Casio Replacement Watch Band for AMW-700 Series User Manual

Zavedení

This document provides instructions for the installation, care, and specifications of the Casio 10198354 genuine factory replacement watch band. This band is designed to fit various Casio AMW-700 series watch models, including AMW-700, AMW-700B, and AMW-700D. It features a combination of genuine leather and durable nylon (cloth) with a stainless steel buckle, offering a comfortable and secure fit.

Obsah balení

• One (1) Casio 10198354 Replacement Watch Band (Gray & Black)
• Note: Spring bars for attachment are typically reused from the original band or purchased separately if needed.

Nastavení a instalace

Replacing a watch band requires careful handling to avoid scratching your watch. If you are unsure, it is recommended to seek assistance from a professional watch repair service.

Požadované nástroje:

• Small spring bar tool or a small, flat-head screwdriver.
• Soft cloth or protective surface.

Kroky instalace:

1. Připravte si pracovní prostor: Položte hodinky ciferníkem dolů na měkký, čistý hadřík, abyste zabránili poškrábání.
2. Odstraňte starý pásek:
   • Locate the spring bars that hold the current watch band to the watch lugs.
   • Pomocí nástroje na pružinové tyče nebo malého šroubováku jemně zatlačte jeden konec pružinové tyče.
   • Carefully pull the band away from the watch lug to release the spring bar.
   • Opakujte pro druhou stranu řemínku a pro druhou polovinu řemínku hodinek.
   • Keep the old spring bars if they are in good condition, as they will be needed for the new band.
3. Instalace nového pásku:
   • Insert one end of a spring bar into one of the holes on the watch lug.
   • Place the new watch band section between the lugs.
   • Using the spring bar tool, compress the other end of the spring bar and guide it into the corresponding hole on the opposite lug.
   • Gently tug on the band to ensure it is securely seated and the spring bar is properly engaged in both holes.
   • Repeat this process for the second half of the watch band.

Figure 1: The Casio 10198354 replacement watch band, featuring its gray nylon strap, black leather accents, and stainless steel buckle. This image displays the complete band assembly.

Provoz a seřízení

Once installed, the watch band can be adjusted to fit your wrist comfortably using the buckle. The band features multiple holes to allow for various wrist sizes.

• Úprava střihu: Insert the buckle pin into the desired hole on the strap to achieve a snug yet comfortable fit. The two keepers (loops) should be used to secure the excess strap.

Obrázek 2: Podrobný view of the stainless steel buckle and the textured nylon strap with visible stitching. This shows the mechanism for adjusting the band's length.

Údržba a péče

Proper care will extend the life and appearance of your watch band.

• Čištění:
  • For the nylon (cloth) portion, gently wipe with a damp cloth and mild soap if necessary. Rinse thoroughly with clean water and allow to air dry completely.
  • For the leather portions, wipe with a dry or slightly damp cloth. Avoid excessive moisture. Do not use harsh chemicals or abrasive cleaners.
• Vyhýbat se vystavení: Minimize prolonged exposure to direct sunlight, extreme temperatures, and harsh chemicals (e.g., perfumes, solvents) as these can degrade the materials.
• Sušení: If the band gets wet, allow it to air dry naturally. Do not use artificial heat sources like hair dryers.

Obrázek 3: Detailní záběr view of the leather attachment points of the watch band, showing the stitching and the "FISHING GEAR" embossing on one side, indicating its design for specific Casio models.

Odstraňování problémů

• Pásek nesedí: Ensure you have the correct spring bar size and that the spring bars are properly seated in the lug holes. This band is specifically designed for Casio AMW-700 series watches.
• Nepohodlí nebo podráždění: Ensure the band is not too tight. If irritation persists, clean the band thoroughly or consult a dermatologist.
• Obtížnost instalace pružinových tyčí: Ensure the spring bar tool is correctly positioned. Sometimes, a slight angle or gentle pressure is needed to compress the spring bar sufficiently.

Specifikace

Záruka a podpora

For warranty information or technical support regarding your Casio watch band, please refer to the official Casio webnebo se obraťte přímo na zákaznický servis Casio. Uschovejte si účtenku jako doklad o koupi.

You can visit the official Casio store for more information: Obchod Casio na Amazonu