Introduzione
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Informazioni di sicurezza
- ATTENZIONE: Risicu di scossa elettrica. Scollegate l'alimentazione à u fusibile o à l'interruttore automaticu prima di l'installazione o di a manutenzione.
- Stu pruduttu deve esse stallatu in cunfurmità cù u codice di installazione applicabile da una persona familiarizata cù a custruzzione è u funziunamentu di u pruduttu è i periculi implicati.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Do not connect to a dimmer switch.
- Ùn fighjate micca direttamente in a fonte di luce LED.
- Assicuratevi chì tutte e cunnessione sò assicurate è insulate bè.
- Gamma di temperatura di funziunamentu: da -20 °C à 40 °C (da -4 °F à 104 °F).
Cuntenutu di u pacchettu
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Ferramenta di muntatura (viti, dadi per fili)
- Manuale d'istruzzioni
Funzioni di u produttu
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Alta luminosità: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Rilevazione di muvimentu: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Disegnu aghjustabile: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Custruzzione durabile: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Impermeabile: Waterproof rating ensures resilience against rain, sleet, or snow.
- Certificatu ETL: Meets safety and quality standards.
Image: Front view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Istituisci
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Preparate per a stallazione:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ensure the mounting surface is stable and can support the fixture's weight.
- Muntà l'attrezzatura:
- Attaccà u supportu di muntatura à a scatula di junction usendu i viti furniti.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Ajustà i capi di luce è u sensore:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Ripristina l'energia: Riattivate u putere à u circuit breaker.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Istruzzioni di funziunamentu
The motion sensor has adjustable settings to customize its operation.
- Impostazione di TIME: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Accensione iniziale: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Mantenimentu
- Pulizia: Pulite l'attrezzatura cun un soffiu, damp pannu. Ùn aduprate micca detergenti abrasivi o solventi. Assicuratevi chì l'alimentazione sia spenta prima di pulisce.
- Ispezione: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED: The integrated LED bulbs are designed for long life and are not user-replaceable.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| A luce ferma continuamente. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| La luce tremola o si attenua. | Cunnessione di fili sciolta; fluttuazioni di putenza. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| A portata di u sensore di muvimentu hè scarsa. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specificazioni
| Numero di mudellu | SM-4000-180-2H |
| Marca | Amazon Basics |
| Wattage | 40 W |
| Luminosità | 4000 lumens |
| Temperature di culore | 5000K di luce di ghjornu |
| Angulu di rilevazione | Finu à 180 ° |
| Gamma di rilevazione | Finu à 49 piedi |
| Voltage | 120 Volts |
| Materiale | Alluminiu, Plastica |
| Livellu di resistenza à l'acqua | Impermeabile |
| Certificazioni | Certificatu ETL |
| Dimensioni di l'articulu (L x W x H) | 14.96" x 6.3" x 5.12" |
| Pesu di l'articulu | 1.9 liri |
Garanzia è Supportu
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.