CDACCDR Hoffman Drive Access Door for Concept HMI Enclosure
“
Product Information
Specifications:
- Article Number: 15286
- Height: 13.15in
- Width: 4.61in
- Depth: 0.56in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Light Gray
- Color Code: RAL 7035
- Thickness: 16ga
- Weight: 1.9lb
Product Usage Instructions:
Installation:
The drive access door is designed to be installed on enclosures
to provide access to internal disk drives. Follow these steps for
installation:
- Ensure the enclosure meets the requirements for installing the
drive door. - Use the installation template provided to mark the drilling
points on the enclosure. - Securely attach the drive door using the included
hardware. - Make sure the key-locking latch is properly engaged for
security.
Usage:
Once installed, the drive access door allows easy access to
internal disk drives within the enclosure. Follow these guidelines
for proper usage:
- Use the key-locking latch to secure and protect the internal
components. - Ensure the door is closed securely after accessing the disk
drives. - Do not force the door open or closed to avoid damage.
FAQ
Q: Can the drive access door be used on enclosures deeper than
120mm?
A: No, the drive access door cannot be used on enclosures deeper
than 120mm.
Q: What should I do if the key-locking latch malfunctions?
A: If the key-locking latch malfunctions, contact nVent customer
service for assistance and refrain from using the drive access door
until the issue is resolved.
“`
We connect and protect
Drive Access Door for Concept HMI Enclosure, 13.15×4.61×0.56, Lt Gray, Steel
CATALOG NUMBER
CDACCDR
Drive door can be installed only on enclosures to access internal disk drives. Key-locking latch is included. Maintains NEMA Type 12 rating.
FEATURES
Installation template and hardware are included Cannot be used on 120-mm deep enclosures Hinges have RAL 9005 black polyester powder paint finish
PRODUCT ATTRIBUTES
Article Number: 15286 Height: 13.15in Width: 4.61in Depth: 0.56in Material: Mild Steel Finish: Powder Coated Color: Light Gray Color Code: RAL 7035 Thickness: 16ga Weight: 1.9lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper
installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN
ILSCO
SCHROFF
TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
| nVent.com/HOFFMAN 2
Documents / Resources
 |
nVent CDACCDR Hoffman Drive Access Door for Concept HMI Enclosure [pdf] Owner's Manual CDACCDR Hoffman Drive Access Door for Concept HMI Enclosure, CDACCDR, Hoffman Drive Access Door for Concept HMI Enclosure, Access Door for Concept HMI Enclosure, Concept HMI Enclosure, HMI Enclosure |