iZEEKER GD850 Dash Camera User Manual

Foreword

Dear Customer,

Thank you for purchasing an iZEEKER dash cam. We value all of our customers and appreciate product and service feedback. We hope that you enjoy the quality of our products and service, and will make every effort to continue to meet your requirements and expectations in the future.

Please note that items purchased from iZEEKER are covered by a one year warranty. Let us know if there is anything we can do to assist.

Please kindly contact us via support@izeeker.co

You can also search for “iZEEKER Dash Cam” on YouTube to know more about the dash cam operation.

We look forward to serving you for many years to come.

Warmest regards,
iZEEKER Team

Follow us:

• YouTube
• Facebook

Product Description

Package Contents

• ① Front Camera
• ② Rear Camera with 6m Cable
• ③ 3.5m Car Charger with GPS Module
• ④ Type-C USB Cable
• ⑤ Windshield Protective Film
• ⑥ Suction Cup
• ⑦ Replaceable 3M Adhesive Mount
• ⑧ Crowbar

Camera Overview

Diagram Description: The diagram shows two views of the dash camera. The top view shows the front of the camera with the lens and indicator lights. The bottom view shows the back of the camera with the screen and various ports.

• ① Indicator Light
• ② Front Lens
• ③ 3M Adhesive Mount
• ④ Suction Mount Slot
• ⑤ Car Charger/Rear Cam Interface
• ⑥ Car Charger/Rear Cam Interface
• ⑦ Power
• ⑧ MicroSD Card Slot

Preparation & Installation

Preparation

The camera comes with default settings, allowing immediate use. Ensure the following:

1. Insert a memory card before starting recording. Use a brand-name U3 or higher speed Micro-SD card (32GB to 256GB max) for reliable operation.
2. Format the memory card on the camera before the first use.
3. For memory cards larger than 32GB or new cards, formatting on a computer is recommended.

Format MicroSD card on PC:

1. Connect the dash cam with the memory card to your computer using the USB cable. Select "Mass Storage" on the camera. Alternatively, use a card reader.
2. Right-click the MicroSD card on your computer and select format. (Note: OS system formatting may differ; search online or contact support for guidance.)
3. Format to FAT32 file system and avoid the "quick format" option.

Format MicroSD card on camera:

1. Navigate to system settings.
2. Find the format option.
3. Click "OK".

Installation

Clean the windshield with water or a cleaning solution and wipe dry with a lint-free cloth. Remove the label from the windshield protective film and attach the sticky side to the windshield.

Use Suction Cup to Install

Connect the camera with the suction cup as shown in the diagram. Ensure it is stable.

Diagram Description: Two diagrams illustrate attaching the suction cup to the dash camera and then to the windshield.

Use 3M Sticker to Install

Remove the sticker from the 3M adhesive and attach it to the curved area of the windshield protective film. Hold the dash cam in place for a few seconds to ensure stability.

1. Turn on the car engine.
2. Connect the camera to the car charger. Route the power cable around the windshield and tuck the wire under the trim. Insert the Car Charger into the vehicle's cigarette lighter/charging port.
3. Power up the camera by starting the vehicle. The camera will automatically switch on upon receiving power.

Diagram Description: Diagrams show the routing of the power cable inside a car and the placement of the rear camera.

Install the rear camera facing the correct direction. Professional installation is recommended to avoid damage to the dash cam.

Operation Instructions

Camera Power On and Off

Power On

When connected to a car charger in a running car, the device will automatically power on and start recording.

Note: Do not remove or insert the rear camera plug, GPS antenna, or MicroSD card while the camera is in use, as this can be distracting and may damage recordings or the device.

Power Off

1. When the car's engine is turned off, the device will automatically turn off after a few seconds.
2. Manually turn off the device by pressing and holding the power button for at least 3 seconds. Do not eject the Micro-SD card immediately to prevent damage to the last recorded file.
3. To switch the device back on, press the power button.

Mode Operation Instructions

Diagram Description: The diagram displays the dash camera's screen interface with various icons representing different functions.

• ① Wi-Fi
• ② Emergency Recording
• ③ Start/Stop Recording
• ④ Audio
• ⑤ Menu
• ⑥ Power
• ⑦ MicroSD card
• ⑧ Loop Recording
• ⑨ G-Sensor
• ⑩ GPS
• ⑪ Recording Time

Note: The displayed functions may vary in normal use. Press the audio icon to toggle audio on/off.

