Vileda 133346
Vileda 1-2 Spray Microfibre Mopping System
Model: 133346
Konec produktuview
The Vileda 1-2 Spray Microfibre Mopping System is designed for efficient and quick cleaning of hard floor surfaces, including wood and laminate. This all-in-one system features an integrated spray handle with a refillable liquid compartment, eliminating the need for a separate bucket.
Its durable microfibre pad is effective for both quick clean-ups of sticky and greasy marks and for deep cleaning, removing over 99% of bacteria with just water.

Figure 1: The Vileda 1-2 Spray Mop demonstrating its spray function.
Nastavení
- Rozbalení: Carefully remove all components from the packaging. Ensure you have the mop handle, mop head, and microfibre pad.
- Attaching the Mop Head: Align the mop head with the base of the handle and securely click it into place.
- Filling the Liquid Compartment:
- Locate the refillable liquid compartment on the mop handle.
- Open the cap of the compartment.
- Pour your desired cleaning solution or water into the compartment. Do not overfill.
- Bezpečně uzavřete víčko.

Figure 2: Filling the liquid compartment on the mop handle.
- Attaching the Microfibre Pad: The microfibre pad attaches to the mop head using a hook-and-loop system. Simply press the pad firmly onto the mop head until it is securely attached.
Návod k obsluze
- Příprava na čištění: Ensure the liquid compartment is filled and the microfibre pad is securely attached.
- Postřik: To release a mist of cleaning solution, squeeze the trigger located on the mop handle. The spray mechanism is designed to deliver an optimal amount of liquid for effective cleaning without oversaturating the floor.
- Vytírání: Glide the mop across the floor surface. The swivel head allows for easy maneuverability around furniture and into corners.
- Pro nejlepší výsledky: For stubborn marks, spray directly onto the area and allow the solution to penetrate briefly before mopping.

Figure 3: Demonstrating the Vileda 1-2 Spray Mop in use.
Údržba
- Cleaning the Microfibre Pad: The microfibre pad is machine washable. Remove it from the mop head after each use and wash it with similar colors. Do not use fabric softener, as it can reduce the pad's effectiveness.
- Emptying the Liquid Compartment: If you are storing the mop for an extended period, it is recommended to empty any remaining liquid from the compartment to prevent residue buildup.
- Cleaning the Mop Head: Wipe the mop head and handle with a damp hadříkem dle potřeby odstraňte prach nebo nečistoty.
- Skladování: Store the mop in a dry place, away from direct sunlight.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Mop not spraying | Liquid compartment is empty. | Refill the liquid compartment. |
| Mop not spraying | Tryska je ucpaná. | Clean the spray nozzle with a small brush or pin. |
| Pad not cleaning effectively | Pad is dirty or worn out. | Wash or replace the microfibre pad. |
| Šmouhy zanechané na podlaze | Too much cleaning solution used. | Use less solution or dilute it further. Ensure pad is clean. |
Specifikace
- Číslo modelu: 133346
- Značka: Vileda
- Rozměry produktu: 2.56 x 5.91 x 50.79 palce
- Hmotnost položky: 0.88 libry (14.08 unce)
- Materiál rukojeti: Plast
- Materiál hlavy: Mikrovlákno
- Doporučení pro povrch: Floor, Wood, Laminate
Záruka a podpora
For warranty information or technical support, please refer to the official Vileda website or contact Vileda customer service directly. Contact details can typically be found on the product packaging or the manufacturer's official webmísto.
Note: This product was first available on August 7, 2012.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.