CROSLEY-LOGO

CROSLEY CO7309 Outdoor Towel Valet

CROSLEY-CO7309-Outdoor-Towel-Valet-PRODUCT

PART LIST

CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-1

HARDWARE LIST

CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-2

  • Step 1. Lay long side panels (part A) down on a soft flat surface, such as a carpet, as shown below. Attach locking casters (part I) and swivel casters (part J) to long side panels (part A). CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-3
  • Step 2. Attach short side panels (part B) to the long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4)
    NOTE: Please do not fully tighten bolts until the unit is fully assembled.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-4
  • Step 3. Attach long side panel (part A) to short side panels (part B) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
    NOTE: Please do not fully tighten bolts until the unit is fully assembled. CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-5
  • Step 4. Attach bottom panel (part C) to long side panels (part A) and short side panels (part B) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ). NOTE: Please do not fully tighten bolts until the unit is fully assembled.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-6
  • Step 5. Attach shelf (part C) to long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
    NOTE: Please do not fully tighten bolts until the unit is fully assembled.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-7
  • Step 6. Attach top frame (part D) to long side panels (part A) using long bolts (part #2), flat washers (part #3), and Allen wrench (part #4 ).
    NOTE: Please do not fully tighten bolts until the unit is fully assembled.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-8
  • Step 7. Attach connectors (part G) to the top frame (part D) and long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
    NOTE: Please do not fully tighten bolts until the unit is fully assembled.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-9
  • Step 8. Fully insert ribs (part E) into the hub (part F) until spring clips click into place.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-10
  • Step 9. Unfold the top cover (part K) and attach it to the assembled unit (parts E & F) as shown below. Attach final (part H) to a hub (part F) of assembled unit (parts E, F & K) to secure together. CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-11
  • Step 10. Attach assembled unit (parts E, F, H & K) to connectors (part G) using bolts (part #1 ), flat washers (part #3) and Allen wrench (part #4 ). NOTE: Please fully tighten all bolts at this time.CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-12
  • Step 11. Secure fabric curtain (part L) to top frame (part D) using Velcro® straps as shown.
    NOTE: Fabric curtain (part L) can be held open by using the Velcro® straps to secure them to long side panels (part A) as shown below.

CROSLEY-CO7309-Outdoor-Towel-Valet-FIG-13

Documents / Resources

CROSLEY CO7309 Outdoor Towel Valet [pdf] Instruction Manual
CO7309 Outdoor Towel Valet, CO7309, Outdoor Towel Valet

Leave a comment

Your email address will not be published.