L'app LeKKeR Bafang Go Plus

Specificazioni

• Minimum Requirements: Android 8.0 or higher / iOS 9.0 or higher

Downloading the Bafang Go+ App
Open the installed Bafang Go+ app and carefully go through the introduction screens. Make sure to allow the Bafang Go+ app access to your location for navigation purposes and activate your Bluetooth for later connection with your eBike.

Homescreen
Explore the features available on the homescreen of the Bafang Go+ app.

Connecting Your eBike
Follow the instructions to connect your eBike to the app via Bluetooth. Ensure your phone is within 1m of the bike for optimal connection.

Navigazione
A funzione di navigazione in l'app vi permette di:

• View a strada per a vostra destinazione
• Verificate a durata di u viaghju, a velocità di a bicicletta è u modu di guida
• Monitorà a frequenza cardiaca è a percentuale di batteria restantetage
• View statu di l'illuminazione di sicurezza

You can pause and modify your trip at any time. Remember to focus on safe biking practices and avoid using your phone while riding.

Download the Bafang Go+ app.

• Open the installed Bafang Go+ app and carefully go through the introduction screens. Make sure to allow the Bafang Go+ app access to your location for navigation purposes, as well as activate your Bluetooth, which will be required later on to connect with your eBike.
• Requisiti minimi:
  Android 8.0 or higher / iOS 9.0 or higher.

Homescreen

The homescreen contains the following information:-

1. Battery status: Shows an estimate of the available battery percentage.
2. Range: Shows an estimate of the range you could travel with the remaining battery life.
3. ODO: Displays the total distance travelled by the connected eBike.
4. Modi di equitazione
5. Bluetooth status: Shows the status of connectivity, whether or not an eBike is connected to your profile per avà.
6. Lighting: Shows whether or not the safety lights of your bike are turned on or off.
7. Tab bar: Allows for quick navigation between the homepage, navigation page, activities, and settings sections of the app.

 

Connecting your eBike

1. To connect your eBike, go to Settings and click on the eBike icon.
2. On the following screen, select the Add vehicle option by clicking on the “+” icon at the top right. The screen seen on the right will appear.
3. Turn your eBike on so that it becomes discoverable by your phone through Bluetooth.
4. Once the eBike is turned on, click the “Bluetooth binding” button, a nd your eBike will appear as available to connect.
5. Select your eBike, allow it to be remembered by the app, and customise its name and properties.

Navigazione

Integrated navigation in the Bafang Go+ app is a new feature. At the navigation page, you can track the following:

1. Navigation: the interface shows you the route you should follow to arrive at a destination pre-defined by you
2. Duration of the trip in distance and time
3. Biking speed and riding mode
4. Monitoraghju di freccia di u core
5. Batteria restante per centutage
6. Safety lighting status

You can pause and change the trip at any time.

Assicuratevi di guidà in modu sicuru è attentivu è ùn scrive micca nant'à u vostru telefunu mentre andate in bicicletta.

FAQ

Some questions that we have already received with proposed solutions, as well as some general help:

Q. The app crashes or doesn’t open at all. Make sure it’s up to date.

• Some Samsung phones have extra security features enabled by default that may prevent the app from working.

D. A mo bicicletta ùn si vede micca quandu pruvu à cunnette mi via Bluetooth

• Ensure you are using your phone near the bike; less than 1m is ideal.
• Check the app’s permissions (Bluetooth and location)

Documenti / Risorse

L'app LeKKeR Bafang Go Plus [pdfManuale d'usu Applicazione Bafang Go Plus, Applicazione

Referenze

• Manuale d'usu