Categories: Creative

CREATIVE EF0810 SXFI Air Gamer Headphones User Manual

CREATIVE EF0810 SXFI Air Gamer Headphones



Pairing a Bluetooth Device:

  • Press and hold for 2s to initiate Bluetooth Pairing mode. RGB Lighting will start blinking in blue. Press and hold for 2s again to exit Bluetooth Pairing mode
  • Select “Creative SXFI AIR GAMER” from the list of discovered Bluetooth devices to pair. RGB lighting will remain in static state once paired with a device
    Voice Prompt: Now in Pairing Mode, Waiting for Connection
    • While in Bluetooth pairing mode, SXFI AIR GAMER will exit discovery mode if no device is paired within 5 mins

Removing Previously Paired Bluetooth Devices:

Press and hold for 8s until the RGB Lighting blinks twice in red. RGB Lighting will revert to default color once Bluetooth Reset is complete
Voice Prompt: Bluetooth Reset

Enabling Bluetooth Low Energy (BLE) Pairing:

  • The SXFI Control app is required to establish BLE connection in order to load your Super X-Fi profile onto Creative SXFI AIR GAMER
  • Press and hold for 2s to initiate Bluetooth Pairing mode

Selecting Input Source for Audio Playback:

  • Press the Bluetooth / Source button once to switch playback source in the following order:
  • Bluetooth / MicroSD Card / USB Audio / GamerChat
    Voice Prompt: Bluetooth / MicroSD Card / USB Audio / GamerChat


  • Nintendo Switch works with Line-in mixed with other sources


Windows PC Setup

  1. Settings > System > Sound > Sound Control Panel > Playback Tab > SXFI AIR GAMER > Right Click and “Set as Default Device”
  2. Configure > Select “7.1 Surround” > Check all “Optional speakers” > Setup Complete

Mac Setup

  1. Audio Midi Setup > SXFI AIR GAMER > Output > Format > 8 ch 32-bit integer 96 kHz
  2. Click Configure Speakers > Configuration > Select “7.1 Rear Surround” > Click Apply > Setup Complete


Creative SXFI AIR GAMER has a built-in battery for wireless audio playback that will last up to 11 hours per charge. When plugged into a power source, SXFI AIR GAMER’s built-in LED will light up in red. When the headset is turning on, the RGB Lighting will light up to indicate its current battery level


  • SXFI AIR GAMER will not power on when battery level is too low. Please charge the headset immediately when battery level is low to prevent battery degradation
  • SXFI AIR GAMER will power off automatically after 10 minutes of inactivity in the following modes: Bluetooth / Line-in / MicroSD Card
  • The headset will start charging when connected via USB to a power source except in the following modes: USB mode / Mass Storage mode
  • For added convenience, battery level is also indicated in the mobile app when connected


Increase Volume
• Swipe up to increase volume
Decrease Volume
• Swipe down to decrease volume
Note: SXFI AIR GAMER will play a tone at max / min volume

Previous Track

• Swipe left to return to previous track
Next Track
• Swipe right to skip to next track

Call Panning Function:

• Swipe left / right while on a call to activate Call Panning
• Default Call Direction: Center
• Cycle Sequence (Swipe Left): Right > Center > Left
• Cycle Sequence (Swipe Right): Left > Center > Right

Initiating Voice Assistant:

• Tap and hold for 2s to initiate voice assistant
Incoming Voice Calls:
• Tap twice to answer incoming voice call
• Tap twice again to end voice call
Initiating Audio Playback:
• Tap twice to continue audio playback from selected input source
• Tap twice again to pause audio playback from selected input source
Mass Storage Mode:
• Tap and hold with two fingers for 4s to enter Mass Storage mode
• Tap and hold with two fingers for 4s again to exit Mass Storage mode
Note: It takes 15s to enable / disable Mass Storage mode. The headset will play two short beeps when enabling / disabling the mode
Shuffle Mode:
• Tap once to shuffle music playback

Voice Prompt: Shuffle On / Shuffle Off

  • Ensure that SXFI AIR GAMER is connected to a Bluetooth-enabled device before attempting the gestures
  • Shuffle mode is only available in MicroSD card playback


GamerChat is a function that allows users to simultaneously chat with friends via Bluetooth while playing games when the headset is connected to a USB source. GamerChat requires Super X-Fi to be turned on as well as both Bluetooth and USB audio to be connected at the same time to work.

