TELLUR FCC10 (TLL151291)

Manuale d'usu di u caricatore di vittura TELLUR FCC10

Model: FCC10 (TLL151291)

1. Introduzione

Thank you for choosing the TELLUR FCC10 Car Charger. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

The TELLUR FCC10 is a high-performance car charger designed to provide rapid charging for your cellular phones and other compatible devices. Featuring both Power Delivery (PD20W) and Quick Charge 3.0 (QC3.0) ports, it allows for simultaneous fast charging of two devices. Its intelligent design includes multiple protection mechanisms to ensure the safety of your devices.

2. Produttu Finituview

The TELLUR FCC10 Car Charger is compact and designed for convenience. It features two distinct charging ports for versatile compatibility.

TELLUR FCC10 Car Charger front view

Figura 2.1: Fronte view of the TELLUR FCC10 Car Charger, showing the USB-C (PD) and USB-A (QC3.0) ports.

TELLUR FCC10 Car Charger angled view

Figura 2.2: Angulu view of the TELLUR FCC10 Car Charger, highlighting its compact design and textured finish.

Funzioni chjave:

  • Doppiu porti di carica: Equipped with one USB-C Power Delivery (PD20W) port and one USB-A Quick Charge 3.0 (QC3.0) port.
  • Carica rapida: Delivers up to 38W total output, enabling 4x faster charging than standard chargers.
  • Intelligent Adaptation: Automatically adjusts input current to optimize charging for connected devices.
  • Sistema di prutezzione multipla: Built-in safeguards against overcurrent, short circuit, overvoltage, è surriscaldamentu.
  • Compatibilità Universale: Compatible with a wide range of cellular phones and other USB-powered devices.
TELLUR FCC10 Car Charger with internal protection diagram

Figura 2.3: Diagram illustrating the internal protection features of the TELLUR FCC10 Car Charger, including over-current, over-voltage, over-temp, and over-charge protection, along with a Smart-IC chip.

3. Setup

Setting up your TELLUR FCC10 Car Charger is straightforward. Follow these steps to begin charging your devices.

  1. Locate Your Vehicle's Cigarette Lighter Socket: This is typically found in the dashboard or center console of your car.
  2. Inserite u Caricatore: Firmly insert the TELLUR FCC10 Car Charger into the cigarette lighter socket. Ensure it is fully seated for a stable connection.
  3. Verificate u putere: Once inserted, the charger may have a small LED indicator that illuminates, signifying it is powered on and ready for use.

Nota: Ensure your vehicle's engine is running or the ignition is in the accessory position for the cigarette lighter socket to provide power.

4. Operating Instructions

Using the TELLUR FCC10 Car Charger to charge your devices is simple.

  1. Cunnette u vostru Dispositivu:
    • For devices supporting Power Delivery (PD), use a USB-C to USB-C cable or USB-C to Lightning cable and connect it to the USB-C port on the charger.
    • For devices supporting Quick Charge (QC3.0) or standard USB charging, use a USB-A cable and connect it to the USB-A port on the charger.
  2. Cumincià a carica: Once connected, your device should automatically begin charging. The charger's intelligent technology will adapt the output to suit your device's charging requirements.
  3. Carica simultanea: You can charge two devices simultaneously using both the USB-C and USB-A ports.
TELLUR FCC10 Car Charger with two devices charging

Figura 4.1: The TELLUR FCC10 Car Charger simultaneously charging two devices, demonstrating its dual-port capability.

TELLUR FCC10 Car Charger showing PD and QC3.0 outputs

Figura 4.2: Primu pianu view of the TELLUR FCC10 Car Charger ports, labeling the PD 20W Output (USB-C) and QC 3.0 Output (USB-A).

Considerazioni impurtanti:

  • Use high-quality charging cables compatible with your devices and the charger's fast charging standards (PD/QC3.0) for optimal performance.
  • The charging speed may vary depending on your device's battery level, cable quality, and environmental factors.
  • Unplug the charger from the car's socket when not in use for extended periods.

5. Mantenimentu

Proper maintenance will ensure the longevity and optimal performance of your TELLUR FCC10 Car Charger.

  • Pulizia: Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or abrasive materials.
  • Conservazione: Conservate u caricatore in un locu frescu è asciuttu, luntanu da a luce diretta di u sole è da temperature estreme quandu ùn hè micca in usu.
  • Evite i danni fisichi: Do not drop, disassemble, or expose the charger to excessive force or moisture.
  • Inspeccione i cunnessi: Periodically check the charger's contacts and your car's cigarette lighter socket for any debris or corrosion that might affect connectivity.

6. Risoluzione di prublemi

If you encounter issues with your TELLUR FCC10 Car Charger, refer to the following common problems and solutions:

PrublemuCausa PossibileSoluzione
Charger not powering on/no indicator light.
  • Cunnessione allentata in a presa di a vittura.
  • Vehicle's ignition not on.
  • Blown fuse in vehicle's cigarette lighter socket.
  • Caricatore difettu.
  • Assicuratevi chì u caricatore sia inseritu fermamente.
  • Turn on vehicle's ignition or engine.
  • Check and replace vehicle's fuse if necessary (consult car manual).
  • Cuntattate l'assistenza clienti se altre suluzioni fiascanu.
L'apparechju ùn si carica micca o si carica lentamente.
  • Faulty or incompatible charging cable.
  • Dispositivu micca cumpatibile cù a carica rapida.
  • Dirty charging port on device or charger.
  • Prutezzione di surriscaldamentu attivata.
  • Try a different, known-good cable.
  • Ensure your device supports PD or QC3.0 for fast charging.
  • Clean ports gently with a non-conductive tool.
  • Unplug charger and device, allow to cool, then retry.
U caricatore si riscalda eccessivamente.
  • Overload (charging too many high-power devices).
  • Pobre ventilazione.
  • Curpa interna.
  • Reduce the number of devices being charged or use lower power devices.
  • Ensure charger is not obstructed.
  • Interrompe l'usu è cuntattate l'assistenza clienti.

If the problem persists after trying these solutions, please contact TELLUR customer support.

7. Specificazioni

FeatureDetail
MarcaTELLUR
Nome di mudelluFCC10
Numero di mudelluTLL151291
Input Voltage12 Volts
Potenza totale di outputtage38 W (max)
Uscita USB-C (PD)Fornitura di energia 20W
USB-A (QC) OutputCarica rapida 3.0
Ampera6 Amps
Numero di Porti2 (1x USB-C, 1x USB-A)
Dispositivi compatiblesCellular Phones (supports major manufacturers' fast charging standards: Samsung, Apple, Huawei)
Funzioni spicialiFast Charging, Integrated Smart Technology, Multi-Protection (Overcurrent, Short Circuit, Overvoltage, Overheating)
Pesu di l'articulu23 g
Dimensioni di u pacchettu17.7 x 8.5 x 3.4 cm

8. Garanzia è Support

TELLUR products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official TELLUR websitu.

Cumpunenti inclusi: 1 x Fast car charger FCC10, 1 x Manual

For further assistance, please contact TELLUR customer service through their official channels.

© 2024 TELLUR. Tutti i diritti riservati.