GODOX Photo Equipment Co.,Ltd.Declaration of Conformity-GODOX Photo Equipment Co.,Ltd.
User Manual for Godox models including: CS F7-120D, 705-F7120D-01, F7-120D, LED Daylight LED Fresnel, Daylight LED Fresnel, LED Fresnel, Fresnel
GODOX PHOTO EQUIPMENT CO.,LTD 111 2ABYN111 2ABYN111 111
File Info : application/pdf, 13 Pages, 3.49MB
DocumentDocument : 2023 / 11 / 15
705-F7120D-01 F7-120D 100*140mm ±2mm 105g
PDF AI Cdr
1mm 1mm
QC PASS
Wechat Official Account
: 2 : 0755-29609320(8062) : 0755-25723423 : godox@godox.com
GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com
Made in China
705-F7120D-01
LED GODOX Daylight LED Fresnel
Instruction Manual
1. 2.
3.
4. LED 5.
6.
7. -20~50 8. 9.
10.
11.
12. 13. 14. 15. 16. 17. 18. 19. 20. ROHSCE
- 01 -
21.
22.
23.
24. -- 25. 26.
LEDF7-120DAC15°-60° 5600K/DMX512
- 02 -
10
11
1. INFO 2. 3. MODE 4. DMX 5. 6. 7. 8. 9. U 10. 11. 12. 13. AC INPUT 14. AC OUTPUT 15.
9
8 7 6 5 4 3 2 1
15 12
14 13
- 03 -
F7-120D K1()
U
x 1
x 1
4 x 1
AC
x 1
AC
x 1
DMX IN
x 1
DMX OUT
x 1
x 1
x 1
x 1
F7-120D K2()
U
x 1
x 1
x 1
x 1
x 1
- 04 -
4 x 1
/
/
MODE 0-255/0-100 MODE 0-255/0-100
BLE()/ RESET() ON()/ OFF() YES()/ NO()"YES"
"Godox light"App
"Godox Light"APP APP APPAPPV3.0
- 05 -
DMX
DMX DMX DMX 1-512
DMX
DMX512
DMX
DMX
8bit
1
DMX 0 255
0% 100%
INFO
- 06 -
F7-120D
5600K
lux fc
1m
2m
71100 6600
22400 2080
3m 10700 997
5m 4180 388
5600K
lux fc
1m
2m
16200 1510
4450 413
100
3m 2040 189
5m 775 72
CRI
TLCI
U
F7-120D 120W AC 100~240V 50/60Hz 5600K 96 98 /DMX512/ 30 -20~50 509mm × 324mm × 381mm 7.62kg
- 07 -
Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:
1. Before use, please read and understand these instructions and attentions. 2. Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps. 3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. 4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns. 5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately. 6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents. 7. This product is only suitable for use in -20°C to 50°C operating environment and normal humidity environment. 8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use. 9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components. 10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result. 11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.
- 08 -
12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet.
13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.
14. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.
15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.
19. Please take off the protective cover before using.
20. This product complies with ROHS and CE certification, please refer to the relevant national standards for use and operation.
21. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.
22. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.
23. Some products are battery powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or modify this
- 09 -
product or battery. Do not heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together. 24. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty. 25. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance. 26. Machine failures caused by non-standard operation are not covered by the warranty.
Foreword
Thank you for purchasing a Godox product! The Godox Daylight LED Fresnel F7-120D supports AC power and flexible beam angle adjustment (15°-60°), and comes with various features such as stepless dimming, constant color temperature (5600K), Bluetooth control/DMX512 control, etc. It is suitable for use in multi-purpose halls, media centers, TV stations, campus TV stations, photography studios, and other venues.
Warning
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. To ensure safety, please disconnect the power when not in use.
