GS-SB60S Soundbar

User Manual and Product Information

Functions

Side View

The side view of the soundbar shows the control buttons:

Power On/Off: Switches the unit between on and standby mode.
Volume Up (+): Press to increase the volume.
Volume Down (-): Press to decrease the volume.
Mode Button: Short press to switch between soundbar modes. Long press to initiate Bluetooth pairing.

Diagram shows the top surface of the soundbar with these buttons.

Back View

The back view of the soundbar shows the input and power connections:

Power Input (DC-18V-IN): For connecting the power adapter.
RCA Input (L/R): For connecting audio sources via RCA cables.
AUX Input: For connecting audio sources via a 3.5mm audio cable.
Optical Input: For connecting audio sources via an optical cable.
USB Input: For connecting USB drives for music playback.

Diagram shows the rear panel with labeled ports.

Using the Remote Control

The remote control allows operation of the soundbar. The remote control sensor is located at the front of the soundbar and is sensitive to commands up to 8 meters away within a 30-degree arc. Operating distance may vary with room lighting.

Remote Buttons:

MODE: Press repeatedly to switch between soundbar modes.
Play/Pause: Press to play and pause audio.
Next: Use in USB or Bluetooth mode to go forward a track.
Power On/Off: Switches the unit between on and standby mode.
Volume +: Press to increase the volume.
Previous: Use in USB or Bluetooth mode to go back a track.
Volume -: Press to decrease the volume.
Bass Increase: Press to increase the bass.
EQ: Press to adjust the equalizer. Press and hold to turn the soundbar LED light on and off.
Bass Decrease: Press to decrease the bass.
Treble Increase: Press to increase the treble.
Treble Decrease: Press to decrease the treble.

What's In The Box

The package includes the following items:

GS-SB60S Soundbar x 1
Remote control (batteries not included) x 1
Power adapter x 1
OPTICAL cable x 1
RCA cable x 1
AUX IN cable x 1
Wall mount kits x 1

Instructions Guide

Connecting to the Mains Supply

Ensure the power supply voltage is between 100V~240V. Use only the supplied adapter. Connecting to other power sources may damage the unit. Unwind the mains cable fully, connect the plug to a mains socket, ensuring it is fully inserted. Connect the adapter to the unit via the DC input socket (DC-18V-IN).

Diagram shows a power adapter cable connecting from a mains socket to the DC Input (DC-18V-IN) on the soundbar.

Note: Ensure all audio connections are made before connecting to the mains power socket.

Bluetooth Operation

Pairing a Bluetooth Device for the First Time:

Press the POWER button on the unit or remote to switch on.
Select Bluetooth mode by repeatedly pressing the MODE button on the remote or the soundbar.
On your Bluetooth device, search for and select "GS-SB60S" in your Bluetooth settings to pair. Refer to your device's manual for specific pairing instructions.
A beep will sound upon successful pairing and connection. The unit will remain paired unless manually unpaired.

Playing Audio Wirelessly:

After pairing, use your connected Bluetooth device to select tracks. Use the remote control for Play/Pause and Skip Forward/Backward functions. Audio will play through the soundbar speakers.

Using the USB Input

Insert a USB drive to play music automatically. Select USB mode by repeatedly pressing the MODE button on the remote or soundbar. Use the remote control for playback control (Play/Pause, Skip Forward/Backward). Audio from the connected USB device will play through the speakers.

Using the RCA Input

Use the included RCA Stereo Audio Cable to connect the TV's stereo RCA (L/R) audio output sockets to the soundbar's RCA input sockets. Press MODE on the remote or unit to select RCA function. Turn on your television.

Troubleshooting: If there is no picture or interference, ensure the RCA cable is connected to the TV's 'output' RCA port. If your TV lacks an 'output' RCA port, use an alternative connection method.

Diagram shows an RCA Stereo Audio Cable connecting from the 'RCA Out' ports on the back of a TV Unit to the 'RCA In' ports on the soundbar.

Using the Optical Input

You will need an audio source with an Optical Audio Output and an Optical cable. Connect the Optical Audio cable from the audio source's optical output to the soundbar's Optical Input. Press the POWER button to switch on. Select Optical mode by repeatedly pressing the MODE button on the remote or unit.

Ensure your connected device's audio settings are set to PCM or Audio and are turned On. Audio from the connected source will play through the speakers.

Diagram shows an Optical Cable connecting from the 'Optical Out' on a TV Unit to the 'Optical In' on the soundbar.

