10357 Light Kit For Shelby Cobra
Product Information
Specifications
- Product: Light Kit for Shelby Cobra 427 S/C 10357 (Classic
version) - Manufacturer: LeLightGo
- Contact: support@LeLightGo.com
Product Usage Instructions
1. Testing Lights
Before the installation process, it is important to test each
light included in the kit. This ensures that all components are
functioning properly.
2. Installation Process
Follow these steps to install the light kit on your Shelby Cobra
427 S/C 10357:
- Prepare the necessary tools and ensure the vehicle is parked on
a flat surface. - Refer to the user manual for specific installation instructions
based on the model of your car. - Carefully connect each light according to the provided wiring
diagram. - Securely mount the lights in the designated locations on your
vehicle. - Test the lights again after installation to verify proper
functioning.
3. Troubleshooting and Support
If you encounter any problems during the installation process or
have questions about using the light kit, please contact LeLightGo
at support@LeLightGo.com for assistance.
Frequently Asked Questions (FAQ)
Q: What should I do if a light is not working after
installation?
A: Check the connections and wiring to ensure they are properly
connected. If the issue persists, contact LeLightGo for further
assistance.
Q: Can I install this light kit on a different vehicle
model?
A: The light kit is specifically designed for the Shelby Cobra
427 S/C 10357 (Classic version). Installing it on a different model
may require modifications and compatibility checks.
Light Kit For
Shelby Cobra 427 S/C 10357 (Classic version)
Before the installation process, please test each light. If you encounter problems or have questions, please contact us at
support@LeLightGo.com
Documents / Resources
 |
LeLightGo 10357 Light Kit For Shelby Cobra [pdf] Installation Guide 10357 Light Kit For Shelby Cobra, 10357, Light Kit For Shelby Cobra, For Shelby Cobra, Shelby Cobra |