Cokunst 500ML Portable Biender
Please read the manual carefully before use!
Froduct Components
Installation of The Fortable Lid
Assembly of Cleaxing Brask
Insert the two small tentacles of the blue rod into the hole of the white rod.
Technical Specifications
| Model | PSB-8 |
| Capacity | 17oz |
| Recommended Max Capacity | 15oz |
| Bottle Material | PCTG Food Grade |
| Blade Material | 304 Stainless Steel |
| Motor Revolving Speed | 18000-22000rpm |
| Working Current | 12-20A |
| Working Voltage | DC7.4V |
| Battery Volume | 18650 Lithium ion battery 1500mAh |
Attention
- Please charge at least once a month, otherwise the battery will be damaged.
- Please do not use the steel ball, corrosivity cleanser or dishwasher to clean the blender, otherwise the elements will be damaged.
- Please do not put the base into the refrigerator or water, otherwise the battery will be damaged.
- This product is exclusive for juice making, not suitable for blending hard objects such as meat, nuts or beans.
- The blender can’t be disinfected by microwave or hot water above 122 deg * F otherwise the accessories will be deformed.
- Please keep the product away from children and the mentally ill.
Instructions before Use
- Please clean the blender before use.
- Please click the button once to check the power to ensure the battery is fully charged.
- Please align the “LOCK arrow” on the bottle with the power button on the base when installing the bottle and base.
- Please check the light indication instructions:
Lighting Instructions
| Blender Status | Lighting |
| Bottle not properly tightened at startup (“LOCK arrow” not aligned with power button). | Flash red and blue for 2s. |
| After spinning the bottle into the base until tightened. | |
| When spinning the bottle out of the base. | |
| Click the button once to check the power status. | Blue light is on. One blue light represents 25% power. |
| When blending. | All indicator lights will continuously flash in blue. |
| Low power while blending. | All indicator lights will flash in red. |
| Out of power while long press the button. | All indicator lights in red or off. |
| When charging. | Indicator light(s) will flash slowly at current battery level. |
| When fully charged. | All indicator lights will light up in blue. |
| Blades gets stuck. | Red light flashes quickly for 8s. |
| Battery low voltage | Red light on for 5s. |
| Auto-stop blending after 30s | Flash red and blue for 3s. |
How to Use?
Step 1
Tighten the bottle to the base until the “locking arrow” on the bottle aligns with the power button.
Step 2
Click the button to check the power. Please fully charge the blender before use.
Step 3
Remove the bottle from the base by aligning the “unlock arrow” on the bottle with the power button.
Step 4
Place the fruit inside the bottle (cutting them into small pieces, making up 20% of the capacity.
Step 5
Pour in milk or pure water (The liquid takes up 60%, fruit plus liquid can not exceed the Max line).
Step 6
Slightly tilt the blender and long press the switch button to start, then shake the blender to make sure the fruit is completely mixed with the milk or water.
Step 7
The blender will auto-stop blending after 30 seconds. Turn the blender upside down, unscrew the base, then screw on the portable lid, and enjoy it at anytime.
How to Clean?
Add 80% of water, and long press the button to clean automatically.
If the stain is strong, uncrew the lid and bottle, and clean with the included cleaning brush. (Cover the waterproof cover of the charging port before cleaning! Do not touch the blade with your hands!)
Cleaning and Maintenance
- Make sure the blades stop running before cleaning.
- Do not use dishwasher steel balls, abrasive cleaners, or corrosive liquids (such as gasoline, or acetone) to clean this products, it is recommended to use the included cleaning brush to clean the blade.
- The host part can be cleaned quickly with flowing water, please dry it in time after cleaning, do not place it in water or other liquids soaked.
- When storing, please ensure that the product is clean, dry and placed in a dry and ventilated place without direct sunlight.
Warm Tips
- To meet the shipping requirements, the blender is shipped with only 60% power, it is recommended to be fully charded before use to ensure battery life.
- It is recommended to recharge in time when the power is below 50% to ensure that the blender has enough power to work.
Safety Features
- Nothing inside for 5 seconds – Auto power-off
- Bottle and Base Separation – Auto power-off
- Battery is being charged – Auto power-off
- Auto-stop blending after 30s
- Click to stop when blending
- Gravity sensing device
- Indicator light
- No 100% power consumption
- BPA-free food-grade material
Troubleshooting
| Malfunction | Analysis | Solution |
| Not working | Low power | Click the button once to check power status. When the power is less than 25%, please charge it. |
| Bottle not properly tightened to the base | Retighten until the “LOCK arrow” on the bottle is aligned with the power button(refer to step 1 of use) | |
| Blades get stuck | Hold the blender upside down and long press the power button to turn it on, then turn it back and shake gently. | |
| Ingredients added are above the MAX line Worked many times | Remove some ingredients until below the MAX line and use as usual. | |
| Worked many times in a row | Wait 20 minutes and then use it normally. | |
| Base and bottle are separated | The blender has security protection. If the base is separated from bottle, the blades will not rotate. | |
| Operation is incorrect | One-click to check the power, long press to turn on. | |
| No charged over a month | Please charge the blender at least once a month, otherwise the battery will be easily damaged. | |
| Leakage | Ingredients added are above the MAX line | Remove some ingredients until below the MAX line and use as usual. |
| Bottle not properly tightened to the base | Retighten until the “LOCK with the power button(refer to arrow” on the bottle is aligned step 1 of use) |
If the solutions above can’t solve the problem, please scan the COKUNST after-sales QR to get help.
Scan for Online Support
Customer Support
NINGBO NINHUA INTERNATIONAL CO., LTD
ADD: No. 755 Liyuan North Road, Room 535, Haishu District, 315000, Ningbo, Zhejiang
After-Sale Service:
cokunstaftersale@gmail.com
www.facebook.com/COKUNST.Official
www.instagram.com/cokunst.official
Documents / Resources
 | Cokunst 500ML Portable Biender [pdf] User Manual 500ML, 500ML Portable Biender, 500ML, Portable Biender, Biender |