CC2400 Wireless Optical Mouse Keyboard
“
Product Information
Specifications:
- Model: CC2400
- Keyboard FCC ID: 2AVRVK902
- Mouse FCC ID: 2AVRVMQ3S
Product Usage Instructions
Troubleshooting for Keyboard and Mouse Issues:
- Step 1: Unplug the USB receiver from your computer.
- Step 2: Remove the batteries from both the keyboard and
mouse. - Step 3: Install fresh batteries into the keyboard.
- Step 4: Insert the USB receiver into a USB port on your
computer. - Step 5: Turn on the switch on the keyboard then press and hold
ESC + Q on the keyboard until the red light blinks to initiate
automatic code alignment and lock.
FCC Warning:
When the receiver is connected, consult the dealer or an
experienced radio/TV technician for help. To maintain compliance
with FCC’s RF Exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20 cm between the
radiator and your body. Use only the supplied antenna.
FAQ
Q: What should I do if my keyboard and mouse are not
working?
A: Follow the troubleshooting steps provided in the user manual
to resolve any connectivity issues. Ensure fresh batteries are
installed and the USB receiver is properly connected.
“`
If the keyboard and mouse are not working: Step 1: Unplug the USB receiver from your computer. Step 2: Remove the batteries from both the keyboard and mouse. Step 3: Install fresh batteries into the keyboard. Step 4: Insert the USB receiver into a USB port on your computer. Step 5: Turn on the switch on the keyboard then press and hold ESC + Q on the keyboard until the red light blinks to initiate automatic code alignment and lock.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver – Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna. The PC apparatus contains the FCC ID:2AVRVK902 and FCC ID:2AVRVMQ3S
25
FCC WARNING for 24″ All-in-One Desktop PC, Model: CC2400
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must acceptany interference received, inc luding interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by tumning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -. Reorient or relocate the receivimng antenna. -.Increase the separation between the equipment and receiver–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced radio/TV technic ian for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
FCC Caution for Keyboard K902 and Mouse MQ3S This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (l) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no to ccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different firom that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
The PC apparatus contains the keyboard FCC ID:2AVRVK902 and mouse FCC ID:2AVRVMQ3S
Documents / Resources
 | CORE INNOVATIONS CC2400 Wireless Optical Mouse Keyboard [pdf] User Manual MQ3S, K902, CC2400 Wireless Optical Mouse Keyboard, CC2400, Wireless Optical Mouse Keyboard, Optical Mouse Keyboard, Mouse Keyboard |