1. Úvod a konecview
The Netgear FS605-300PES is a 5-port 10/100 Mbps Fast Ethernet switch designed to expand your network connectivity. This unmanaged switch provides a simple and efficient way to connect up to five Ethernet-enabled devices to your network, such as computers, printers, and gaming consoles. It features automatic speed detection for 10 Mbps or 100 Mbps devices and Auto-Uplink (Auto MDI-X) functionality, which automatically adjusts for straight-through or crossover cables. The FS605 operates silently due to its fanless design and includes front-panel LED indicators for quick status monitoring.
2. Obsah balení
Ověřte, zda váš balíček obsahuje následující položky:
- Netgear FS605 Fast Ethernet Switch
- Napájecí adaptér
- Průvodce instalací
- Záruční registrační karta
- Informační karta podpory
3. Vlastnosti produktu
- 5 rychlých ethernetových portů: Provides five 10/100 Mbps RJ-45 ports for network expansion.
- Auto-Uplink (Auto MDI-X): Automatically detects and adjusts for straight-through or crossover Ethernet cables on all ports.
- Full-Duplex Communication: Supports full-duplex mode for maximum data throughput.
- Flow Control (IEEE 802.3x): Ensures reliable data transmission by preventing packet loss during network congestion.
- Architektura Store-and-Forward: Improves network integrity by checking for errors before forwarding data.
- Design bez ventilátoru: Operates silently, suitable for quiet environments.
- LED indikátory: Front-panel LEDs display power, link status, and activity for each port.
- Kompaktní design: Small footprint for flexible placement.
4. Nastavení
Follow these steps to set up your Netgear FS605 switch:
- Připojte napájecí adaptér: Plug the included power adapter into the DC power input port on the rear of the switch. Connect the other end of the adapter to a standard electrical outlet. The Power LED on the front panel should illuminate.
- Připojení k síti: Connect an Ethernet cable from your router or modem to any of the five RJ-45 ports on the switch. The corresponding Link/Activity LED for that port will light up.
- Připojit zařízení: Connect your network devices (e.g., computer, laptop, printer, gaming console) to the remaining RJ-45 ports on the switch using standard Category 5 (or higher) Ethernet cables. The Link/Activity LED for each connected device's port will illuminate, indicating a successful connection.
Obrázek 1: Přední view of the Netgear FS605-300PES switch, displaying the power indicator and five port status LEDs.
Obrázek 2: Zadní view of the Netgear FS605-300PES switch, illustrating the power input and the five Ethernet ports.
Přepínač je plug-and-play a nevyžaduje žádnou softwarovou konfiguraci.
5. Návod k obsluze
Once connected, the Netgear FS605 switch operates automatically. It functions as an unmanaged device, requiring no user intervention for basic network traffic management.
LED indikátory
- LED napájení: Svítí, když je spínač zapnutý.
- Link/Activity LEDs (1-5): Each port has a corresponding LED.
- Svítí zelená: Indicates a valid network link at 100 Mbps.
- Pevný jantar: Indicates a valid network link at 10 Mbps.
- Bliká: Indicates network activity (data transmission or reception) on that port.
- Vypnuto: No link detected or device is not connected.
6. Údržba
The Netgear FS605 switch requires minimal maintenance:
- Čištění: Udržujte zařízení čisté a bez prachu. K čištění používejte měkký, suchý hadřík. Nepoužívejte tekuté ani aerosolové čisticí prostředky.
- Větrání: Although fanless, ensure the switch is placed in a location with adequate airflow to prevent overheating. Do not block ventilation openings.
- Prostředí: Operate the switch within the specified temperature and humidity ranges (refer to Specifications section). Avoid direct sunlight, heat sources, and excessive moisture.
7. Řešení problémů
If you encounter issues with your Netgear FS605 switch, refer to the following troubleshooting tips:
- Bez napájení: If the Power LED is off, ensure the power adapter is securely connected to both the switch and a working electrical outlet. Try a different outlet if necessary.
- Kontrolka LED bez spojení/aktivity: If a Link/Activity LED does not illuminate for a connected device:
- Verify that the Ethernet cable is securely plugged into both the switch port and the device's network port.
- Zkuste jiný ethernetový kabel.
- Ujistěte se, že je připojené zařízení zapnuté a jeho síťový adaptér funguje správně.
- Zkuste zařízení připojit k jinému portu na přepínači.
- Pomalá rychlost sítě: If network performance is slower than expected:
- Check the Link/Activity LED color. Green indicates 100 Mbps, Amber indicates 10 Mbps. Ensure your devices and cables support 100 Mbps if desired.
- Ensure all connected devices are functioning optimally.
- Avoid using excessively long or damaged Ethernet cables. The maximum recommended cable length is 100 meters.
- Přerušované připojení: If the switch occasionally stops functioning or loses connection, try restarting the device by unplugging and re-plugging the power adapter. If the issue persists, ensure the switch is not placed in an area prone to electromagnetic interference.
8. Technické specifikace
| Funkce | Specifikace |
|---|---|
| Model | FS605-300PES |
| Počet portů | 5 x 10/100 Mbps RJ-45 |
| Rychlost přenosu dat | 100 Mbps (Fast Ethernet) |
| Protokoly | IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow Control |
| Způsob přepínání | Store-and-forward |
| Velikost tabulky MAC adres | 1024 záznamů |
| Vyrovnávací paměť | 128 kB |
| Latence | < 20 microseconds (for 64-byte frame, 100 Mbps to 100 Mbps) |
| Spotřeba energie | 7.5W maximálně |
| Rozměry (D x Š x V) | 116.57 mm x 89.75 mm x 34.42 mm |
| Hmotnost | 0.13 kg (130 gramů) |
| Provozní teplota | 0 °C až 40 °C (32 °F až 104 °F) |
| Skladovací teplota | -20 °C až 70 °C (-4 °F až 158 °F) |
| Provozní vlhkost | 90% nekondenzující |
| Úroveň hluku | 0 dB (fanless) |
| Maximální délka kabelu | 100 metrů (328 stop) |
| Elektromagnetická shoda | CE mark, FCC Part 15 Class B, EN 55022 Class B, C-Tick, EN 55024 |
| Kompatibilita systému | Windows®, Mac® OS, NetWare®, Linux® |
9. Záruka a podpora
The Netgear FS605-300PES switch comes with a 3letá záruka výrobce. Please refer to the Warranty Registration Card included in your package for detailed terms and conditions.
For technical support, product registration, and additional resources, please refer to the Support Information Card provided with your product or visit the official Netgear support website. Keep your product's model number (FS605-300PES) and serial number handy when contacting support.
