CONAIR HS7 2-Inch Hair Roller/Hot Roller Instructions

Volume & Lift

Extra-Long 2-Inch Hair Rollers
2-Minute Heat-Up

CONAIR HS7 2-Inch Hair Roller Hot Roller

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

inFiniti PRO

Instruction & Styling Guide

Model HS7

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER

DANGER ­- To reduce the risk of electrocution:

  1. Always unplug this appliance immediately after using.
  2. Do not use while bathing or in the shower.
  3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
  4. Do not place in or drop into water or other liquids.
  5. Do not reach for an appliance that has fallen into water. Unplug immediately.

WARNING ­- To reduce the risk of burns, electrocution, fire, or injury to persons:

  1. An appliance should never be left unattended when plugged in.
  2. This appliance should not be used by, on, or near children or individuals with certain disabilities.
  3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Conair.
  4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
  5. Keep the cord away from heated surfaces.
  6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and other debris.
  7. Never use while sleeping.
  8. Never drop or insert any object into any opening or housing.
  9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  10. Do not touch the bars that hold the rollers. They are hot.
  11. Use hairsetter on a level surface.
  12. The cord can be wrapped around the stand for storage. Do not wrap the cord around any other parts of the appliance.
  13. Do not use with a voltage converter.
  14. Do not use with an extension cord.
  15. Be sure dual-voltage selector is in correct voltage position before operating. Before plugging in, read the information about dual voltage contained in the Operating Instructions section of this manual.
  16. This appliance was set at the factory to operate at 120 volts. Refer to Operating Instructions section of this manual for conversion to 240 volts operation.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

How to operate your hairsetter
  1. Place hairsetter on a firm, flat surface. With the pouch closed, plug cord into outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
  2. Never leave your hairsetter plugged in and unattended. Always unplug the hairsetter when not in use. Allow the hairsetter to cool down after use. Store unit in a safe place.
  3. When using the hairsetter, your hair should be clean and dry (or slightly damp), never wet.

For use in the U.S.A., the voltage selector switch should be placed in the 120V position. For use in several countries overseas, the voltage selector may need to be placed in the 240V position. Confirm the voltage available at each overseas location before using the appliance. For connection to a 240 volt supply, use an attachment plug adapter of the proper configuration for the power supply receptacle. Adjust your setter to the higher voltage by changing the switch position, located on the bottom of the back of the unit.

HOW TO STYLE YOUR HAIR

CONAIR HS7 - HOW TO STYLE YOUR HAIR

  1. Place ends of hair on roller and wind toward scalp. Roll hair up firmly. Open 4-prong clip, position on roller, and gently slide the clip toward the scalp for a firm hold. Do not place clip in roller slit.
  2. The results are regulated by the temperature and the length of time the roller is left in your hair.
  3. Leave rollers in hair for 10 minutes or until rollers are cool before removing.
  4. Removing roller: When roller cools, hold roller in one hand and remove clip with other. Then gently remove roller from hair (do not pull) and let hair bounce back after roller has been completely removed. Let cool for one minute and then style your hair. These hot rollers are 2 inches in diameter, which help smooth and add volume to your hair. The length of the roller is 30% longer than traditional rollers. This makes the rollers able to accommodate more hair.

IMPORTANT: After using the hairsetter several times, you will find the best timing for the length and texture of your hair and for the result you desire.

Jumbo rollers create smooth, sleek lines for softer, sophisticated hair styles and also add volume.

CONAIR HS7 - HOW TO STYLE YOUR HAIR 2

  1. Aluminum Heating Core
  2. 4-Prong Clip
  3. Soft Flocking Layer
STYLING TIPS

For maximum results, use one or two rollers on the top front layer of your hair. Use the remaining rollers on the sides and back of the head. The hair should be taken in equal sections and rolled under, toward your neck. After approximately 10 minutes the rollers can be removed. Let hair cool for one minute and then style.

VOLUME & LIFT
SIX 2-INCH ROLLER HAIRSETTER IN A POUCH

CONAIR HS7 - Jumbo Rollers  Six 2-inch diameter Jumbo Rollers

CONAIR HS7 - 4-Prong Clips  Six 4-Prong Clips

REPLACEMENT PARTS

Model         Description           Price
RPPC-8      Six 4-Prong Clips     $4.99
RP3HS7     3 Jumbo Rollers       $8.99

Please add postage and handling to all orders. Postage and handling are as follows: Any order up to $10.00 ­ add $1.00 to order. Any order from $10.01 and over ­ add $1.50 to order.

Name: _______________________________________

Address: _____________________________________

City: _______________State: __________ ZIP: ______

Daytime Phone: (____)___________________________

Note: Prices subject to change without notice. When ordering outside continental U.S.A., consumer must include cost for airmail and parcel post. Allow 4 to 6 weeks for delivery. Outside U.S.A., payments must be drawn on U.S. banks, in U.S. dollars only.

Please mail to:
Conair Corporation
150 Milford Road
East Windsor, NJ 08520

GETTING TO KNOW YOUR HAIRSETTER
  • Six 2-inch Diameter Long-Length Flocked Rollers
  • Six 4-Prong Clips
  • Dual Voltage

CONAIR HS7 - FEATURES

  1. Flocked Rollers

CONAIR HS7 - 4-Prong Clips

Six 4-Prong Clips

MAINTENANCE

Your hairsetter is designed for household use and is virtually maintenance free. This product represents the highest standards of workmanship and engineering research.

If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the metal rails with a damp cloth. (Occasionally you may want to clean the rollers. Use a damp cloth and mild detergent or soap.) If any abnormal condition occurs, unplug the hairsetter, allow it to cool, and return it to an authorized service representative for repair.

STORAGE

Allow hairsetter to cool. Handle cord carefully for longer life; avoid jerking or straining at plug connections. Place hairsetter out of reach of children in a safe, dry location.

WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER

CONAIR HS7 - UNPLUG

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES
LIMITED THREE-YEAR WARRANTY
(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 36 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Please register this product at:
www.conair.com/registration

Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

©2016 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307

16PH017346

IB-14019

Documents / Resources

CONAIR HS7 2-Inch Hair Roller/Hot Roller [pdf] Instructions
HS7, 2-Inch Hair Roller, 2-Inch Hot Roller

Leave a comment

Your email address will not be published.