Video Playback and Deletion

Diagram Description: The screen shows the "Mode Selection" interface with options for Video, Photograph, Playback, and Setup.

1. Playback on camera: Stop recording, enter the menu, select "Playback", and choose "Emergency Recording" or "Normal Recording" to watch videos.
2. Playback on PC: Connect the camera to your PC using the original USB cable or use a card reader to access MicroSD card data.
3. Delete a video: On the playback screen, select the menu in the lower right corner and choose "delete current". Unlock a locked video before deleting it.

Important Functions Introduction

• Loop Recording: When the memory card is full, loop recording automatically overwrites the oldest non-protected file with a new recording.
• Parking Mode: Turn off this function while driving. When enabled, the device records for 30 seconds upon detecting car vibration while parked. For extended use, a hardwired connection to the car's fuse box (ACC and GND) is required for continuous power. Kits are sold separately.
• Motion Detection: When the camera is on, it automatically starts recording if motion is detected within 3 meters of the car.
• G-Sensor: If a collision is detected, the current footage is automatically locked to prevent overwriting by loop recording.
• Screen Saver: While recording, the screen dims after a period of inactivity, but recording continues. The white indicator light confirms the dash cam is working.

Wi-Fi and App Operation Instructions

1. Download "iZEEKER Tour": Search for "iZEEKER Tour" on Google Play (Android) or the App Store (iOS) and install it.
2. Connect Wi-Fi: Power on the dash cam, click the Wi-Fi icon to enable Wi-Fi. Find the dash cam's SSID in your phone's Wi-Fi settings and connect.

Diagram Description: Screenshots show the Wi-Fi connection process on the dash cam and a phone.

3. APP Settings: Open "iZEEKER Tour" and follow the on-screen instructions to grant necessary permissions for the app to function correctly.

Notes:

• For security reasons (iOS 12/Android 9 and later), after connecting to a Wi-Fi network without internet access, the system may prompt to connect to a network. Continue connecting to the dash cam's Wi-Fi for normal operation.
• Avoid running multiple camera apps simultaneously, as background apps may interfere with the dash cam's Wi-Fi connection.
• Maintain a connection distance within 2 meters and minimize interference from other Wi-Fi signals in the environment for optimal performance.

App Operation Instructions

Diagram Description: The diagram shows the dash camera's recording interface with various icons for different functions.

GPS Software Installation and Function

1. How to use GPS function: After connecting the dash cam with the GPS module to the car charger, the camera will automatically search for signals in open areas and record vehicle speed, latitude, and longitude.
2. How to change the speed unit: Connect the camera to the car charger, navigate to system settings in the menu, and change the "GPS SpeedUnit".
3. How to check GPS information:
   • On Phone: Open "iZEEKER Tour" and play the video.
   • On PC: To view GPS information on a computer, install the required GPS player. Download it from the official website www.izeeker.co or contact support@iZEEKER.co.

Diagram Description: The diagram shows a computer interface displaying GPS information, including speed, coordinates, and a map.

Components Description

Q&A

• Q: What hardwire kit should I use?
  A: The camera's hardwire kit must have a Type-C port and require a minimum of 2A current.
• Q: How can I use parking mode?
  A: Go to the menu and turn on this function. The device will automatically record for 30 seconds when it detects car vibration while parked. Turn off this function while driving. For long-term parking mode use, a hardwired connection to the car's ACC and GND is required for continuous power. Type-C port kits are sold separately.
• Q: The camera automatically shuts down after one minute of recording, what should I do?
  A: This might be due to the screensaver function. The flashing white light indicates recording is in progress. You can disable this function in the menu.
• Q: My battery is always dead and the low battery indicator is always displayed. How to solve this problem?
  A: The dash cam needs to be plugged into the car charger at all times. The built-in battery only sustains a few seconds of power. Unplugging the charger will cause the device to turn off in about 5 seconds to protect the last video and the battery. Frequent complete battery discharge can affect battery life. If the camera works when plugged in, it is functioning correctly. If you unplug the charger and the camera turns off, manually turn it on; it will stay on for a few minutes if fully charged.
  Note: If your camera appears used or the front/back screen does not turn on, please contact iZEEKER support for assistance.

iZEEKER Support Team

• Email: support@izeeker.co
• Facebook: iZEEKER Dash Cam
• YouTube: iZEEKER Dash Cam
• Instagram: izeekerdashcam
• Website: www.izeeker.co