JWIN JSP202 2.1 Channel PC Speaker System User Manual

Zavedení

Thank you for choosing the JWIN JSP202 2.1 Channel PC Speaker System. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new speaker system. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Konec produktuview

Vlastnosti

• Integrovaný 2.1kanálový zvuk amplifier for rich sound.
• Independent master volume and subwoofer level controls for customized audio.
• Magnetically shielded satellite speakers to prevent interference with other electronic devices.
• Easy installation and compatibility with computers and various audio devices.
• Total audio output: 22 Watts RMS / 44 Watts Peak.

Identifikace součásti

The JWIN JSP202 system consists of one subwoofer unit and two satellite speakers. The main controls are typically located on the subwoofer unit.

Obrázek 1: JWIN JSP202 2.1 Channel PC Speaker System. This image displays the central subwoofer unit and the two compact satellite speakers, illustrating the complete system components.

Seznamte se s následujícími komponenty:

• Subwooferová jednotka: Obsahuje hlavní amplifier, bass speaker, and control panel (master volume, subwoofer volume, power switch, audio input/output ports).
• Satellite Speakers (x2): Compact speakers for mid-range and high-frequency audio. Connect to the subwoofer.
• Audio vstupní kabel: For connecting to your PC or other audio source.
• Napájecí kabel: Pro připojení subwooferu k elektrické zásuvce.

Nastavení

Připojení systému reproduktorů

1. Umístění: Place the subwoofer on the floor or a sturdy surface, ideally near your computer. Position the satellite speakers on either side of your monitor, ensuring they are equidistant from your listening position for optimal stereo imaging.
2. Připojení satelitních reproduktorů: Connect the cables from the two satellite speakers to the corresponding output jacks on the back of the subwoofer unit. Ensure a secure connection.
3. Připojení ke zdroji zvuku: Plug the audio input cable (usually a 3.5mm stereo jack) from the subwoofer into the audio output jack (headphone jack or line-out) of your computer or other audio device.
4. Připojte napájení: Plug the power cable into the power input on the subwoofer unit, then plug the other end into a standard electrical outlet.
5. Zapnutí: Turn on the power switch, usually located on the subwoofer unit. The power indicator light should illuminate.

Obrázek 2: Connection Diagram. This image, representing the JWIN JSP202 system, illustrates the typical connection points for satellite speakers, audio input from a device, and power supply to the subwoofer unit.

Návod k obsluze

Zapnutí/vypnutí

Locate the power switch on the subwoofer unit. Flip the switch to the "ON" position to power on the system. Flip it to "OFF" to power down. An indicator light will confirm the power status.

Nastavení hlasitosti

The system features a master volume control, typically a rotary knob or tactile control on the subwoofer. Rotate clockwise to increase volume and counter-clockwise to decrease. You may also adjust the volume from your connected audio device (e.g., computer operating system).

Adjusting Subwoofer Level

A separate subwoofer volume control allows you to adjust the bass intensity. Adjust this control to achieve your desired balance between bass and the satellite speakers' output.

Audio Source Selection (If Applicable)

If your system has multiple audio input options, use the input selector (if present) to choose the desired audio source. For the JSP202, it primarily uses a single 3.5mm audio input.

Údržba

Čištění

• Always unplug the speaker system from the power outlet before cleaning.
• Use a soft, dry cloth to wipe down the surfaces of the speakers and subwoofer.
• Nepoužívejte tekuté čisticí prostředky, aerosoly ani abrazivní materiály, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.

Skladování

If storing the system for an extended period, disconnect all cables and pack the components in their original packaging or a suitable protective container. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Odstraňování problémů

Specifikace

Záruka a podpora

Specific warranty information for the JWIN JSP202 2.1 Channel PC Speaker System is not provided in this document. For detailed warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official JWIN webUschovejte si účtenku jako doklad o koupi pro případné reklamace.