CLEVAST C19 Compressed Air Duster Instruction Manual

CLEVAST logoInstruction ManualCLEVAST C19 Compressed Air DusterCompressed Air Duster

Read this manual thoroughly before using and save it for future reference

IMPORTANT SAFEGUARDS

NOTES:

  1. Because the product contains motor accessories, the motor will rotate quickly during operation, causing slight noise. This is normal, so please do not worry.
  2. The product cannot be started while charging in order to protect the battery.
    If you need to use it, you can pause the charging process and then use it.
  3. To get the maximum use time, it is recommended that the product be fully charged every time before use.
  4. To protect the life of the battery, please fully charge it and then store it if it will not be used for an extended period of time.
  5. To prevent battery damage, it is advisable to charge the product once every three months.
  6. It is normal for the product to generate some heat during operation, so there is no need to worry.
  7. Please do not hesitate to contact us if you encounter any problems with the product. We will respond to your message within 24 hours, and your satisfaction is our greatest reward.

Save this Instructions
GETTING TO KNOW YOUR COMPRESSED AIR DUSTER

  1. PRODUCT DIAGRAMCLEVAST C19 Compressed Air Duster - Diagram
  2. PACKAGE CONTENTSCLEVAST C19 Compressed Air Duster - PackageAIR DUSTER NOZZLE
    CLEVAST C19 Compressed Air Duster - DustarNozzle 1: For camera lens/jewelry/phone handset charging port and other items
    Nozzle 2; For swimming ring/beach ball/yoga ball inflation; Air blowing on barbecue charcoal
    Nozzle 3: For PVC swimming pools and inflatable beds, etc
    Nozzle 4: For blowing the dust off the computer host, keyboard, etc
    Brush nozzle 5: Clean up static or thick dust adhesions
    Tube nozzle: Clean up the dust in OA equipment or narrow spaces where tools can not reach out (used with Nozzle 1}
    HOW TO USE THE AIR DUSTER FUNCTION
    Itcan be used after installing the air nozzle.(nozzle 1-nozzle 5)CLEVAST C19 Compressed Air Duster - FunctionHOW TO USE THE PRESSURIZED AIR FOR AIR NOZZLE FOR AIR INFLATION
    The air valve must be opened for rapid air inflation.
    As shown below:CLEVAST C19 Compressed Air Duster - Function 1Release the nozzle from the nozzle hole and put it to the air outlet.
    VACUUM CLEANER NOZZLECLEVAST C19 Compressed Air Duster - Function 2Vac nozzle 1: Vacuum dust or debris (Used with Vac nozzle 2)
    Vac nozzle 2: Use to vacuum dust, debris or hair
    Vac brush: Use to vacuum static or thick dust adhesions. (Used with Vac nozzlel)
    HOW TO USE THE VACUUM FUNCTION
    1. Remove the cover.CLEVAST C19 Compressed Air Duster - Function 32. Install the vacuum nozzle 2.CLEVAST C19 Compressed Air Duster - Function 43. It can also be used with vac nozzle 1 or vac brush.CLEVAST C19 Compressed Air Duster - Function 5
  3. Specification
Power Supply: DC 5V
Input: 2A
Charging Time: 3.5-4.5H
Working Temperature: 14°F-122°F (-10°C-50°C)
Storage Temperature: -2°F-140°F (-10°C-60°C)
Product Dimensions: 8.27×5.51×2.76 in / 210x140x70 mm
Website: www.clevast.com
Email: support@clevast.com

BEFORE FIRST USE

SETTING UP

  1. Carefully remove the product from its packaging. Before use, ensure that the compressed air duster has not been damaged during transportation. If the electrical component is damaged, do not use the Compressed Air Duster. If repairs are needed, please contact customer service personnel.
  2. To prevent suffocation, keep packaging materials out of reach of children and pets.

OPERATE INSTRUCTION

  1. Hold down the power button for 3 seconds to turn on the duster and set the speed to first gear.
  2. Press the power button again to change to second gear.
  3. Press the power button for the third time to switch to the third gear.
  4. Press the power button for the fourth time to change to standby mode. If you do not do anything in standby mode for one minute, it will automatically turn off.
  5. To turn off the device while it is turned on, press and hold the power button for an extended period.
  6. During use, double click the button to turn off the light, and double click again to turn on the light.

