. The lower section contains the PIR lens for motion detection. Mounting screws are visible at the top and bottom of the metal bracket.
Nastavení a instalace
The PW-200-G sensor is designed for wall mount installation. Ensure power is disconnected before beginning installation.
Kroky instalace:
- Bezpečnost především: Turn off power at the circuit breaker before attempting any wiring.
- Zapojení: Connect the sensor according to the provided wiring diagram (not included in this general manual, refer to product packaging for specific diagrams). Ensure correct voltage connections (120/230/277 VAC).
- Montáž: Securely mount the sensor to the wall using the integrated mounting bracket and screws. Ensure it is positioned to cover the desired detection area effectively.
- Zapnutí: Obnovte napájení na jističi.
- Testování: Verify proper operation by walking through the detection area.
Důležité: Avoid installing the sensor near heat sources, air vents, or in direct sunlight, as these can interfere with its detection capabilities.
Návod k obsluze
The Wattstopper PW-200-G operates by detecting occupancy within its sensing range, automatically controlling connected loads (e.g., lights).
Automatický provoz:
- When occupancy is detected, the sensor will activate the connected load(s).
- After the area becomes vacant, the sensor will maintain the load(s) for a preset time delay before turning them off.
- The sensor's detection signature processing helps prevent false triggers, ensuring reliable operation.
Ruční ovládání (pokud je k dispozici):
The sensor may include manual override buttons (as suggested by the image with two push buttons). Refer to the specific product wiring diagram and instructions for details on manual control of the dual relays.
Údržba
The Wattstopper PW-200-G Occupancy Sensor requires minimal maintenance to ensure optimal performance.
- Čištění: Periodically wipe the sensor lens and housing with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents.
- Inspekce: Annually inspect the sensor for any visible damage or loose connections.
- Prostředí: Zajistěte, aby provozní prostředí zůstalo v rámci specifikovaného rozsahu teploty a vlhkosti.
Odstraňování problémů
If you experience issues with your Wattstopper PW-200-G Occupancy Sensor, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lights do not turn on with occupancy. | No power to sensor; incorrect wiring; sensor lens obstructed; sensor sensitivity too low. | Check circuit breaker; verify wiring connections; clear obstructions from lens; adjust sensitivity (if adjustable). |
| Lights turn off too quickly or too slowly. | Time delay setting incorrect. | Adjust the time delay setting (refer to specific product instructions for adjustment methods). |
| Lights turn on without occupancy (false triggers). | Heat sources or air currents in detection area; sensor sensitivity too high. | Relocate sensor away from heat/air sources; reduce sensitivity (if adjustable); ensure proper mounting. |
If the problem persists after attempting these solutions, contact a qualified electrician or Watt Stopper customer support.
Specifikace
| Atribut | Hodnota |
|---|---|
| Značka | Watt zátka |
| Číslo modelu | PW-200-G |
| Rozměry (D x Š x V) | 2.73 x 1.76 x 1.83 palce |
| Hmotnost | 6.4 unce |
| Materiál | PW |
| Barva | Šedá |
| Maximální objem dodávkytage | 277 voltů (AC) |
| Rozsah měření | 20 - 35 stop |
| Typ montáže | Držák na zeď |
| Typ výstupu | Digitální |
| Specifická použití | Indoor, Office, Break Room |
| Styl přepínání | Push Button Motion |
| Osvědčení | UL, CUL |
| UPC | 754182919321 |
Záruka a podpora
Specific warranty details for the Wattstopper PW-200-G Occupancy Sensor are typically provided with the product packaging or can be found on the official Watt Stopper website. For technical support, product inquiries, or warranty claims, please contact Watt Stopper customer service directly.
You can often find contact information and additional resources on the manufacturer's official webmísto: Watt Stopper Official Webmísto