User Manual

Corsair logo

Corsair CARBIDE Series 200R Compact ATX Case

Corsair CARBIDE Series 200R Compact ATX Case

THANK YOU

Thank you for purchasing a Corsair® Carbide Series® 200R. With its elegant design and extensive feature set, 200R is a great case for beginning builders, or anybody looking for a compact, easy-to-use case.

Easy builds
Less work. More play. Build with the Carbide Series 200R and the only time you’ll need to pick up a screwdriver is to install the motherboard.

  • Side panel thumbscrews
  • PCI-E expansion card thumbscrew mounts
  • Tool-free SSD, hard drive, and optical drive installation
  • Cutouts for cable routing and CPU cooling

Easy to expand, and easy to cool
Carbide Series 200R is compact, but it’s designed to let you build high-performance systems with massive storage, extra graphics performance, and superior cooling and ventilation.

  • Seven PCI-E slots with room for cards up to 320mm long
  • Install up to four hard drives and four SSDs at once
  • Up to eight fan mounts (depending on hard drive configuration)

Easy to use
The mid-tower form factor combines room for expandability and out-of-the-way exterior dimensions.

  • Front panel USB 3.0, headphone and microphone ports
  • Dust filters behind the front intake fans help keep the interior clean

 

CONTENTS

FIG 1 CONTENTS

FIG 2 CONTENTS

 

FIG 3 Maximum GPU Length

 

CARBIDE SERIES® 200R MID-TOWER CASE

 

BRILLIANT DESIGN, INSIDE AND OUT ™

FIG 4 BRILLIANT DESIGN, INSIDE AND OUT ™

 

FIG 5 BRILLIANT DESIGN, INSIDE AND OUT ™

 

  • (A) Dual 120mm/140mm fan mounts compatible with 240mm/280mm radiators
  • (B) Dual 120mm/140mm fan mounts
  • (C) USB 3.0 (x2) Headphone/Mic, Power/Reset
  • (D) Dual 120mm fan mounts
  • (E) CPU backplate cutout
  • (F) Built-in cable routing cutouts
  • (G) Tool-free optical drive bays
  • (H) Tool-free 3.5″ hard drive cage with 2.5″ compatibility
  • (I) Seven expansion slots for GPUs
  • (J) Removable dust filters
  • (K) Built-in cable routing channel

 

1. Removing the side panels

FIG 6 Removing the side panels

Unscrew thrumbscrews and remove, then pull side panels outward

 

2. Installing the motherboard

FIG 7 Installing the motherboard

  • Install your motherboard’s I/O shield (see motherboard manual for guidance)
  • Align motherboard with the standos in the case
  • Secure with included screws (MBD/HDD screws)

 

3. Installing the Power Supply (PSU)

FIG 8 Installing the Power Supply

  • Place PSU on the bottom of the case
  • Align holes & secure with screws
  • NOTE: PSU can be installed in either fan up or fan down orientation

 

4. Installing the PCI-E/PCI Cards

FIG 9 Installing the PCI-E OR PCI Cards

  • Remove thumbscrews and corresponding slot cover(s)
  • Install the add-on card & secure with thumbscrew

 

5. Installing 5.25″ Drive/Devices

FIG 10 Installing 5.25 Drive OR Devices

  • Remove the front panel blank for the 5.25″ drive bay
  • Insert the drive, pulling back the tool-free latch until it aligns with the mounting holes on your device, then release

 

6. Installing 3.5″ HDD/ 2.5″ SSD

FIG 11 Installing 3.5 Inch HDD OR  2.5 Inch SSD

 

7. Attach case fan cables to motherboard headers

FIG 12 Attach case fan cables to motherboard headers

  • See motherboard manual for fan header locations

 

8. Installing front I/O connectors

FIG 13 Installing front I or O connectors

  • See motherboard manual for front panel header locations and pin-outs

 

Corsair logo

46221 Landing Parkway • Fremont • California • 94538 • USA

© 2012 Corsair Components, Inc. All rights reserved. Corsair, the sails logo, and Carbide Series are registered trademarks in the United States and/or other countries.

All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. Document Number: 49-000178 revAA

 

Read More About This Manual & Download PDF:

Corsair CARBIDE Series 200R Compact ATX Case User Manual – Download [optimized]
Corsair CARBIDE Series 200R Compact ATX Case User Manual – Download

Questions about your Manual? Post in the comments!

Leave a comment

Your email address will not be published. Required fields are marked *