FGS-MEXP-E-ABF-NC Bracket Restraint Kit
“
Product Specifications:
- Brand: Commscope, Inc.
- Model: FGS
- Size: A2 1.000
- Color: Yellow/Black
Product Usage Instructions:
- Check the component list to ensure all parts are available in
the kit. - Place the fiber retaining brackets on the express exit by
aligning raised tab with the cutout on the express exit and
rotating towards the express exit until snapped into place
(optional). - Insert the blank removable previously installed.
- Place the express exit 4×4 on the straight section as
shown. - Lift one end of the express exit 4×4 and install quick knobs
into T-slot, then lower the express exit onto the straight section.
Repeat for the other side. Rotate quick knobs clockwise until
T-bolt flanges extend into T-slot. Hand-tighten quick knobs
loosely. - Attach extension bracket to express exit using 6-32 x .250 long
screws with a torque of 9 lb-in (for 4×6 and 4×12 straight sections
only). Rotate quick knobs clockwise until T-bolt flanges extend
into T-slot. Tighten all quick knobs completely.
Frequently Asked Questions (FAQ):
Q: Are the quick knobs necessary for installation?
A: Yes, the quick knobs are essential for securing the express
exit to the straight section.
Q: Can I remove the express exit from the straight section
after installing it?
A: It is not recommended to remove the express exit from the
straight section while the quick knobs are installed, as they may
fall out.
“`
1
2
3
4
5
6
7
8
9
10
REVISIONS
REV
CMO
DATE APPROVED
P
40216340CMO 18-MAR-2025 RAT
A
R
40220366CMO 27-MAY-2025 FS A
B
C
D
E
4.07 REF F
G 4X4 STRAIGHT SECTION REF
BRACKET, EXPRESS EXIT 2X4
H
EXPRESS EXIT
ON TROUGH VIEW
SCALE 0.450
SAP-ENTERPRISE-A2-2016-3RD.FRM
1
2
B
15.930 REF 4.837 REF
C
4.000 REF
ISO VIEW
SCALE 0.450
1 COVER, EXPRESS EXIT 4X4
D
COVER EXTENSION 4X4 FLIP COVER
FGS-MEXC-E-A (NOT INCLUDED IN KIT)
E
EXPRESS EXIT 4X4
7.73 REF
7.89 REF
3
4
5
F
FGSB-MEXP-E-ABF-NC
BLACK
FLIP COVER OPEN VIEW
SCALE 0.450
FGS-MEXP-E-ABF-NC 1 FGSB-MEXP-E-A/B/F 1 FGS-MEXP-E-A/B/F
YELLOW BLACK G YELLOW
CATALOG NO.
COLOR
COMMSCOPE, INC.
DRAFTER
GILBERTO VILLA
TITLE
KIT, BRACKET, RESTRAINING, L/R, FGS
ENGINEER
RUBEN ARVILLA
SIZE
SCALE
DOCUMENT NO.
H
A2 1.000 1147583_ADC
CUSTOMER DRAWING
REVISION SHEET
R
1 OF 5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
BRACKET, FIBER RETAINING RIGHT
A
A
BRACKET, FIBER RETAINING LEFT
INSERT, BLANK 3
B
B
C EXPRESS EXIT 4X4
D
E
INSTALLATION INSTRUCTIONS:
1 CHECK COMPONENT LIST TO SEE IF COVER IS AVAILABLE ON THIS KIT.
2. PLACE FIBER RETAINING BRACKETS ON EXPRESS EXIT BY ALIGNING RAISED TAB
ON BRACKET WITH CUT OUT ON EXPRESS EXIT AND ROTATE TOWARDS EXPRESS EXIT
F
UNTIL SNAPPED INTO PLACE. (OPTIONAL)
3 INSERT BLANK REMOVABLE PREVIOUSLY INSTALLED.
4. PLACE EXPRESS EXIT 4X4 ON STRAIGHT SECTION AS SHOWN.
5. LIFT ONE END OF EXPRESS EXIT 4X4 AND INSTALL QUICK KNOBS INTO T-SLOT, LOWER EXPRESS EXIT ONTO STRAIGHT SECTION. REPEAT FOR OTHER SIDE. ROTATE QUICK KNOBS CLOCKWISE SUCH THAT T-BOLT FLANGES EXTEND INTO T-SLOT. LOOSELY HAND TIGHTEN QUICK KNOBS. SEE DETAIL A.
G *WARNING: IF EXPRESS EXIT IS REMOVED FROM STRAIGHT SECTION WHILE QUICK KNOBS ARE INSTALLED, QUICK KNOBS WILL FALL OUT.
6 ATTACH EXTENSION BRACKET TO EXPRESS EXIT USING 6-32 X .250 LONG SCREWS
WITH TORQUE OF 9 lb-in. (4X6 AND 4X12 STRAIGHT SECTION ONLY)
7. INSERT QUICK KNOBS THROUGH BRACKET, ROTATE 90° AND INTO T-SLOT IN
STRAIGHT SECTION WILE INSERTING BRACKET INTO EXPRESS EXIT SLOT.
H
ROTATE QUICK KNOBS CLOCKWISE SUCH THAT T-BOLT FLANGES EXTEND INTO T-SLOT. SEE DETAIL A.