Using the AUX Input

Plug one end of the included 3.5mm to 3.5mm Aux In cable into the soundbar's AUX In port. Before use, disconnect any cables connected to the Stereo RCA Inputs. Plug the other end of the cable into the audio output of an MP3 player or other audio source. Press the Power button to switch on. Select AUX mode by repeatedly pressing the MODE button on the remote or unit. Audio played through the connected device will be heard through the speakers.

Diagram shows a 3.5mm to 3.5mm Audio Cable connecting from an 'Audio Player' to the 'AUX In' port on the soundbar.

Troubleshooting

If the soundbar is not working as expected, check the following:

Malfunction	Possible Cause/Measures
No power / function	Check if the power is switched on at the wall. Verify the power adapter is properly connected to the power outlet.
No sound	Check if cables are properly installed. If they are, try an alternative cable to connect to your TV if possible. Ensure the unit is not in standby mode.
No sound from Bluetooth connection	Disconnect the soundbar from your device and reconnect.
Function disturbance	Switch off and unplug the unit. Wait for 2 minutes, then switch it on again. If a particular mode causes problems, try an alternative connection method such as Optical or Bluetooth.
Remote control does not work [properly]	Check if the batteries have run out and replace them if necessary. Ensure there is no obstacle blocking the remote's signal.

Wall Mount Installation

Follow these steps for wall mounting the soundbar:

Step 1: Place the paper guide on the wall where you intend to hang the soundbar. Diagram shows a paper guide being placed on a wall.
Step 2: Verify with a level gauge that the intended position for the soundbar is perfectly horizontal (zero degrees inclination). Diagram shows a spirit level checking the horizontal alignment.
Step 3: Locate the screw holes on the paper guide and mark the corresponding points on the wall with a pencil. Diagram shows a pencil marking points on the wall through the paper guide.
Step 4: Make the holes using the appropriate drill bit according to the type of wall. Insert wall plugs if necessary. Diagram shows drilling holes and inserting wall plugs/screws.
Step 5: It is advisable to leave no more than 5mm between the head of the screw and the wall to minimize the inclination angle of the soundbar. Diagram shows a screw in the wall with a 5mm measurement indicated.
Step 6: For optimal sound experience, it is advisable to place the soundbar at the same height as your ears. Diagram shows the soundbar mounted on the wall at ear level.

Features & Specifications

Features

Speakers: 30W RMS power & 75W peak power
Full-range speakers with super bass
Compatible with most TVs for home theatre sound
Wireless Bluetooth speaker
Connects to your TV, PC, Laptop, Computer, Smartphone, Tablet
LED display panel
Crisp & clear sound with deep bass
3 sound modes: Music, Movie, Voice
Base & Treble controls
Easy controls
5 Input modes: Optical, RCA, USB, AUX (3.5mm), Bluetooth
RCA/AUX/OPTICAL cables included
Remote control included (requires 2 x AAA batteries, not included)

Specifications

Bluetooth chipset: 5.0
Bluetooth profiles: A2DP, AVRCP, SPP
Bluetooth frequency range: 2.402-2.480 GHz
Wireless range: 10M (open area)
Power supply: AC100~240V/50~60Hz, DC 18V/1.3A
Speaker power: 30W (2 x 15W)
Speaker channel: 2.0

Safety Information

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not clean the apparatus near or with water.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during light storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
No naked flame sources, such as lit candles, should be placed on the apparatus.
Dispose of used electrical products and batteries safely according to your local authority and regulations.

Additional Warnings

The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquid, such as vases, shall be placed on the apparatus. The main plug is used to disconnect the device and should remain readily operable during intended use. To disconnect the apparatus from the mains completely, the mains plug should be disconnected from the main socket outlet completely. The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

Recycling Electrical Products

♻️ You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

⚡ Risk of electric shock. Do not open.

Read all instructions carefully before use and keep for future reference.

⚠️ CAUTION: RISK OF ELECTRIC SHOCK, DO NOT OPEN.

⚠️ ATTENTION: RISQUE D'ELECTROCUTION, NE PAS OUVRIR.

Support & Warranty

For further assistance with your soundbar, please contact the support team by email. All products come with a standard 12-month warranty. If you have any problems with the product, please feel free to contact us by email.

Contact Information:

Shenzhen Huilang Electronics Technology Co., Ltd.
301, Building T1, Second Industrial Zone, Xitian Community, Gongming Street, Guangming District
Email: sales3@huilatech.com

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.