Flydigi Vader2 User Manual
Basic Operation
Wireless Version
| Function | Status | Description |
|---|---|---|
| Power On/OFF | - | Turn the power switch to ON/OFF. |
| Standby | - | Out of use over 15 minutes, the controller will standby automatically. |
| Low Battery | Status LED 2 flashes red | When the battery is less than 10%. |
| Charging | Status LED 2 lights on green | Connect the charger port to the USB cable. |
| Charge OK | Status LED 2 lights off | - |
Wired Version
| Function | Status | Description |
|---|---|---|
| Power On/OFF | - | Plug in/unplug the data cable. |
| Standby | - | If it's out of use over 15 minutes, the controller will standby automatically. |
Connection Instruction
| You wish to use | Connection Mode | Support Mode | Indicator Instruction |
|---|---|---|---|
| Connect to mobile phone, tablet | Bluetooth | Bluetooth Mode | Status LED 1 blue |
| Connect to PC | 2.4G dongle | 360 Mode, Android Mode | Status LED 2 white |
| Connect to PC | USB cable | - | - |
Note: Press "+" and "Select" for 3 seconds to switch between 360 mode and Android mode. A strong rumble indicates switching to 360 mode, while a weak rumble indicates switching to Android mode.
Usage Guide
Use on Computer
Download the Software
Use your browser to access down.flydigi.com to download the software.
Play PC Games
With 360 mode, you can play games like GTA5, Assassin's Creed, Resident Evil, and Tomb Raider directly. With Android mode, you can play Android games on your computer's Android emulator.
Use on Mobile Phone, Tablet (Only for Wireless Version)
STEP 1: Download the Flydigi Game Center App
Scan the QR code [QR Code for Flydigi Game Center App] to download and install the Flydigi Game Center App. iOS version supports only below 13.4. Alternatively, use your browser to access down.flydigi.com to download.
[App Store Download Button] [Google Play Download Button]
STEP 2: Bluetooth Connects to Phone
According to Flydigi Game Center - Setting Management, click to connect to the phone. Follow the game center's guides to connect the controller.
Federal Communications Commission (FCC) Statement
FCC ID: 2AORE-VADER2
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
[Note: Chinese text "157G 双粉 表面过油" found at the bottom of the original document, likely a manufacturing or product variant identifier.]
