DCM1e Digital Mixer
“
Product Information
Specifications:
- Product Name: DCM1e Cloud Electronics Digital Mixer
- Manufacturer: Cloud Electronics Limited
- Model: DCM1e
Product Usage Instructions:
Prerequisites:
- Ensure you have physical access to the DCM1e unit.
- Make sure the DCM1e is connected to the same local network as
your macOS device. - Verify that your macOS device has Terminal access.
Step-by-Step Procedure:
- Locate the MAC Address: Find the MAC address
sticker on the left side panel of the DCM1e unit. The MAC address
will be in the format: 00:1A:2B:3C:4D:5E. - Open Terminal: On your Mac, open Terminal by
pressing Command () + Space to open Spotlight, then type Terminal
and press Enter. - Scan the Network: In Terminal, type: arp -a
and press Enter to list all devices your Mac can see on the network
along with their IP addresses and MAC addresses. - Match the MAC Address: Look through the list
for the MAC address found on the DCM1e sticker. It should be in the
format: device-name (192.168.x.xxx) at 00:1a:2b:3c:4d:5e. The
number in parentheses is the IP address. - Access the DCM1e Web Interface: Copy the IP
address you found (e.g., 192.168.1.45) and paste it into your
browser’s address bar (http://192.168.1.45). Press Enter to load
the DCM1e configuration page.
FAQ
Q: What should I do if I cannot find the MAC address sticker on
my DCM1e unit?
A: If you cannot locate the MAC address
sticker, please contact Cloud Electronics Limited for further
assistance.
Q: Can I access the DCM1e Web Interface from a Windows
system?
A: The provided instructions are specific to
macOS systems. For accessing the DCM1e Web Interface from a Windows
system, refer to the user manual or contact technical support.
“`
Technical Note
TN-035
DCM1e MAC IP Discovery
Access your DCM1e on MAC
1. Overview This document explains how to identify the IP address of a DCM1e Cloud Electronics Digital Mixer from a macOS system and access its web interface using Safari, Chrome, or another browser. The procedure uses the device’s MAC address and the arp -a command in Terminal.
2. Prerequisites Before starting, ensure the following: You have physical access to the DCM1e unit. The DCM1e is connected to the same local network as your macOS device. Your macOS device has Terminal access.
3. Step-by-Step Procedure
Step 1: Locate the MAC Address Find the MAC address sticker on the left side panel if looking at the front of the DCM1e unit. The MAC address will look like: 00:1A:2B:3C:4D:5E (format: six pairs of hexadecimal digits separated by colons)
Step 2: Open Terminal On your Mac, open Terminal: Press Command () + Space to open Spotlight. Type Terminal and press Enter.
Step 3: Scan the Network In Terminal, type: arp -a Press Enter. This will list all devices your Mac can see on the network, showing their IP addresses and MAC addresses.
Step 4: Match the MAC Address Look through the list for the MAC address you found on the DCM1e sticker. You should see it in the format: device-name (192.168.x.xxx) at 00:1a:2b:3c:4d:5e The number in parentheses (192.168.x.xxx) is the IP address.
Step 5: Access the DCM1e Web Interface Copy the IP address (e.g., 192.168.1.45). Paste it into your browser’s address bar: http://192.168.1.45 Press Enter. The DCM1e configuration page should load.
140 Staniforth Road, Sheffield,
Cloud Electronics Limited
. England. Telephone:
eb:
Documents / Resources
 | Cloud DCM1e Digital Mixer [pdf] User Guide DCM1e, DCM1e Digital Mixer, DCM1e, Digital Mixer, Mixer |