CODACE ‎ALL-12-21 Smart Invisible Cabinet Lock

Technology Creates A Better Life

Parameter

• Power: I-5V AAA battery x 4
• Card: 250
• APP: Tuya Bluetooth
• Battery life: >3000 use
• Power consumption:
  • Bluetooth off: <40uA
  • Buetooth on; 70uA

Structure

1. Setting button
2. Battery cover

Size

Operation

(It’s suggested to mainly use the Tuya APP)

• Reset the lock
  After you long-press the setting button, there will be 2 short beeps first. And then there are 5 short beeps in 55. When it stops beeping. Release the setting button, and now there’s a tone beep.
  After Is there’s another long beep again. Then the device is successfully initialized.
• Add card
  • Press the setting button. There are 2 short beeps first. When it beeps the 3rd time, please release the button immediately, then there is a “dorui” sound, now you may swipe the card.
  • Successful: There is a long beep, and then a “dorui” sound again, now you are able to add more cards
  • Failure: There are 5 short beeps, and then there is a “dorui” sound for you to swipe card.
  • Note: If there’s no operation within IOS. it will exit the adding process. Or within IOS, you may short-press the settings button to exit, there will be 2 short beeps,
• Turn on Bluetooth
  At factory default mode, swipe any card and there are 2 short beeps first, please do not remove the card until there is a long beep. NOW the Bluetooth function is enabled, you may use the app to add the lock.
  • If the lock has already been bound with the APP, you don’t need to enable Bluetooth again.
  • After any card is added in the device, the Bluetooth is turned on automatically and you may add the device in the APP.
    Thank you for purchasing this product!

Documents / Resources

CODACE ‎ALL-12-21 Smart Invisible Cabinet Lock [pdf] User Manual ALL-12-21 Smart Invisible Cabinet Lock, ALL-12-21, Smart Invisible Cabinet Lock, Invisible Cabinet Lock, Cabinet Lock

References

• User Manual