8. TIGHTEN (4) QUICK KNOBS COMPLETELY.
1
2
3
4
SAP-ENTERPRISE-A2-2016-3RD.FRM
C
D
INSERT VIEW
WITH SNAP ON FIBER RETAINING BRACKETS
SCALE 0.500 E
COMPONENT LIST
DESCRIPTION
QTY
EXPRESS EXIT 4X4
1
1
COVER, EXPRESS EXIT 2X4
1
F
BRACKET, RETAINING FIBER RIGHT
1
BRACKET, RETAINING FIBER LEFT
1
INSERT, BLANK REMOVABLE
1
BRACKET, EXPRESS EXIT 4X4
1
BRACKET, EXTENSION 6″ & 12″ FGS
1
QUICK KNOB ASSEMBLY
4
SCREW, 6-32 X .250
4
G
COMMSCOPE, INC.
DRAFTER
GILBERTO VILLA
TITLE
KIT, BRACKET, RESTRAINING, L/R, FGS
ENGINEER
RUBEN ARVILLA
SIZE
SCALE
DOCUMENT NO.
H
A2 1.000 1147583_ADC
CUSTOMER DRAWING
REVISION SHEET
R
2 OF 5
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
A EXPRESS EXIT 4X4
EXPRESS EXIT 4X4 A
B
B
C
4X6 STRAIGHT SECTION REF D
C
4X4 STRAIGHT SECTION REF
D
E
BRACKET, EXTENSION
F
QUICK KNOB
ASSEMBLY (4)
BRACKET, EXPRESS EXIIT 4X4
SCREW, 6-32 X .250 (4) 6
T-SLOT
STRAIGHT SECTION REF
EXPRESS EXIT 4X4
BRACKET
G
INSTALLATION
4X6 STRAIGHT SECTION
SCALE 0.400
QUICK KNOB ASSEMBLY
QUICK KNOB INSTALLATION VIEW
SCALE 1.900
H
1
2
3
4
5
6
7
SAP-ENTERPRISE-A2-2016-3RD.FRM
BRACKET, EXPRESS EXIT 4X4
E
F QUICK KNOB ASSEMBLY (4)
EXPRESS EXIT 4X4
INSTALLATION
4X4 STRAIGHT SECTION
SCALE 0.500
G
DRAFTER
GILBERTO VILLA
ENGINEER
RUBEN ARVILLA
8
COMMSCOPE, INC.
TITLE
KIT, BRACKET, RESTRAINING, L/R, FGS
SIZE
SCALE
DOCUMENT NO.
H
A2 1.000 1147583_ADC
CUSTOMER DRAWING
REVISION SHEET
R
3 OF 5
9
10
1 A B C D E
2
3
EXPRESS EXIT 4X4
4
5
6
7
8
9
10
1 COVER EXPRESS EXIT 4X4
A 4X12 FLIP COVER
FGS-MEXC-E-F REF
4X6 FLIP COVER
B
FGS-MEXC-E-B
REF
4X4 FLIP COVER FGS-MEXC-E-A REF
C
D
EXPRESS EXIT 4X4
COVER OFF VIEW
FLIP COVERS NOT INCLUDED
IN KIT
SCALE 0.400
E
F
4X12 STRAIGHT SECTION REF
G BRACKET, EXTENSION
QUICK KNOB ASSEMBLY (4) H
SAP-ENTERPRISE-A2-2016-3RD.FRM
1
2
BRACKET, EXPRESS EXIT 4X4
SCREW, 6-32 X .250 (4) 6
EXPRESS EXIT 4X4 INSTALLATION
4X12 STRAIGHT SECTION
SCALE 0.400
3
4
5
6
F
G
COMMSCOPE, INC.
DRAFTER
GILBERTO VILLA
TITLE
KIT, BRACKET, RESTRAINING, L/R, FGS
ENGINEER
RUBEN ARVILLA
SIZE
SCALE
DOCUMENT NO.
H
A2 1.000 1147583_ADC
CUSTOMER DRAWING
REVISION SHEET
R
4 OF 5
7
8
9
10
1
2
3
4
5
6
7
8
9
10
EXPRESS EXIT 4X4
A
A
B
C EXPRESS EXIT 4X4
D
E
F
4X18 STRAIGHT SECTION REF
G
EXPRESS EXIT 4X4 INSTALLATION
4X18 STRAIGHT SECTION
SCALE 0.320 H
1
2
3
SAP-ENTERPRISE-A2-2016-3RD.FRM
B
4X18 STRAIGHT SECTION REF
C
EXPRESS EXIT 4X4 INSTALLATION
4X24 STRAIGHT SECTION
SCALE 0.320
BRACKET, EXPRESS EXIT 4X4 D
E QUICK KNOB ASSEMBLY
BRACKET, EXPRESS EXIT 4X4
QUICK KNOB ASSEMBLY
4
5
6
F
G
COMMSCOPE, INC.
DRAFTER
GILBERTO VILLA
ENGINEER
RUBEN ARVILLA
TITLE
,
KIT, BRACKET, RESTRAINING, L/R, FGS
SIZE
SCALE
DOCUMENT NO.
H
A2 1.000 1147583_ADC
CUSTOMER DRAWING
REVISION SHEET
R
5 OF 5
7
8
9
10
Documents / Resources
 | COMMSCOPE FGS-MEXP-E-ABF-NC Bracket Restraint Kit [pdf] Installation Guide FGS-MEXP-E-ABF-NC, FGSB-MEXP-E-A-B-F, FGS-MEXP-E-ABF-NC Bracket Restraint Kit, FGS-MEXP-E-ABF-NC, Bracket Restraint Kit, Restraint Kit, Kit |