CORSAIR XTM70 Extreme Performance Thermal Paste Kit
BOX CONTENTS
- XTM70 3g EXTREME PERFORMANCE THERMAL PASTE
- APPLICATOR CARD
- APPLICATOR TEMPLATE
- CLEANING WIPES
APPLICATION GUIDE
WARNING: Please handle the XTM70 with care. Improper use and/or handling may cause personal injury.
- Prepare the cooling unit and wipe the surface clean with supplied [D] Cleaning Wipes.
- Peel the protective film from the [C] Applicator Template then apply it onto the cooling unit.
- Dispense a small amount of the [A] XTM70 into the [C] Applicator Template cut-outs, then spread evenly using the [B] Applicator Card.
- Carefully remove the [C] Applicator Template from the cooling unit.
- Install the cooling unit onto the contact surface as instructed by the unit manufacturer.
CONTACT US
- Web: corsair.com
- Phone: (888) 222-4346
- Warranty: corsair.com/support/warranty
- Support: support.corsair.com
- Blog: corsair.com/blog
- Forum: forum.corsair.com
- YouTube: youtube.com/corsairhowto
© 2022 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002652 AA
Documents / Resources
 |
CORSAIR XTM70 Extreme Performance Thermal Paste Kit [pdf] User Guide XTM70, Extreme Performance Thermal Paste Kit, Thermal Paste Kit, Extreme Performance Paste Kit, Paste Kit |
CORSAIR Site Maintenance 