INDICATOR INSTRUCTION

  1. The red light blinks when charging
  2. When fully charged, the green light stays on for a long time.
  3. While the unit is working, green light is on.

HOW TO CHARGE

  1. Insert the USB cable into the charging port of the air duster and connect it to a 5V/2A USB outlet, such as a USB charger, mobile phone adapter, laptop, or mobile power supply. The 5V/2A adapter is the best choice to shorten the charging time.
  2. When the device is being charged, the indicator light flashes red, and it remains green continuously when fully charged.

HOW TO CLEAN THE FILTER?

  1. Twist to detach the stainless steel filter and HEPA filter.CLEVAST C19 Compressed Air Duster - Care
  2. Wash the filters and dust cup with little brush (Dry up the filters and dust cup before use).CLEVAST C19 Compressed Air Duster - Care 1

STORAGE
To protect the life of the product, please store the product in a dry place.

TROUBLESHOOTING

Problems Reasons Solutions
The product does not work. Maybe the power is low battery. Please fully charge it before use.
Failed to power on the product. Press and hold the power button for 3 seconds to turn on the product.
No air flow from nozzle. Blocked nozzle. Replace or clean nozzle.
Clogged filter. Replace filter.
Weak air flow from nozzle. Partially blocked nozzle. Clean nozzle.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
  • Reorient or relocate the receiving antenna.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Increase the separation between the equipment and receiver.
  • Consult the dealer or an experienced radio/TV technician for help.

WARRANTY INFORMATION

We grant 1 year warranty on the product commencing on the date of purchase.
Within the guarantee period, we will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact us at: support@clevast.com to launch a warranty claim.
This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.

CUSTOMER SUPPORT

  1. If you have any product questions or concerns, please don’t hesitate to contact us directly at support@clevast.com or visit our website at: www.clevast.com.
  2. We have a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.

CLEVAST C19 Compressed Air Duster - QR Codehttp://pro.clevast.com
WWW.CLEVAST.COM 

Documents / Resources

PDF thumbnailC19 Compressed Air Duster
Instruction Manual · C19, C19 Compressed Air Duster, Compressed Air Duster, Air Duster, Duster
PDF thumbnailC19 Compressed Air Duster
Instruction Manual · C19 Compressed Air Duster, C19, Compressed Air Duster, Air Duster, Duster

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Please tell me how to disassemble the unit to see why the motor won’t start even though the light is on. My warranty has expired, and I’m an experienced engineer, but I can’t remove the lower purple piece that holds the two halves together. I think it’s glued on tight.

    🇪🇨 Alex asks Please tell me how to disassemble the unit to see why the motor won't start even though the light is on. My warranty has expired, and I'm an experienced engineer, but I can't remove the lower purple piece that holds the two halves together. I think it's glued on tight.
    Manuals+ clarified question
    Question

    How do I disassemble the CLEVAST C19 Compressed Air Duster, specifically the lower purple piece, to troubleshoot a motor that won't start?

    Answer

    The official instruction manual for the CLEVAST C19 Compressed Air Duster does not provide internal disassembly instructions, as the unit is not intended to be user-serviceable. According to the warranty information on page 12, the warranty becomes void if repairs are undertaken by unauthorized persons.

    Regarding your specific difficulty with the lower purple piece:

    • Construction: In many handheld electronic tools of this design, the base cap (the purple piece you mentioned) is often press-fitted with internal plastic tabs or secured with high-strength adhesive to maintain structural integrity during high-RPM motor operation.
    • Hidden Screws: Before attempting to pry the piece further, check under any rubberized grips or stickers on the handle, as manufacturers often hide assembly screws in these locations.
    • Troubleshooting without Disassembly: Since the light is on but the motor won't start, ensure the device is not currently plugged in. Page 2 of the manual states the product cannot be started while charging to protect the battery. If it is unplugged, try holding the power button for a full 3 seconds to ensure it is not simply in standby mode.

    If you still wish to proceed with a repair despite the expired warranty, you may contact CLEVAST support at support@clevast.com to see if they can provide a technical schematic, though this is rarely provided for consumer-grade electronics.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.