Fresh 'n Rebel Smart Finder 6SFT1 User Guide
Introduction
This user guide provides instructions for the Fresh 'n Rebel Smart Finder 6SFT1. It covers initial setup, button operations, device settings and usage, battery replacement, and important legal and compliance information.
Getting Started
First-time setup:
- Turn on the device by pressing the button for 5 seconds.
- Open the Find My App on your phone.
- Click on Items and choose Add Item.
- Click on Other Supported Item.
- Choose FnR Smart Tag and click Connect.
- Give the Tag a name and add an Emoji.
Button Operation:
- Device status confirmation: Double click the device button; the device will beep. If there is no beep, the device has been turned off. Press and hold the button for 5 seconds to turn it on.
- Re-entering pairing mode: After removing the device from the App, it will beep and go into pairing mode again for 10 minutes. To pair after this period, click the device button. You can pair again after hearing a beep.
- Power off: Click the button 5 times within 2 seconds. The device will beep and turn off.
Settings and Device Operation
Locate your FnR Smart Tag when it is nearby:
- Open the Apple Find My app and select the "Items" tab.
- Tap on your FnR Smart Tag from the list.
- Tap "Play Sound" to make your FnR Smart Tag beep.
- Tap "Stop Sound" to stop the beeps.
Locate your FnR Smart Tag on a map:
- Open the Apple Find My app and select the "Items" tab.
- Tap on your FnR Smart Tag from the list.
- Your FnR Smart Tag's location will appear on the map with a time stamp.
- To navigate to the location, tap "Directions" to open Apple Maps.
Notify When Left Behind:
- Open the Apple Find My app and select the "Items" tab.
- Tap on your FnR Smart Tag from the list.
- Under "Notifications", enable the “Notify When Left Behind” toggle. You will receive a notification when you leave your FnR Smart Tag behind and it is no longer in range of your device.
Notify When Found:
- Under "Notifications", enable the “Notify When Found” toggle. When your FnR Smart Tag is seen by another Find My network device, you will receive a notification of its location. Note: Notify When Found can only be activated when your FnR Smart Tag is out of range.
Lost Mode:
- Open the Apple Find My app and select the "Items" tab.
- Tap on your FnR Smart Tag from the list.
- Under "Lost Mode" tap "Enable".
- A screen detailing Lost Mode will pop up; tap "Continue".
- Enter your phone number or email address and tap "Next".
- You may enter a message that will be shared with the person who finds your item.
- Tap "Activate" to enable "Lost Mode". Note: When Lost Mode is enabled, Notify When Found is automatically enabled. When Lost Mode is enabled, your FnR Smart Tag is locked and cannot be paired to a new device.
Replacing the Battery
Refer to the diagrams for instructions on how to replace the battery.
WARNING: Always follow all instructions and warnings closely. Do not expose to liquids. Do not use or store in damp, humid or wet environments. Do not expose to excessive heat or open fire. Avoid abrupt changes in temperature. Do not burn or incinerate.
CAUTION: This product contains a button cell battery. Do not swallow or disassemble the battery. Swallowing the battery can result in severe internal burns within just 2 hours and death in severe cases. Keep batteries away from infants and children. If the battery compartment does not close securely, stop using the product and keep it away from infants and children. If you think the batteries might have been swallowed or inserted inside any part of the body, seek immediate medical attention.
Resetting the Device
Remove the FnR Smart Tag from the Apple Find My app:
- Open the Apple Find My app and select the “Items” tab.
- Tap on your FnR Smart Tag from the list.
- Ensure "Lost Mode" is disabled.
- Scroll to the bottom of the screen and tap “Remove Item”. A summary will open; tap “Remove" to confirm.
Reset your FnR Smart Tag:
- First, remove the item from the Find My app. After the device is powered on, double-click the button. The device will beep. Long press the button for 8 seconds. After 3 seconds there will be a beep, but keep holding until the device beeps again. Release the button to complete the factory reset. The device can now be paired.
Legal & Compliance Information
General Information:
Product: Fresh 'n Rebel Smart Finder, Model Number: 6SFT1 v1 001
Manufacturer: Sitecom Europe B.V., Linatebaan 101, 3045 AH Rotterdam, The Netherlands
Conformity Information: Sitecom Europe B.V. declares that this radio equipment product is in compliance with Directive 2014/53/EU (RED), 2011/65/EU (RoHS) and all other applicable EU Regulations. The full text of the EU declaration of conformity is available at: https://www.freshnrebel.com/cedoc/6SFT1.pdf. Operating frequency band: 2402 to 2480 MHz, Maximum radio-frequency power transmitted: 0 dBm / 1 mW.
Disposal of the device: The adjacent symbol means that the product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The Waste of Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.
Disposal of batteries: This product contains a replaceable, single-use battery. Used batteries should not be disposed of in household or commercial waste. It is required by law to dispose of batteries at a battery collection point provided by local authorities or retail stores. This obligation has been put in place to minimise the impact on the environment. Only dispose of batteries when they are fully discharged. Cover the poles of partially discharged batteries with tape to prevent short circuits. Contact local authorities for information on the correct disposal of used batteries.
Privacy and Security
The Apple Find My network uses advanced encryption to ensure that no one else, not even Apple or Sitecom Europe B.V., can view the location of your FnR Smart Tag. If any Apple Find My network accessory separated from its owner is seen moving with you over time, you will be notified.