GamerChat’s Audio Layout


  • Super X-Fi cannot be turned off while using GamerChat. Ensure that Super X-Fi is enabled when in GamerChat mode
  • Both Bluetooth and USB audio’s volumes can only be controlled via its respective original audio source
  • Ensure that Creative SXFI AIR GAMER is connected to both Bluetooth and USB audio before using GamerChat
  • For more information on GamerChat, visit


Factory reset is reserved for scenarios where users encounter problems such as Bluetooth pairing problems or other connectivity issues. Follow the steps below to reset your SXFI AIR GAMER:

  • Press the power button and bluetooth button  simultaneously for 5s until RGB Lighting blinks twice in red
  • RGB Lighting will revert to default color once Factory Reset is complete
  • Alternatively, Factory Reset can also be triggered via SXFI Control software or
    SXFI AIR Control app
    Voice prompt: Reset to Factory Default


Unleash the performance of Super X-Fi with SXFI App. The app allows you to personalize your Super X-Fi profile through an advanced Head & Ear-Mapping process for a complete Super X-Fi experience.


Download SXFI Control for PC / Mac or SXFI AIR Control for mobile devices to unlock the headset’s full potential with Super X-Fi profile personalization, Graphic Equalizer and RGB Light customization

Download SXFI Control for PC / Mac from:

Download SXFI AIR Control for mobile devices from:

  • iOS App Store
  • Google Play Store



  • Driver: 50 mm Neodymium magnet
  • Frequency response: 20–20,000 Hz
  • Impedance: 32Ω
  • Sensitivity: 114 dB / mW @ 1 kHz
  • USB input: 5V

Microphone (CommanderMic)

  • Type: Unidirectional noise-reduction
  • Frequency response: 100–16,000 Hz
  • Impedance: < 2.2 kΩ
  • Sensitivity: -42 dB @ 1 kHz

Microphone (NanoBoom)

  • Type: Unidirectional noise-reduction
  • Frequency response: 100–8,000 Hz
  • Impedance: < 2.2 kΩ
  • Sensitivity: -38 dB @ 1 kHz
  • Operating Frequency: 2402–2480 MHz
  • Wireless Type: Bluetooth 5.0
  • Bluetooth Profiles:
    • A2DP (Wireless stereo Bluetooth)
    • AVRCP (Bluetooth remote control)
    • HFP (Hands-free profile)
  • Input: 5V 1A
  • RF Output Power: < 4 dBm
  • Operating temperature: 0–45°C
  • Wireless Range: Up to 10m / 33 ft
  • Charging Time: 2.5 hrs
  • Play Time: Up to 11 hrs playback time
  • Audio Codec: SBC
  • Lithium Ion Battery: 3.7V 1300 mAh (4.81 Wh

Note: Compliance markings are located on the surface upon removal of ear cup cushion which can be removed by hand


Please visit for the user guide, safety and regulatory information and battery removal instruction, which is meant strictly for independently qualified professional.


Registering your product ensures you receive the most appropriate service and product support available. You can register your product at

© 2020 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Sound Blaster, X-Fi, the X-Fi Logo, SXFI, the Super X-Fi Logo, Super X-Fi Ultra-DSP Logo, Headphone Holography and inPerson are trademarks
or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. The Bluetooth® word mark and logo are owned by the Bluetooth® SIG, Inc. and any use of such marks by Creative
Technology Ltd. and its affiliates is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Use of this product is subject to a limited hardware warranty. Actual contents may differ slightly from those pictured.

Documents / Resources

CREATIVE EF0810 SXFI Air Gamer Headphones [pdf] User Manual
EF0810, SXFI Air Gamer Headphones



Recent Posts

CLEANICA 360 KJ260G-E601 Air Purifier Owner’s Manual

KJ260G-E601 Air Purifier AIR PURIFIER Owner's Manual Save These Instructions ­ For Household Use Only…

6 seconds ago

Lenovo Legion S600 Gaming Station User Guide

Legion S600 Gaming Station Lenovo Legion S600 Gaming Station SP4 1 B6 4 1…

32 seconds ago

GASTEC 351A-30 30m Extension Hose Instruction Manual

351A-30 30m Extension Hose 30m Extension hose No.351A-30 Instruction manual FOR SAFE OPERATION Read this…

49 seconds ago

MODERN ELECTRONICS High-Performance General-Purpose Oscilloscope User Guide

High-Performance General-Purpose Oscilloscope Test Instruments Oscilloscope User's Guide Part 2 (Conclusion) A close-up look at…

1 min ago

YOlanda Smart Kitchen Scale Instructions

Smart Kitchen Scale EFqEF è,(l" !@,l '0G¬ l"0 b b ã( h¶x ! 1 $0"…

2 mins ago

scenex LIGHTING PP4 Pixel Driver Instruction Manual

PP4 Pixel Driver PP4 Pixel Driver Instructions Manual (Version 1.0) Scenex Lighting Safety Instructions…

2 mins ago