- 10 -
Name of Parts
9 10
11
1. INFO Button 2. Bluetooth Button 3. MODE Button 4. DMX Button 5. SET Select Dial 6. Display 7. Bracket Screw 8. Thermovent 9. U-shaped Bracket 10. Barndoor Slot 11. 4-Way Barndoor 12. Focusing Knob 13. AC INPUT Port 14. AC OUTPUT Port 15. Power Switch Button
8 7 6 5 4 3 2 1
15 12
14 13 - 11 -
What's Inside F7-120D K1(Suitable for Hoisting)
Light Body x 1
U-Shaped Bracket x 1
4-Way Barndoor x 1
AC Power Input Plug
x 1
AC Power Output Plug
x 1
DMX IN XLR Port
x 1
DMX OUT XLR Port
x 1
Lamp Hanger x 1
Safety Cable x 1
Instruction Manual x 1
What's Inside F7-120D K2(Suitable for Tripods)
Light Body x 1
U-Shaped Bracket x 1
4-Way Barndoor x 1
Power Cord x 1
Safety Cable x 1
- 12 -
Instruction Manual x 1
Power Switch
Toggle the power switch button to turn on the unit after you connect the AC adapter to the power supply.
Brightness Adjustment
Short press the MODE button to enter the brightness adjustment interface, turn the select dial to adjust the brightness. The display shows the range from 0-255/0%-100%. Note: After entering the interface, you can short press the MODE button to switch the brightness display mode. The display shows the range from 0-255/0%-100%.
Bluetooth Setting
Short press the Bluetooth button to enter the wireless setting, short press the select dial to select BLE(Bluetooth switch)/RESET(Bluetooth reset), then turn the Select dial to adjust settings or reset.
Bluetooth switch: optional ON/OFF Bluetooth reset: optional YES/NO. After selecting"YES", you can reset the Bluetooth function by short pressing the select dial.
"Godox Light" App
Scan the QR code to download "Godox Light" app (both Android and iOS systems are available).
Note: The app can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile device, the light shall be reset before the normal use of the app. The app should be V3.0 or above.
- 13 -
DMX Setting
Short press DMX button to enter DMX setting interface. Turn the select dial to select address (1-512).
Connect to DMX Controller
DMX512 Note: DMX connection cable needs to be purchased separately.
DMX Practical Table
Mode 8bit
DMX Channel 1
Function Brightness
DMX Value 0 255
Parameters 0% 100%
Fixture lnfo
Short press the INFO Button to enter fixture info setting interface to check firmware version.
- 14 -
Photometric Data (F7-120D)
Spot
CCT
Unit
1m
2m
5600K
lux
71100
22400
fc
6600
2080
Flood
CCT
Unit
1m
2m
5600K
lux
16200
4450
fc
1510
413
Note: All of the above tests are based on 100% brightness.
3m 10700 997
3m 2040 189
5m 4180 388
5m 775 72
Technical Data
Model Input Power Power Supply CCT CRI TLCI Controlling Methods
Bluetooth Controlling Distance Working Environment Temperature Dimension(Unfolded state of U-shaped bracket) Netweight
F7-120D 120W AC 100~240V 50/60Hz 5600K Average96 Average98 Bluetooth control/DMX512 control/ Light body panel control Max. 30m -20~50
20 × 12.8 × 15
7.62kg
Specifications and data may subject to changes without notice.
- 15 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
- 16 -
Warning
Operating frequency:2402MHz 2480MHzBT Maximum EIRP Power: 9.44dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
- 17 -
( ) ( )
:
() 12
3
12
0755-29609320-8062
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information Customer Information
Seller Information
Note
Model
Name Address Name Contact Number Address Date of Sale
Product Code Number Contact Number
Note: This form shall be sealed by the seller.
Applicable Products The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Name Type
Circuit board
Maintenance Period(month)
12
Parts
Battery
3
Electrical parts e.g.battery charger, etc.
12
Other Items
Lamp body, lamp cover, locking device, package, etc.
No
Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site
Without warranty
Godox After-sale Service Call +86-755-29609320(8062)